Metal Circular Saw Machine Suppliers and Manufacturers

Hydraulic metal cutting machine: adopt hydraulic pump as feeding power and feed via vertical track. Compared to pneumatic cutting machine, its feeding strength is heavier and its cutting is flatter and more stable. Adopt low speed cutting for saw blade rotation. It is suitable for saw cutting thick steel and stainless pipes, bars and other irregular materials and so on. High cutting precision, smooth cutting surface, burr-free and high efficiency. 1.Vertical track feeding and retracting: stable feeding, long tooling life and high cutting precision. 2.European design, multi group gears driving and be suitable for heavy cutting and stable precision. 3.Cooling cycle system (water soluble cutting liquid) makes work-piece cutting surface smooth and accurate, burr-free and prolongs using life of the saw blade. Be suitable for long-time and large amount of cutting.90°direct cutting, 90°-45° left and right bias cutting available. Model ï¼?ZG-375SAï¼? Sawing angle 90° 45° Cutting capacityï¼?mmï¼? 120 100 120Ã?120 105Ã?105 150Ã?60 110Ã?60 70 60 65Ã?65 55Ã?55 Machine motor 3HP Spindle speed 58/29R.P.M Cooling water pump 1/8HP Saw blade HSS OD Ï?275ã??Ï?400Ã?Shaft Ï?32ï¼?Pin hole2Ã?Ï?11Ã?63mm The use of hydraulic pressure 25-35kg/cm² Machine dimension Approximately 620kgs NW/GWï¼?LÃ?WÃ?Hï¼? 1610Ã?780Ã?2130mm

Cocoa beans, coffee beans, rice, sugar olive oil, metal scrap, a4 paper, pink salt, chemicals, and medical equipment.End to end trading

Aluminum and copper lugs frozen pork meat, frozen fish, wood pellets, wood shavings, epal pallets, european wooden pallets, hard wood charcoal, firewood, skipjack tuna fish, toilet tissue, milka chocolate biscuit, copper scrap, hms scrap, nutella chocolate, pork feet, urea fertilizer, icumsa 45 sugar, nido milk powder, full cream milk powder, skimmed milk powder, wheat flour, refined sunflower oil, palm oil cp8, toasted sesame oil, refined sesame oil, 1121 basmati rice, almond nuts, aptamil baby milk, bananas, bebelac infant milk, redbull energy drinks, xl energy drinks, coca cola, fanta, pepsi, sprite, colgate toothpaste, pampers diapers, dove bar soap, dove spray, ferrero chocolate, fresh eggs, kinder joy, pistachio nuts, walnuts, mozzarella cheese, toblerone, nutrilon milk, pig premix, ldpe scrap, hdpe scrap, paraffin wax.

Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type aluminum extrusion and precision cutting of different profile. 1ã?? high precision sawing, no burr, no need for secondary processing, high efficiency. 2ã?? only foot switch, automatic mechanical pressure and sawing. Safe and easy. Pressure parts using high quality rubber strip, not easy to damage the surface of the workpiece. 3ã?? hidden saw blade sawing from the bottom up, high safety, single or multiple materials sawing at the same time, small vibration, low noise. 4ã?? the pressure system is driven by two-way linear bearing and controlled by an independent air pressure cylinder, with high pressure stability (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5ã?? press height and speed and saw cutting height and speed can be set according to material size and thickness. 6ã?? the spindle runs at high speed, and equipped with automatic oil injection device, to provide the saw blade with proper lubrication, make the workpiece surface smoother without burr, extend the service life of the saw blade 7ã?? additional Angle template can be cut Angle. Model ZG-455SAL specifications Sawing angle 90°&45° Maximum sawing width 300mm Maximum sawing height 140mm Saw blade 3200R.P.M Blade size Tungsten steel blade with blade tip Ï?355-455Ã?Ï?25.4mm Size of Table 650Ã?670Ã?860mm Machine motor 5HP/2P three-phase Pressure required 5-6kg/cm2 Machine dimension ( LxWxH ) 1030Ã?860Ã?1360mm Packing dimension ( LxWxH ) 1050Ã?880Ã?1380mm NW/GW 335/385kg

