DESCRIPTION
The SZ-48P-5A 5-Axis Series CNC machine is a mid-sized CNC for machining wood, composites, plastics and non-ferrous metals. The SZ-48P5A is built on a massive steel frame with fixed gantry, moving table design to ensure maximum rigidity at the cutting tip. The structure of the machine allows for high speed simultaneous 5 axis machining and is has a machining area of 3100 x 1850 x 950mm.
The SZ-48P5A comes as standard with a powerful 10kw HSD spindle and 8 position rotary ATC as standard. High speed machining and smooth motion are achieved using a state of the art OSAI NC control system.
APPLICATIONS
The SZ-48P5A is a state of the art 5-Axis machining centre with full 5 axis interpolation. Designed with mould manufacture in mind the SZ-48P5A is an extremely rugged machine with an extra heavy duty gantry and machine table for maximum rigidity and strength to provide high speed machining in all 5 axes. Equipped with a state of the art Osai digital closed loop NC control system the machine is capable of machining at speeds up to 20m/min. The SZ-48P5A 5 Axis comes as standard with a 10kw HSD spindle and HSK 63F tool clamping for extra precision. The rotary ATC with 8 positions tool carousel can complete tool changes in under 8 seconds, making it a true high speed machining centre for the mould, wood, plastic and composite industries.
The standard table size of 1220 x 2440mm allows machining of large parts in full 5 axis. The open design of the machine adds greater flexibility as larger parts can be indexed and passed under the gantry for infinite length machining. Due to the flexibility of the MAXI-M9 it is commonly used for mould making, machining moulds in wood, resin tooling board, EPS and composites, trimming of vacuum formed mouldings, plastic fabrication, GRP machining, props and model making, profiling, solid surface machining and contouring.
STANDARD CONFIGURATION
Travelling area: 1850 x 3100 x 950mm
Extra heavy duty welded steel frame and gantry for maximum straightness and rigidity
12Kw HSD Spindle
8 position rotary ATC with HSK63F precision tool clamping
THK lubricated for life linear rails and guide blocks
Yaskawa servo drivers and motors for high power and speed
Osai PC interfaced Numerical Control System
Automatic machine lubrication system
T-Slot clamping table
MPG XYZ Hand Wheel for easy origin and work piece setting.
Tool setting device
One starter set woodworking tools
3 x collets, choice from 1-20mm (imperial available if preferred)
Delta Inverter 0-22000rpm control
Schneider Electronic Spare Parts
Japanese OMRON limit switch
SEAZEA double sheathed, fire retardant and highly flexible towline cable can be bent 300,000 times
Igus cable chain carrying system
Electronic safety mat, protection net around the machine
Voltage: 3PH 415V 50HZ
OPTIONS
Oil Mist cooling system for cutting non-ferrous metals
T-slot/vacuum combination table with Becker vacuum pump
Extra tool holders
CNC cutting machine for cutting soft materials like fabric, and leather, etc., automatic oscillating knife cutting machine, Intelligent CNC, no need knife dies, reducing costs and increasing efficiency.
Maximum Turning Diameter 12mm
Maximum Turning Length 100mm
Spindle Size Up to 12mm
Spindle Motor Power Fanuc Continuous 1-2hp/415v
Spindle Motor Power Fanuc 30 Min 2hp
Max Spindle Speed 1440rpm
Standard Chuck Size 12mm
X-Axis Stroke 100
manualy multi drilling machine as per your reqiurment
PET BOTTLES (aprox. 95% CLEAR - 5% COLORS) BALES.
Post consumer from sorting line.
Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe.
Can load in 1x40HC container aprox. 26 - 28 MT.
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
30049 Mold 5 Axis Cnc Engraver Machine Suppliers
Short on time? Let Mold 5 Axis Cnc Engraver Machine sellers contact you.
Description
This 5 Axis CNC Router is a new design table moving 5 Axis CNC Router. It is Mainly for soft metal mold making (Such ad aluminum, copper, soft metal, and so on)and the aluminum profile working process.
