1. Application in the field of air purification: it is used for air purifier, as a sub-high-efficiency and high-efficiency air filter element, and as a coarse and medium-efficiency air filter with large flow rate. It has the advantages of small resistance, large strength, excellent acid and alkali resistance, corrosion resistance, stable efficiency, long service life and low price. There is no short fleece phenomenon in the purified gas. 2. Application in the field of medical and health care: made of melt-blown cloth dust mouth breathing resistance is small, not short, dust control efficiency is as high as 99%, widely used in hospitals, food processing, mining and other workplace to dust, prevent bacteria with anti-inflammatory analgesic membrane made of product after special treatment, permeability is good, non-toxic side effects, easy to use, and spun-bonded fabric of SMS composite products are widely used in the production of sanitary products such as surgical clothes. 3. Liquid filtration materials and battery diaphragm: polypropylene melt-blown filter cloth used in acidic and alkaline liquid, oil, oil has very excellent performance, such as the battery industry at home and abroad has been regarded as a good membrane material, and has been widely used, not only reduces the cost of battery, simplifies the process, and greatly reduce the weight and volume of the battery. 5. Thermal materials: the average diameter of fusion-sprayed ultrafine fiber is between 0.5 ~ 5m, the specific surface area is large, and a large number of fine pores are formed in the cloth with high porosity. There is a large amount of air stored in this structure, which can effectively prevent heat loss and has excellent thermal insulation. It is widely used in the production of clothing and various thermal insulation materials. Such as leather jacket, ski shirt, cold clothing, cotton village cloth, with light, warm, moisture absorption, good permeability, no mildew and other advantages.
w 2. Application in the field of medical and health care: made of melt-blown cloth dust mouth breathing resistance is small, not short, dust control efficiency is as high as 99%, widely used in hospitals, food processing, mining and other workplace to dust, prevent bacteria with anti-inflammatory analgesic membrane made of product after special treatment, permeability is good, non-toxic side effects, easy to use, and spun-bonded fabric of SMS composite products are widely used in the production of sanitary products such as surgical clothes. 3. Liquid filtration materials and battery diaphragm: polypropylene melt-blown filter cloth used in acidic and alkaline liquid, oil, oil has very excellent performance, such as the battery industry at home and abroad has been regarded as a good membrane material, and has been widely used, not only reduces the cost of battery, simplifies the process, and greatly reduce the weight and volume of the battery. 4. Oil absorbent materials and industrial wipes: polypropylene melt spraying cloth made of various oil absorbent materials, oil absorption up to the weight of 14-15 times, widely used in environmental engineering, oil-water separation engineering, in addition, in industrial production, can be used as oil and dust clean materials. These applications give full play to the characteristics of polypropylene and the adsorbability of the ultrafine fiber produced by melting and spraying. 5. Thermal materials: the average diameter of fusion-sprayed ultrafine fiber is between 0.5 ~ 5m, the specific surface area is large, and a large number of fine pores are formed in the cloth with high porosity. There is a large amount of air stored in this structure, which can effectively prevent heat loss and has excellent thermal insulation. It is widely used in the production of clothing and various thermal insulation materials. Such as leather jacket, ski shirt, cold clothing, cotton village cloth, with light, warm, moisture absorption, good permeability, no mildew and other advantages.
