Technical specification:- -drilling in m.S.:25 -end milling in m.S.:20 -tapping in m.S.:20 -boring in m.S.:30 -spindle hole taper:mt-3 -spindle travel:150 -spindle speeds [rpm x steps]:1002650 x 8 -diameter of ram:72 -spindle autofeed ranges:fine feed -dist. spindle center to column:206 -work table:255 x 460 -longitudinal travel:350 -cross travel:206 -diameter of column:90 -drill-head motor:1 hp / 1440 rpm -head motor v-belt:b-46.
Machine Capacity 38/300 Drilling Cap. 38 Face Mill 60mm End Mill 20mm Drilling Head Taper Spindle M.T. 4 Spindle Travel 240 Speeds No. Range of Spindle 8 Spindle Speed Min./Max. 70 to 2000 Feeds No. Range of Feed Manual Working Range Distance from Spindle Centre to Column Face 300 mm Max. Distance From Spindle to Work Table 500 mm Baste Plate & Column Column Diameter 108 Base Plate Diameter of Table 225*835 Base Area 520*755 No. of Slot 3 Power Drilling Motor 1.5 HP 1400 RPM Weight (kgs.) Approximate 475 kg. V-Belt No. B-58
Drilling cum milling machine Drilling in m.S.-40, drilling head spindle hole taper -mt-4, spindle travel-250, diameter of ram-78, spindle autofeed ranges-0.05 & 0.09 mm/rev., max. Drilling radius-990, machine measurement-1200 x 780 x 2100
Pillar drilling machines 800 kgs 1250 x 700 Cap.12 mm to 65mm
Technical specification:- -drilling in m.S.:25 -end milling in m.S.:20 -tapping in m.S.:20 -boring in m.S.:30 -spindle hole taper:mt-3 -spindle travel:150 -spindle speeds [rpm x steps]:1002650 x 8 -diameter of ram:72 -spindle autofeed ranges:fine feed -dist. spindle center to column:206 -work table:255 x 460 -longitudinal travel:350 -cross travel:206 -diameter of column:90 -drill-head motor:1 hp / 1440 rpm -head motor v-belt:b-46.
These types of Different Drilling Air Tool We are Exporting in the Global Market,
Drilling cap. In Steel 25 Drilling cap. C. I. 32 Tapping in M. S. 12 Spindle center to col. 205 Spindle travel 145 Dia. of column 90 Dia. of RAM 72 Size of table 250 x 460 No. of spindle speed (8 speed) 105 to 2650 RPM Taper in spindle base MT-3 Drill Motor (gear drive) 1 HP Total height 1425 V-Belt size B-49 Longitudinal Travel 400 Cross Travel 206 Net Weight 400 Kgs
Milling cum drilling machine, piller type drill machine.
SPECIFICATION : SJR 40 F Drilling cap. In Steel 40 Drilling cap. C. I. 45 Tapping in M. S. 20 Spindle center to col. 890 / 387 Spindle travel 235 Spindle nose to base 900 / 185 Dia. of column 165 Dia. of RAM 72 Size of table 380 x 280 x 275 Overall base size 1270 x745 x200 No. of spindle speed (8 speed) 90 to 2630 RPM Taper in spindle base MT-4 Machine area of base 1200 x 605 Drill motor (gear drive) 1.5 HP & 1 HP Total height 1900 V-Belt size A-24, B-47
Drilling cap. In Steel 25 Drilling cap. C. I. 32 Tapping in M. S. 12 Spindle center to col. 670 Spindle travel 145 Spindle nose to base 650 Dia. of column 130 Dia. of RAM 72 Size of table 290 x 235 x 235 Overall base size 930 x 635 No. of spindle speed (8 speed) 105 to 2650 RPM Taper in spindle base MT-3 Machine area of base 660 x 500 Drill motor (gear drive) 1 HP & 0.5 HP Total height 1425 V-Belt size A-23, B-50 Net Weight 450 Kgs
Drilling cap. In Steel 38 Drilling cap. C. I. 45 Tapping in M. S. 15 Spindle center to col. 320 Spindle travel 240 Spindle nose to base 1000 Dia. of column 121 Dia. of RAM 72 Size of Sq. Table 375 x 475 Overall base size 720 x 470 No. of spindle speed (8 speed) 90 to 2630 Taper in spindle base MT-3 Machine area of base 485 x 445 Drill motor (gear drive) 1.5 HP 1440 RPM Total height of machine 1800 V-Belt size B-58 Net Weight 325 Kgs.