Applications
Mold industry:FRP wood mold, casting wood mold, foam, wood, resin products, sludge model, various non-metal mold five-axis processing.
Composite materials industry:carbon fiber parts, glass fiber reinforced plastic molds, glass steel parts, plastic parts, rubber products, sanitary products, and other composite products, trimming and punching.
Ceramic sanitary industry:five-axis processing of various gypsum products such as plaster molds.
Furniture industry: solid wood furniture, all kinds of furniture parts, stair elbows, and other five-axis processing of furniture.
Features of 5 Axis CNC Router
This is a heavy-duty 5 Axis CNC Router with Syntec controller with high precision, easy operation, and productive, and very effective.
The 5 Axis Machining Center with high speed traveling speed and stable working function. Durable and rigid.
This 5 Axis CNC Router Machining Center with 5 synchronizing interpolated axes and Real-Time Tool Center Point Rotation (RTCP); Z-axis height can be extended to cater for extra-large and extra-thick 3D processing.
Why Choose Us
Professional CNC Router (forsuncnc.com) manufactured with more than 10 years experience in CNC Router design, manufacture, machining, inspection, etc
All the spare parts are a world-famous brand like Siemens controller from Germany, Yaskawa servo motors from Japan, Igus cable from Germany, ABB from Switzerland, and so on.
All the machine bodies are through whole welding, heat treating, sandblasting and three times painting to make sure the machine body will be never out of frame or painting problem. It will make your machine always work in high precision, fast speed like the new machine.
7*24 hours service after the sale with English, Russia, Spanish or Portuguese, etc.
3 years warranty for main spare parts while easy broken parts are 1.5 years.
Feel free to contact us if you have any questions about our CNC Routers. We are on GMT +8 and reply to all emails within 12 hours.
5. Stepping motor: high reliability, high torque at low speeds
6. Water cooling:Â High cooling efficiency is suiting for long working time
Item Description
Model 6040RW3-22
Outside dimension 920*631*267mm(LxWxH)
Working platform size 480*770mm(LxW)
Frame Material 6061 Aluminium alloy + metal plate
Max. Feeding height 120mm(From base of Z axis to platform)
X, Y, Z Working Area 600x400x120mm
IRUS Engineering Pvt. Ltd. India Recognized for Designing and Manufacturing, top-of-the-line CNC Gantry Machining Centers, CNC Double Column Machines, CNC Horizontal Boring Mills, CNC Duplex Boring, CNC Moving Column Machining Center, CNC Long Travel Moving Column Machining Center to provide unmatched Precision and Efficiency for our clients.
These High-accuracy, High-speed CNC Machines cater to industries like Aeronautics, Defence, Railways, Energy, Oil & Gas, Moulds & Dies, Naval, Construction, Pharmaceuticals.
These state-of-the-art machines are built using superior engineering strategies, ensuring Reliability, Durability, and Cost-Effectiveness.
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
The machine is independently controlled by five sets of servo motors feeding axis, spacing, upper cutter axis, lower cutter axis, and outer diameter axis.
The computer operation is simple and the manual test is consistent with automatic production: adjust the spring seal, input the reference diameter, pitch, and a number of turns to simplify the work of the machine, which saves a lot of adjustment time than the general conventional machine.
The zero return position of each working axis can be set freely (according to the actual adjustment needs)
The function of accelerating and decelerating the wire decoiler can be adjusted directly in the computer interface, and the spring production procedure can be modified without stopping the machine, making the production more effective.
It can be equipped with a free height detector and optical projection detection equipment, which can automatically correct the spring pitch to ensure the accuracy and consistency of the spring.
When the wire breaks or runs, the machine is abnormal, and the shutdown information is displayed on the display screen.
(1). High performance 5 axis CNC center machine controller.
(2). The standard spec includes electronic hand wheel.
(3). Selection of high -quality casting materials, more compact.
(4). 10 tools ATC.ISO20 spindle type, 24000rpm spindle speed.