1. Application in the field of air purification: it is used for air purifier, as a sub-high-efficiency and high-efficiency air filter element, and as a coarse and medium-efficiency air filter with large flow rate. It has the advantages of small resistance, large strength, excellent acid and alkali resistance, corrosion resistance, stable efficiency, long service life and low price. There is no short fleece phenomenon in the purified gas. 3. Liquid filtration materials and battery diaphragm: polypropylene melt-blown filter cloth used in acidic and alkaline liquid, oil, oil has very excellent performance, such as the battery industry at home and abroad has been regarded as a good membrane material, and has been widely used, not only reduces the cost of battery, simplifies the process, and greatly reduce the weight and volume of the battery. 4. Oil absorbent materials and industrial wipes: polypropylene melt spraying cloth made of various oil absorbent materials, oil absorption up to the weight of 14-15 times, widely used in environmental engineering, oil-water separation engineering, in addition, in industrial production, can be used as oil and dust clean materials. These applications give full play to the characteristics of polypropylene and the adsorbability of the ultrafine fiber produced by melting and spraying. 5. Thermal materials: the average diameter of fusion-sprayed ultrafine fiber is between 0.5 ~ 5m, the specific surface area is large, and a large number of fine pores are formed in the cloth with high porosity. There is a large amount of air stored in this structure, which can effectively prevent heat loss and has excellent thermal insulation. It is widely used in the production of clothing and various thermal insulation materials. Such as leather jacket, ski shirt, cold clothing, cotton village cloth, with light, warm, moisture absorption, good permeability, no mildew and other advantages.
3. Liquid filtration materials and battery diaphragm: polypropylene melt-blown filter cloth used in acidic and alkaline liquid, oil, oil has very excellent performance, such as the battery industry at home and abroad has been regarded as a good membrane material, and has been widely used, not only reduces the cost of battery, simplifies the process, and greatly reduce the weight and volume of the battery. 4. Oil absorbent materials and industrial wipes: polypropylene melt spraying cloth made of various oil absorbent materials, oil absorption up to the weight of 14-15 times, widely used in environmental engineering, oil-water separation engineering, in addition, in industrial production, can be used as oil and dust clean materials. These applications give full play to the characteristics of polypropylene and the adsorbability of the ultrafine fiber produced by melting and spraying. 5. Thermal materials: the average diameter of fusion-sprayed ultrafine fiber is between 0.5 ~ 5m, the specific surface area is large, and a large number of fine pores are formed in the cloth with high porosity. There is a large amount of air stored in this structure, which can effectively prevent heat loss and has excellent thermal insulation. It is widely used in the production of clothing and various thermal insulation materials. Such as leather jacket, ski shirt, cold clothing, cotton village cloth, with light, warm, moisture absorption, good permeability, no mildew and other advantages.
1. Application in the field of air purification: it is used for air purifier, as a sub-high-efficiency and high-efficiency air filter element, and as a coarse and medium-efficiency air filter with large flow rate. It has the advantages of small resistance, large strength, excellent acid and alkali resistance, corrosion resistance, stable efficiency, long service life and low price. There is no short fleece phenomenon in the purified gas. 2. Application in the field of medical and health care: made of melt-blown cloth dust mouth breathing resistance is small, not short, dust control efficiency is as high as 99%, widely used in hospitals, food processing, mining and other workplace to dust, prevent bacteria with anti-inflammatory analgesic membrane made of product after special treatment, permeability is good, non-toxic side effects, easy to use, and spun-bonded fabric of SMS composite products are widely used in the production of sanitary products such as surgical clothes. 4. Oil absorbent materials and industrial wipes: polypropylene melt spraying cloth made of various oil absorbent materials, oil absorption up to the weight of 14-15 times, widely used in environmental engineering, oil-water separation engineering, in addition, in industrial production, can be used as oil and dust clean materials. These applications give full play to the characteristics of polypropylene and the adsorbability of the ultrafine fiber produced by melting and spraying. 5. Thermal materials: the average diameter of fusion-sprayed ultrafine fiber is between 0.5 ~ 5m, the specific surface area is large, and a large number of fine pores are formed in the cloth with high porosity. There is a large amount of air stored in this structure, which can effectively prevent heat loss and has excellent thermal insulation. It is widely used in the production of clothing and various thermal insulation materials. Such as leather jacket, ski shirt, cold clothing, cotton village cloth, with light, warm, moisture absorption, good permeability, no mildew and other advantages.
