This plastic capacitor film is specially used for capacitors, power electronics capacitors, film capacitors, dc capacitor, ac capacitor and so on. This bopp film is manufactured with high purity, high isotacticity polypropylene. It has high bdv, excellent mechanical strength.
Class x1 and x2 capacitor.
Series MPF(CBB21) MPB(MKP21) Applications Blocking,coupling,decoupling,filtering ,by-pass,it is popular for using as filter in PFC circuit of SMPS ,Ballast,Adapter Rated Voltage 100VDC,250VDC,400VDC,630VDC Reference specification IEC60384-16(GB/T 10190) Climatic category 40/105/21 Rated Temperature 85℃ Operating Temperature Range -40℃-+105℃, (+85℃~+105℃);derating factor 1.5% per ℃ for UR(VDC) Dielectric Metallized Polyester film Capacitance Tol. ±5%(J),±10%(K), Voltage Proof 1.6xUr(VDC),2s(between terminal) Dissipation Factor ≤0.10%(1KHZ at 20~25℃) Insulation Resistance ≥30000MΩ,Cr≤0.33µF(20℃,100V,1 min);10000s,Cr>0.33µF(20℃,100v,1min) packing Cutting,kinked/loose&PE Bag
JFMA - Box Type Metallized Polypropylene Film Capacitor For Capacitive Divider Specifications Operating Temperature -40 C +105 C JFMA-Box-Type -Metallized-Polypropylene-Film-Capacitor-For-Capacitive-Divider Rated Voltage 400V(230VAC) 630V(275VAC/305VAC/310VAC) Capacitance Range 0.0047 3.9F Capacitance Tolerance 5%, 10% Insulation Resistance C0.33 f ; IR 50000MOhm C 0.33 F ; IR 15000MOhm Dissipation Factor 0.1% max. at 1KHz, 20C Dielectric Strength 160% of rated voltage for 60 sec.
Polypropylene Roll Capacitor Film Thickness: 2micron-12micron Width: customize FEATURE: 1..High Dielectric Breakdown Strength 2.good thickness tolerance 3.low MD heat shrinkage
MKP interference suppression X2 capacitor EMI filters X2-MKP are non-inductively wound with metallized polypropylene film as dielectric and electrode, with copper-clad steel leads, encapsulated in solvent-resistant and self-extinguishing UL94 V0 thermoplastic case, with epoxy resin sealed. They provide interference suppression with safety approvals. They are Suitable for across the line capacitors, EMI filters, Spark killer circuits, etc. Features: Self-healing properties High moisture resistance Overvoltage stress withstanding Flame-retardant plastic case and epoxy resin Specifications: Operating temperature: -40 -- +100C Capacitance range:Capacitance range: Capacitance tolerance: 10%(K) Rated voltage:275VAC (50Hz/ 60Hz) Dissipation factr:0.1% max. at 1KHz, 25C Insulation resistance:15,000 MOhm min. for Q0.33UF 5,000 MOhm*uF/C min. for C>0.33uF Dielectric strength: 1200VDC for 60 sec. or 2000VDC for 1 sec.
Apply to 50/60hz, high quality, wire lead-out structure, widely used as the start-up and running capacitor that is special for micro water pump, cleaning machine washing machine, and single-phase water pump motor. Normal carton
Apply to 50/60hz, high quality, wire lead-out structure, widely used as the start-up and running capacitor that is special for micro water pump, cleaning machine washing machine, and single-phase water pump motor.