(5). USB/U dis/RS232COM etc many kinds of communication mode, to help users achieve
different data transmission and software upgrades easily.
(6). Frequency conversion water cooling motor, low noise, high speed and good durability.
(7). Perfect self diagnosis function, internal and external status real-time display, alarm
immediately when abnormal.
(8). Macro variable, macro definition programming, realizing a variety of logical relations. Support
macro program with parameters, convenient to the user programming.
(9). Can run ISO G code
(10). Graphic simulation function: show the graphics of the processing program and the tool path
of the actual operation, tool path simulation processing without controlling the operation of the
machine , to exam if the preparation process is correct.
(11). Multi interface selection: support multi language interface display, automatic fault alarm.
Processing information display, processing time, the number.
(12). Parameter tabular: Input / output address number setting, only need to fill in the
corresponding value in the configuration table.
(13).Applicable industry: technology development, advertising design, art, vocational technical
college Education & Training CNC and DIY enthusiasts.
4 or 5 Axes machine Double tables 4 Axis CNC Wood Carving Machine For Plywood Bent Chairs Making
SMARTECH CNC machining centre guarantees high performance and quality at a price that will make you happy. With a solid and compact structure, it provides reduced setup and restart times.
Work table:
The standard Grace work table allows you to machine medium size and large work pieces.
Work unit:
The powerful electro spindle ensures excellent finishing and high speeds on all types of material
Application materials
Various kinds of solid wood, rubber and plastic ABS, polyurethane, glass fiber, carbon fiber and other composite materials for slotting, chamfering, milling, hook groove and other processes and angles of high precision, high efficiency processing.
Fields of machine application
Aerospace
Technical articles / Insulators
Street furniture
Motor Caravans
Automotive Appliances
Sports and leisure
Thermoformed products
5-axis machining center for high speed machining
Movable-bridge machining centre specifically designed for high speed processing of plastic and composite materials, providing exceptional motion dynamics to ensure high productivity. The advanced structural design avoids machining vibration and achieves excellent finishing quality.
very large working areas for the maximum production freedom
broad variety of working areas (single zone or tandem cycle)
the compact design enables handling and transport without removing any mechanical part, ensuring reduced time for machine restarting.
A dedicated software for trimming path self-learning enables creating the cutting program directly from the sample workpiece on the machining centre, thanks also to a mobile push-button panel complete with joystick and touch-screen for the control of all CNC functions.
Stamping machines, Assembly lines, Whole set of measurement tools
Precision Processing:
CNC machining, CNC milling and turning, laser cutting, drilling, grinding, bending, stamping, welding, and so on.
Drawing format:
JPEG,PDF,DWG,DXF,IGS,STEP.CAD or according to your sample
Material:
Stainless Steel, Brass, Aluminum, Steel, Carbon Steel, Titanium, Plastic. Or other Exotic Alloys
Surface Finish:
Anodize, Blacken, Polishing, Plating, and Blasting
Tolerance:
+/- 0.002â??0.20 mm / can also be customized.
Inspection:
100% inspection before shipping
Payment Terms:
30%T/T in advance, the balance before delivery; Paypal is acceptable
Quotations:
Drawings (CAD, STP, PDF formats) or Sample
Quantities; Materials; tolerance; surface treatment or other special requirements
Our engineer can offer technique supports to design or modify drawings according to requirements from customers
Lead Time:
Sample Lead Time: 3~7 days
Production Lead Time: 10~30 days based on different products
Shipment time: 7 days with DHL/FEDEX/UPS; 20 days with fast Ocean shipment; 30~45 days with Normal Ocean Shipment
Quality Guarantee:
We have IQC inspect all raw materials at the incoming department
IPQC inspect and measure the machining parts during mass production
OQC inspect and measure the finished products according to Drawings and SIP documents with MIL-STD-105E
We guarantee that all products/parts comply with drawing and other quality criteria requirements on the contract and approval documents. We will rework all defective products or refund to customers if receive non-good products.