w 1. Application in the field of air purification: it is used for air purifier, as a sub-high-efficiency and high-efficiency air filter element, and as a coarse and medium-efficiency air filter with large flow rate. It has the advantages of small resistance, large strength, excellent acid and alkali resistance, corrosion resistance, stable efficiency, long service life and low price. There is no short fleece phenomenon in the purified gas. 3. Liquid filtration materials and battery diaphragm: polypropylene melt-blown filter cloth used in acidic and alkaline liquid, oil, oil has very excellent performance, such as the battery industry at home and abroad has been regarded as a good membrane material, and has been widely used, not only reduces the cost of battery, simplifies the process, and greatly reduce the weight and volume of the battery. 4. Oil absorbent materials and industrial wipes: polypropylene melt spraying cloth made of various oil absorbent materials, oil absorption up to the weight of 14-15 times, widely used in environmental engineering, oil-water separation engineering, in addition, in industrial production, can be used as oil and dust clean materials. These applications give full play to the characteristics of polypropylene and the adsorbability of the ultrafine fiber produced by melting and spraying.
1. Application in the field of air purification: it is used for air purifier, as a sub-high-efficiency and high-efficiency air filter element, and as a coarse and medium-efficiency air filter with large flow rate. It has the advantages of small resistance, large strength, excellent acid and alkali resistance, corrosion resistance, stable efficiency, long service life and low price. There is no short fleece phenomenon in the purified gas. 2. Application in the field of medical and health care: made of melt-blown cloth dust mouth breathing resistance is small, not short, dust control efficiency is as high as 99%, widely used in hospitals, food processing, mining and other workplace to dust, prevent bacteria with anti-inflammatory analgesic membrane made of product after special treatment, permeability is good, non-toxic side effects, easy to use, and spun-bonded fabric of SMS composite products are widely used in the production of sanitary products such as surgical clothes. 5. Thermal materials: the average diameter of fusion-sprayed ultrafine fiber is between 0.5 ~ 5m, the specific surface area is large, and a large number of fine pores are formed in the cloth with high porosity. There is a large amount of air stored in this structure, which can effectively prevent heat loss and has excellent thermal insulation. It is widely used in the production of clothing and various thermal insulation materials. Such as leather jacket, ski shirt, cold clothing, cotton village cloth, with light, warm, moisture absorption, good permeability, no mildew and other advantages.
About Meltblown Nonwove Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven â?¢ Melt blown is a one step process to make fabrics from polymer. â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid. â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: â?¢ Adjustable Pores And Capillary Structure â?¢ Excellent barrier properties â?¢ Filament size 1 -3 �µm â?¢ High Elasticity â?¢ High Filtration capability â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). â?¢ Large Area-to-weight ratio â?¢ Self-bonding â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. â?¢ Very good thermal insulation for apparel application â?¢ Weak tensile properties â?¢ Wicking Properties Application of spun-bond nonwoven fabrics: â?¢ Sanitary and Hygiene: â?¢ Sanitary napkins, â?¢ Baby diapers and â?¢ Incontinence diapers â?¢ Medical and Surgical: â?¢ Gowns, â?¢ Face masks, â?¢ Caps, â?¢ Drapes, etc â?¢ Other Miscellaneous Applications: â?¢ Filtration Material, â?¢ Agriculture, â?¢ Oilsorbents â?¢ Hot-melt adhesives â?¢ Headliners, etc
MATERIAL : PP Blue Non-Woven High Melt CATEGORY :PP TYPE :Non-wowen GRADE :Blue SPECIFICATION :PP blue non-wovan, high melt Pure PP, no any contamination 18 tons per load 15 loads ready Origin in USA ORIGIN : US LOADING WEIGHT : 18 Tons CNF (USD/Ton) : $480-680
Non Woven Free Size Disposable Shoe It Keeps Both Contamination From Shoes And Contaminated Shoes From Spreading The Disease. Put On Your Shoe Covers, Make Sure That All Areas Of The Foot And Shoe Are Covered. Try Not To Touch The Floor Or Other Areas With Your Hands While Putting The Shoes Covers On
