Promotion Price Fiber Laser Cutting Metal Machine Laser Metal Cutter 6mm Carbon Steel Lesar Cutting Machine With High Speed adopts RAYCUS/ IPG laser source which has international advanced laser technology. Equipped with an efficient transmission system by Taiwan high-precision gear rack after grinding process and high-precision linear guide. Advanced Au3tech control system, group into high precision CNC fiber laser cutting machine. Main Features of Fiber Laser Cutting Machine 1 - Application of gantry structure and integrated cast cross-girder to achieve higher rigidity, stability, shock resistance. 2 - High-performance laser source and stable operating Au3tech system which makes the best cutting effect. 3 - The machine owns a perfect cooling system, lubrication system, and dust removal system, to ensure that it can operate stably, efficiently, and durably. 4 - The machine is capable of automatic height adjustment to maintain constant focal length and stable cutting quality. 5 - The specialized CAD / CAM automatic programming software and automatic nesting software aim to maximally save raw materials.
Promotion Price Fiber Laser Cutting Metal Machine Laser Metal Cutter 6mm Carbon Steel Lesar Cutting Machine With High Speed adopts RAYCUS/ IPG laser source which has international advanced laser technology. Equipped with an efficient transmission system by Taiwan high-precision gear rack after grinding process and high-precision linear guide. Advanced Au3tech control system, group into high precision CNC fiber laser cutting machine. Main Features of Fiber Laser Cutting Machine 1 - Application of gantry structure and integrated cast cross-girder to achieve higher rigidity, stability, shock resistance. 2 - High-performance laser source and stable operating Au3tech system which makes the best cutting effect. 3 - The machine owns a perfect cooling system, lubrication system, and dust removal system, to ensure that it can operate stably, efficiently, and durably. 4 - The machine is capable of automatic height adjustment to maintain constant focal length and stable cutting quality.
Laser cutting (84561000)
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
We supply attractive variety qualitative range of Toilet and Bathroom accessories. Features of our Shower door hinges · CNC machined precision pivot pins · Dimension 90mmx 55mm (varies from hinge to hinge) · Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze. · Solid brass, Zinc as per customer choice. · Glass to Glass, wall to Glass shower door hinges. · Closing angles 90°, 135°,180°degree. · Straight edges, beveled edges, round edges. · Glass preparation- Mickey Mouse ear, square and round glass cut. · Glass thickness 8mm-12mm. · Glass door weight 35~36Kgs with two hinges. · Glass door weight 54Kgs with three hinges. · Also available in some models of shower door hinges with adjustable hinges. · Also available in auto- self closing for some models. · Also available in Bi-fold Hinge.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Steel
Laser Type:Fiber Laser Cutting Area:1500*3000mm 1500*4000mm Cutting Speed:25m/min Graphic Format Supported:AI, PLT, DXF, BMP, DST, DWG, LAS, DXP Application:Laser Cutting Condition:New Cutting Thickness:0-30mm CNC or Not:Yes Cooling Mode:Water Cooling Control Software:PC control with Cypcut Place of Origin:Shandong, China (Mainland) Brand Name:Running Certification:CE, ISO, SGS, laser steel cutting machine Warranty:3 years, 3years Function:Cutting Metal Materials Laser power:500W / 1000W / 2000W / 3000W/4000W Color:White&Black Laser source:Raycus IPG NLIGHT Laser Source Control system:PC Control with Cypcut Power supply:AC110V/220V+10% Driving system:Japan Yaskawa Servo Motor Compatible software:Coreldraw, Autocad, Photoshop
Hardwood and softwood logs usa and canada souther yellow pine logs, eastern white pine logs walnut logs, red oak logs, cherry logs, african teak logs & various other specie lumber sd and kd, syp lumber , ewp lumber lumber : ashwood ,redoak, white oak ,walnut sawn timber hardwood : red merantiwood malaysia european hardwood, beechwood,ashwood,red oak ,white oak , whitewood : ad ast, kd ,kd s4s white wood and wood pallets austrian whitewood, bosnian whitewood, romanian whitewood, usa pine wood brazil whitewood plywood :china ,malaysia,indonesia ,vietnam commercial plywood, veneer plywood ,melamine plywood, hpl plywood mdf: china ,thailand ,malaysia plain mdf ,melamine mdf , veneer mdf , high glossy mdf , film faced plywood (marine plywood): china,india,vietnam shuttering plywood solid chipboard, particular board and osb board doors and frames.
CNC 3KW fiber laser cutting machine is specially designed for high-speed and high-quality cutting of various sheet metals and cutting various cross-section metal pipes and profiles. This series of machines are specially designed for small and medium enterprises. Reliable components, outstanding design solutions, and assembly quality from the worldâ??s leading companies make this model stand in sharp contrast with rival manufacturers of similar equipment. 3KW fiber laser cutter is the most popular power and bestseller series. This machine is a classic model, widely used in daily life, such as stainless steel kitchen utensils, storage cabinets, and other cabinet processing, closely related to peopleâ??s daily life. Used for cutting various metal plates and pipes (adding pipe cutting device), mainly used for stainless steel, carbon steel, galvanized plate, electrolytic plate, brass, aluminum, various alloy plates, rare metals, and other metal materials. Product Advantages of 3kw fiber laser machine Cypcut control system The design screen has a vertical screen display, different from the traditional horizontal screen display with good response speed, higher contrast, wider view, low power consumption as well as high resolution. Professional cutting software CypCut, supports DXF, PLT, LXD, and other graphic data formats, supports commonly used editing and typesetting functions, automatically distinguishes between internal and external modes, saving time and effort, automatic typesetting, supports multiple edges finding methods, precise positioning, and unique processing sequence Browse function, set cutting path with one key, make processing more efficient. Max fiber laser generator Max fiber laser generator, based on a modular design, has good beam quality, high stability, compact structure, and water cooling. The laser can be adjusted continuously, and the beam is transmitted through the optical fiber and QBH connector, which is very suitable for laser cutting, laser welding, etc. The laser is very suitable for system integration with robots or machine tools and is widely used in laser cutting, welding, 3D printing, electronics, auto parts, aerospace, and other fields. Water chiller The water chiller has a high and low-temperature control system that can simultaneously cool the fiber laser and QBH crystal optics, saving cost and space. WSX cutting head This WSX laser cutting head can quickly change the focusing lens of different focal lengths and adapt to various fiber lasers. It is very smart, safe, and reliable.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