Axial Features 1. Quick transient design 2. High Precise Capacitance ±3%, ±5% 3. Very Low Dielectric absorption factor 4. Very Low Dissipation factor 5. Very Low ESR 6. Very Low Inductance 7. Excellent handling of high current audio pulses
Jb capacitors manufactures x2 metallized polypropylene film capacitor, which also named interference suppression capacitors or x2 safety capacitors, and we sell quite competitive prices. This x2 safety capacitor has 3 approval markings: vde, enec and ul. Following are x2 metallized polypropylene film capacitor features, specifications and drawing. Bulk or ammo
JFV - X2 Metallized Polypropylene Film Capacitor (275VAC, 305VAC, 310VAC) Specifications Operating Temperature -40C~ +110C JFV - X2 Metallized Polypropylene Film Capacitor (275VAC) Voltage Rating 275VAC, 305VAC, 310VAC Maximum Continuous DC Voltage (at 110C) 388VDC for 275VAC Safety Approvals ENEC, VDE, UL,cUL. Capacitance Range 0.001 ~ 2.2F Capacitance Tolerance std ±10% Insulation Resistance CR 0.33 F, I.R 15,000M CR>0.33 F, I.R 6,000S (M¼F) Dissipation Factor tg 0.0010 1KHz Testing Voltage 4.3UR DC /5s
non-inductive,plastic case sealed with epoxy resin provides interference suppression with,VDE,ENEC and UL approvals opertating temperature:-40c~+110c voltage rating:250/275/305/310VAC capacitance range:0.001~202uF capacitance tolerance:+/-10%
BOPP film density:0.90±0.005 g/cm³ thickness:2.2-13um tensile strength:100mpa elongation at break:40-200 heat shrinkage:(120,10min)(120,10min) coating square reistance:2-4/6-9 Thickness:2um.2.2um.3um,4um.5um,6um,7um,8um,9um width: 30-100mm Marin: 1.5-2.5mm Base film:OPP PET Normal thickness :2.2m ~15.0m 1.9m ~12.0m Margin type: Single Coating metal:Aluminum Coating side: Single Edge structure:No heavy edge Square resistance Tolerance 1.5±30% 2.0±30% 2.5±30% 3.0±30% 3.5±30%
BOPP film density:0.90±0.005 g/cm³ thickness:2.2-13um tensile strength:100mpa Base film:OPP PET Normal thickness :2.2m ~15.0m 1.9m ~12.0m Margin type: Single Coating metal:Aluminum Coating side: Single Edge structure:No heavy edge Square resistance Tolerance 1.5±30% 2.0±30% 2.5±30% 3.0±30% 3.5±30%
-AL metalized polypropylene film -AL metalized polypropylene safety film -ZN/AL metalized polypropylene film with heavy edge -ZN/AL metalized polypropylene safety film with heavy edge -ZN/AL MPP film with heavy eade and slope metallzied film -AL metalized polyester film -ZN/AL metalized film with wave cut. thickness:2.2micron-10micron width:30-100mm margin:1.5-2.5mm
Characteristics 1. Highly reliable because of its excellent Self-Healing performance. 2. Dissipation Factor is normally low and it is #stable #against #high #frequency and change of temperature. 3. Recommended for #high- #frequency #circuits like s-curve compensating circuit Specifications: Operating Temperature: -40â?? TO + 85â?? Rated Voltage:DC 100V, 250V, 400V, 630V Capacitance Range:0.01 TO 8.2Mfd Capacitance Tolerance: ±5%, ±10%, ±20% Dissipation Factor: 0.001 at1KHz (Typical 0.002 Max)
1. Ideal for high frequency circuits high-current loading and high definition TV, monitor display S-shaping correction. 2. The armor is a powder coated flame resisting epoxy resin.(UL 94 V-0) 3. Temperature coefficient of capacitance is negative and almost constant. 4. Small tan ,good high-frequency performance and with temperature changes,suitable for high voltage. 5. High insulation resistanec,long life due to self-healing effect. 6. Non-inductive structure made by a special metal spraying process. BOXES/1000.
Raw Material : PP or BOPP Raw Material : Virgin material or recycled Color : All kinds of colors or as the customers requirement Printing : One side or both sides in multi-colors with film or non film Width : From 260-1300mm Length : As the customer’s requirement Weave : 10x10,11x11,12x12,14x14 or be customized Denier : 450D to 1500D Weights/m : 50g to 200g Surface Dealing : Anti-slip or plain Top : Heat cut or hemmed Bottom : Single folded, double folded, single stitch, double stitch Liner : coated or with liner bag for moisture proof Usage : rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing : 500pcs(bale),1000pcs(bale) or can be customized Minimum Order 20 feet container Delivery Time : 10-30days after place an order or negotiation Trade Term : CIF, CNF, FOB QINGDAO Special Requirements : As the customers requirements Treat : UV treated or as the customers requirement Loading qty. : 12 Tons/20’container, 23tons/40’hq. We can make all kinds of size
Raw Material: PP or BOPP Raw Material: Virgin material or recycled Color: All kinds of colors or as the customers' requirement Printing: One side or both sides in multi-colors with film or non film Width: From 260-1300mm Length: As the customer’s requirement Weave: 10x10,11x11,12x12,14x14,12×11or be customized Denier: 450D to 1500D Weights/m²: 50g to 200g Surface Dealing: Anti-slip or plain Top: Heat cut or hemmed Bottom: Single folded, double folded, single stitch, double stitch Liner: coated or with liner bag for moisture proof Usage: rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing: 500pcs(bale),1000pcs(bale) or can be customized Minimum Order20 feet container Delivery Time: 10-30days after place an order or negotiation Trade Term: CIF,CNF,FOB QINGDAO Special Requirements: As the customers' requirements Treat: UV treated or as the customers' requirement Loading qty.:12tons/20’container, 23tons/40’hq. we can make all kinds of size
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.