Monel Weldolets
Monel Weldolets
We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
Classification : Monel Alloy 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.
Classification : Monel Alloy 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.
Classification : Monel Alloy 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.
Classification : Monel Alloy 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2. According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.
About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc. Monel400 stainless steel pipe Standard Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249) Heat exchanger tube: ASTM A249 / ASME SA249, GB / T 24593-2009, HG 20537.2 Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3 Drinking water tube: GB / T 19228 Mechanical tube: ASTM A554, EN 10296-2 Size Outer Diameter Range: 9.5~2000mm Thickness Range: 0.5~20mm (Size can be customized.) Length: Up to 11.8 meters per piece. Shape Section Round, square, rectangular Application Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on; Heat exchanger tube: condenser, boiler, super heater, evaporator and so on; Industrial pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on; Mechanical tube: handrail, railings, balustrade, hence and so on. Features: 1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3 m. 2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing. 3. Thick welding, good appearance.The mechanical properties of tube could be tested. 4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015. 5. Full material traceability is guaranteed during the manufacturing process. 6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness. 7. Internal Bore: Tubes have a smooth, clean and crevice free bore.
Changhao is an expert in weldolet manufacturing. Our precision machinery and state-of-the-art facilities enable us to produce weldments of exceptional quality and dimensional accuracy. We are able to produce a wide range of standard weldments as well as customized weldments according to customer specifications. Weldolet is a type of branch connection fitting that is typically used where a standard tee is not available or not available. We have a wide range of size combinations in stock. We also produce flat weldments for flat surfaces.
Grades : Monel 400, Monel k500 Standard : ASTM / ASME SB 564 Types: Bolts Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolts, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts , T- Head Bolts , Wing Screw , Eye Bolt , Eye Bolt, Foundation Bolts, Structural Bolts. Features : Optimum strength Corrosion resistance Long service life Fine finish
Grades : Monel 400, Monel k500 Types : Elbows, Equal/Unequal Tees, Concentric/Eccentric Reducers, Full/Half Couplings, Reducing Couplings, Caps, Cross, Unions, Hex/Reducing/Flash Bushings, Plugs, Nipples, Swage Nipples, Reducer Inserts, Boss, Laterals Street Elbows & Outlets/Branch Connections (Weldolets, Thredolets, Sockolets, Flexolets, Latrolets, Elbolets, Sweepolets, Insert Weldolets, Nippolets, Brazolets, Coupolets)
Sheet and Plates Grades : Monel 400, Monel k500 Type: Seamless / Erw / Welded/ Fabricated Form: Round, Square, Rectangular, Hydraulic etc. Length: Single Random, Double Random & Cut Length End: Plain End, Beveled End, Threaded The salient features are as follows : Hot Dipped Galvanizing Epoxy & Fbe Coating Electro Polish Draw & Expansion
Grades : Monel 400, Monel k500 Range : 5 mm dia To 500 mm dia in 100 mm TO 6000 mm Length Standard: ASTM / ASME SB 164
Grades : Monel 400, Monel k500 Type: Seamless / Erw / Welded/ Fabricated Form: Round, Square, Rectangular, Hydraulic etc. Length: Single Random, Double Random & Cut Length End: Plain End, Beveled End, Threaded The salient features are as follows : Hot Dipped Galvanizing Epoxy & Fbe Coating Electro Polish Draw & Expansion
Monel.
Monel.
Monel 400: A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid,sulfuric acid, and alkalies. Used for marine Engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. Monel R405: A controlled amount of sulfur is added to the alloy to provide sulfide inclusions that act as chip breakers during machining. Other characteristics are essentially the same as those of MONEL alloy 400. Used for meter and valve parts, fasteners, and screw-machine products. Monel K500: A precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of MONEL alloy 400 with greater strength and hardness. It also has low permeability and is nonmagnetic to temperatures as low as -150F (-101C). Used for pump shafts, oil-well tools and instruments, doctor blades and scrapers, springs, valve trim, fasteners, and marine propeller shafts.
Grade : 400, monel K 500 Size : all size availbe
Monel 400 and Monel 500 (often referred to as K-Monel) are Nickel base alloys used for balls in high corrosion and/or high-temperature applications. Monel balls and K-monel balls are used in non-oxidizing corrosive environments in the chemical pump, precision valves, pharmaceutical, marine, petroleum, textile, laundry, pulp, and paper industries. Monel and K-Monel balls are commonly used with seawater dilute sulfuric acid and monel and k-monel balls are highly resistant to alkaline (caustic) solutions. K-Monel balls are used where additional strength and hardness are required.
45 Weldolet