We provide the most competitive saw blade for metalworking. Price and quality is always our principle. There have six types for various materials, ex: carbon, aluminum, iron, pipe!k etc. It!|s competitive that provide another choice to your customer. We believe that you will be satisfied with samurai saw blade. We provide circular saw blade range from diameter 250 mm-520 mm. It's suitable for cutting carbon steel, iron pipe, copper, aluminum, stainless and so on

The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs

Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles. 1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency. 2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy. 3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available. 4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing). 5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness. 6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade. 7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate. Model ZG-510SA Sawing angle +45° ~ 0°~ -45° Blade size 20"x1" Inner hole Saw blade 3000R.P.M. Machine motor 5 HP Pressure required 4-6kg/cm² Size of Table 920x650mm Table height 900mm NW/GW 570 / 640kgs Machine dimension ( LxWxH ) 1200x1090x1780mm Packing dimension ( LxWxH ) 1320x1210x1980mm

Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services

Wood pellet, seafood and scrap.

Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions..Shipping and transsportation

Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).

Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type aluminum extrusion and precision cutting of different profile. 1 high precision sawing, no burr, no need for secondary processing, high efficiency. 2 only foot switch, automatic mechanical pressure and sawing. Safe and easy. Pressure parts using high quality rubber strip, not easy to damage the surface of the workpiece. 3 hidden saw blade sawing from the bottom up, high safety, single or multiple materials sawing at the same time, small vibration, low noise. 4 the pressure system is driven by two-way linear bearing and controlled by an independent air pressure cylinder, with high pressure stability (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5 press height and speed and saw cutting height and speed can be set according to material size and thickness. 6 the spindle runs at high speed, and equipped with automatic oil injection device, to provide the saw blade with proper lubrication, make the workpiece surface smoother without burr, extend the service life of the saw blade 7 additional Angle template can be cut Angle. Model ZG-455SAL specifications Sawing angle 90°&45° Maximum sawing width 300mm Maximum sawing height 140mm Saw blade 3200R.P.M Blade size Tungsten steel blade with blade tip Ï?355-455Ã?Ï?25.4mm Size of Table 650Ã?670Ã?860mm Machine motor 5HP/2P three-phase Pressure required 5-6kg/cm2 Machine dimension ( LxWxH ) 1030Ã?860Ã?1360mm Packing dimension ( LxWxH ) 1050Ã?880Ã?1380mm NW/GW 335/385kg

Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk aluminum shell, MP3 shell, aluminum doors and Windows, picture frames, light boxes, screen, display equipment, line type lamp, aluminum furniture, aluminum extrusion and precision cutting of different profile 1 accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency. 2 only foot switch, automatic mechanical pressure, automatic saw material is safe and easy 3 hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time 4 the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5 press height and speed and saw cutting height and speed can be set according to material size and thickness. 6 precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life 7 can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate Model ZG-410SA Sawing angle +45° ~ 0°~ -45° Blade size 16"x1" Inner hole Saw blade 3200R.P.M. Machine motor 3 HP Pressure required 4-6kg/cm2 Size of Table 800x400mm Table height 850mm NW/GW 500 /530kgs Machine dimension ( LxWxH ) 1100x1000x1600mm Packing dimension ( LxWxH ) 1200x1100x180mm

Decoration, giftware, toys & games, garments like shirts, t shirts, polo, pant and trouser, underwear and sportswear, household like kitchenware, stationery & foodstuffs, mineral items, iron ore, metal scrap, petroleum items, chemical items, agricultural products like rice, edible oils like sunflower oil, animal feeds, paper products, wood pellets & wood chips.Buying agents, importing, exporting

The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs

The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs

Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile. 1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency. 2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy 3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time 4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5. press height and speed and saw cutting height and speed can be set according to material size and thickness. 6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life 7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate. Model ZG-610SA Sawing angle +45° ~ 0°~ -45° Blade size 24"x1" Inner hole Saw blade 2000R.P.M. Machine motor 7.5 HP Pressure required 4-6kg/cm² Size of Table 1130x800mm Table height 1030mm NW/GW 790 / 870kgs Machine dimension ( LxWxH ) 1330x1200x2000mm Packing dimension ( LxWxH ) 1450x1320x2180mm