Drilling cap. In Steel 25 Drilling cap. C. I. 32 Tapping in M. S. 12 Spindle center to col. 230 Spindle travel 145 Spindle nose to base 1000 Dia. of column 90 Dia. of RAM 72 Size of Round Table 365 Overall base size 570 x 345 No. of spindle speed (8 speed) 105 to 2650 Taper in spindle base MT-3 Machine area of base 260 x 350 Drill motor (gear drive) 1 HP 1440 RPM Total height of machine 1625 V-Belt size B-49 Net Weight 200 Kgs.
Radial & pillar drill machine tapping machine, milling cum drilling machine, & all kinds of workshop machinery items.
Pillar drilling machine, radial drilling machine, bench drilling machine, milling cum drilling machine, auto feed drilling machine, all gear drilling machine, all gear auto feed drilling machine.Manufacturer
40 mm capacity Radial type Drilling machine (Back Geared Drive) with S.G.I Steel Gears, Molded Coolant Tank in Base and fully Oil bath Lifting Gear box. With 2 Electric Motor, 2 R/F Switch and 2 V-Belts. With Box Table. Drilling Capacity 40 mm In Mild Steel Drilling Capacity 45mm in Cast Iron Tapping Capacity 25mm in Mild Steel Tapping Capacity 30mm in Cast Iron SGI Steel Gears Heavier than ordinary Cast Iron Gears. Spindle Tapper MT-4 Dia. of Ram 78 mm Dia. of Column 165 mm Spindle Travel 260 mm Working Area of Base 870 x 760 mm Machine Base LxBxH 1290 x 760 x 190 mm Max. Min. Distance Spindle Nose to base 925 mm to 230 mm Max. Min. Distance Spindle center to column 875 x 360 mm
25mm capacity Radial Drilling Machine. Max. Drilling Capacity in Mild Steel (MS) 25mm Max. Drilling Capacity in Cast Iron (CI) 30mm Max. Drilling Stroke/Spindle Travel 225mm
25 mm capacity Pillar type Drilling machine with S.G.I Steel Gears. With Electric Motor, Reverse/Forward Switch and V-Belt. Max. capacity in Mild Steel 25 mm Spindle Taper MT-3 SGI Steel Gears (Heavier than ordinary Cast Iron (casting) gears. Dia. of Ram 72 mm Dia. of Column 90 mm Spindle Centre to column 250 mm Table Size: - 345 x 345 mm Max. Distance Spindle nose to Table 710 mm Max. Travel of Spindle 150 mm Motor 1 HP 3-Phase
40 mm capacity Radial type Drilling machine with All Geared (Fully oil bath 9 speeds gear box with single speed Electric Motor), Heavy Duty and Successful Auto Feed (2 Feed) with Fine Feed Gear Box, Fully oil bath Head Lifting Gear box, Harden gears with complete Electricals (2 HP and 0.5 HP. Ele. motors and Panel board) and Molded Coolant Tank in base. With Box Table. Drilling Capacity 40 mm In Mild Steel Drilling Capacity 45 mm in Cast Iron Dia. of Ram 78 mm Dia. of Column 165 mm Auto Feed 0.04 and 0.08 (mm per spindle rotation) Spindle Travel 260 mm Machine Base LxBxH 1290 x 760 x 190 mm Max. Min. Distance Spindle Nose to base 925 to 230 mm Max. Min. Distance Spindle Center to column 875 x 360 mm Size of Box Table 305 x 305 x 380 mm Main Motor 2 HP 1440RPM Lifting Motor 0.5HP 1440RPM
Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
