Material: Moâ?¥99.95%
Density: ï¼?10.2g/cc
Standard: ASTM B387
Package: Export cases (Wooden cases or Iron Drum)
Payment: Usually T/T and L/C, D/A can be accepted.
Advantage: Excellent service and short delivery
KEFENG supply Moly bars as random length piece or cut to the customs requested length, diameters are normal 1mm minimum. Molybdenum wire are also available.
Moly bars can be applied to steel-making additives, Electrode, Electric vacuum parts and industry requirements. Surface finished in Black, Cleaned and Ground.
KEFENG also supply Molybdenum Wire ,Molybdenum thread rod, nut and Molybdenum Machined parts
We provide 99.95% Moly Rod / Molybdenum Round Bar diameter 1 - 100mm For Sapphire Industry
Molybdenum ruond bar is resistant to corrosion when the humidity is below 60%. Molybdenum round bar is made of by high quality molybdenum raw material with high melting point, corrosion resistance, high density, good thermal conductivity and electrical conductivity. However, it must be protected at elevated temperatures. Molybdenum can oxidize in the presence of oxidizing gases at temperatures above 250�° C. Despite this vulnerability, Molten glass, nitrogen, inert gases, molten metals and ceramic oxides only slightly affect it.
Moly bars have high melting point so it's suitable for very high-temperature applications. It is also characterized by a uniquely low coefficient of thermal expansion and a very high level of dimensional stability.
Molybdenum Round Bar:
Purity: Mo 99.95%
Appearance: Silver gray metal luster
This product is made with Mo-1
The impurity content accords with GB3462-82 standard
Molybdenum products have the properties of high melting point, good thermal conductivity and low thermal expansion. At high temperature, they can resist oxidation and have high strength without any distortion during the procession, etc.
34873 Molybdenum Bar Suppliers
Short on time? Let Molybdenum Bar sellers contact you.
Product name: Molybdenum Bar
Standard: ASTM B387
Material: Mo >99.95%
Density: 10.2g/cc
Application:
Molybdenum bar is mainly used in drawing thin molybdenum wire, molybdenum electrode and steel-making additives. Meanwhile, molybdenum bar is also widely used in the furnace industry for radiation screens, elements, and sintering trays
Surface Finish:
Black Surface- Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides.
Cleaned- Surface is chemically cleaned to remove all lubricants and oxides.
Shiny finish- Surface is lathe shinny or polished.
Specification:
Molybdenum round bar is manufactured as random length pieces or cut to customers' desired lengths in diameters ranging from 0.080 inches to 6.00 inches.Below are most of the standard sizes of our molybdenum rectangular bars. If you do not see the size of molybdenum bar that you require, please feel free to contact us.
It is used for smelting of rare earth metals, heating elements of induction furnace, heating elements of rare earth metals, smelting of quartz, glass and for high-temperature containers.
Tungsten crucible is used in high temperature vessels for smelting of rare earth metals.
Applications: Round molybdenum bar is mainly used as raw materials for processing and alloy additives.
Component Analysis
Trademark MYT2 99.95
Chemical element content, not more than(%) Pb - Fe 0.006 Mg 0.002
Bi - Ni 0.003 P 0.001
Sn - Al 0.002 C 0.02
Sb - Si 0.003 O 0.003
Cd - Ca 0.002 N 0.003.
Classification : Incoloy Alloy
Incoloy Bar is a nickel-iron-chromium alloy with molybdenum and copper Incoloy Bar Sheet has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice copper Incoloy Bar is Especially resistant to sulfuric and phosphoric acids.
We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars. Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry.
can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available.
hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
1). Size: 25mm*25mm-250mm-250mm
2). Wall thickness: 1.5mm-25mm
3). Length: 1m-12m
4). Grade: Q195, Q235, Q345,SS400,SS540, S235JR, A36 etc
4). Certificate: ISO 9001-2008
5). Packing: Standard exporting package.
6). Delivery: Within 20 days after receiving the deposit.
7). Application: Framework of all kinds of construction and engineering; Construction joint ;Iron tower; Derrick frame ; Building structures, such as beams, bridges, transmission towers, lifting or transporting machines, shipping, industrial boilers ,product according to your needs.
Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60
Standard
BS4449,JIS,ASTM/A615
Length
6m,12m
Application
Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container)
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)
Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Flat steel refers to the steel 12-300mm wide, 3-60mm thick, rectangular in section and slightly blunt edge. Flat steel may be finished steel, or it may be used as blank for welding pipe and thin slab for rolling sheet. Main Uses: Flat steel as a material can be used for hoop iron, tools and mechanical parts, and used as structural parts of building frame and escalator.
Product
Flat bar
Standard
ASTM,BS,GB,JIS,etc
Grade
SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc
Technique
Hot Rolled
Thickness
2.0mm-24mm
Size
20mm-200mm
Usage
Widely used in various building structure and engineering structure
Delivery Time
10~20days
Shipping
1)Shipping by containers
2)Shipping by bulk ship
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Application field
The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Inconel Alloy
Inconel Bar It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.
Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Copper Bar
Copper bar is a kind of non-ferrous metal processing bar, has better processing performance, high conductivity. Mainly divided into brass rod (copper zinc alloy, less expensive), purple copper rod (higher copper content).
34873 Molybdenum Bar Suppliers
Short on time? Let Molybdenum Bar sellers contact you.