Product Tech SMS Medical Nonwoven Fabric Composition 100% PP Weight Range 10gsm-100gsm Workable Width Between 100 and 3,100mm Roll Diameter Between 800 and 1,500 mm Core Dia 76 mm Color Option White Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital Feature 1. Low-linting 2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind 3. Excellent wet and dry strength 4. Highly absorbent and quick drying 5. Hygienic - Cleans without scattering dust particles 6. Solvent-resistant 7. No binders,chemicals or adhesives 8. Both sides of the non-woven fabric sheet can be used Packaging Shrink PE Film and Cardboard on Both Side. 40HQ can load around 8.5 ton, 20GP can load around 3.5 ton Certifications ISO9001:2000, GMPC, SGS Production Lead 20-40 days after receiving the deposit and confirming the samples Payment Terms 30%T/T Deposit, Balance Against B/L Copy OEM Service Yes
Product Tech SMS Medical Nonwoven Fabric Composition 100% PP Weight Range 10gsm-100gsm Workable Width Between 100 and 3,100mm Roll Diameter Between 800 and 1,500 mm Core Dia 76 mm Color Option White Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital Feature 1. Low-linting 2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind 3. Excellent wet and dry strength 4. Highly absorbent and quick drying 5. Hygienic - Cleans without scattering dust particles 6. Solvent-resistant 7. No binders,chemicals or adhesives 8. Both sides of the non-woven fabric sheet can be used Packaging Shrink PE Film and Cardboard on Both Side. 40HQ can load around 8.5 ton, 20GP can load around 3.5 ton Certifications ISO9001:2000, GMPC, SGS Production Lead 20-40 days after receiving the deposit and confirming the samples Payment Terms 30%T/T Deposit, Balance Against B/L Copy OEM Service Yes
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m. Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields. Raw Material 100% Polypropylene Color White, Black Width 10-160cm Weight 9-300gsm Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc. MOQ 3,000 KGS per item Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples Payment Terms T/T, L/C, D/P, etc. Characteristics Customized as the application and requirements, some characteristics as follow: 1. High strength, small difference at longitudinal and longitudinal direction; 2. Acid, non-toxic, non-tradiation, harmless to human physiology; 3. With excellent breathability; 4. Master batch dying, never fade; 5. Smooth, bright color, roll slitting, easy use, best quality.
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
Non Woven Face Mask
Product Tech SMS Medical Nonwoven Fabric Composition 100% PP Weight Range 10gsm-100gsm Workable Width Between 100 and 3,100mm Roll Diameter Between 800 and 1,500 mm Core Dia 76 mm Color Option White Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital Feature 1. Low-linting 2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind 3. Excellent wet and dry strength 4. Highly absorbent and quick drying 5. Hygienic - Cleans without scattering dust particles 6. Solvent-resistant 7. No binders,chemicals or adhesives 8. Both sides of the non-woven fabric sheet can be used Packaging Shrink PE Film and Cardboard on Both Side. 40HQ can load around 8.5 ton, 20GP can load around 3.5 ton Certifications ISO9001:2000, GMPC, SGS Production Lead 20-40 days after receiving the deposit and confirming the samples Payment Terms 30%T/T Deposit, Balance Against B/L Copy OEM Service Yes
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m. Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields. Raw Material 100% Polypropylene Color White, Black Width 10-160cm Weight 9-300gsm Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc. MOQ 3,000 KGS per item Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples Payment Terms T/T, L/C, D/P, etc. Characteristics Customized as the application and requirements, some characteristics as follow: 1. High strength, small difference at longitudinal and longitudinal direction; 2. Acid, non-toxic, non-tradiation, harmless to human physiology; 3. With excellent breathability; 4. Master batch dying, never fade; 5. Smooth, bright color, roll slitting, easy use, best quality.
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1 m, generally 1~3m. Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields. Raw Material 100% Polypropylene Color White, Black Width 10-160cm Weight 9-300gsm Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc. MOQ 3,000 KGS per item Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples Payment Terms T/T, L/C, D/P, etc. Characteristics Customized as the application and requirements, some characteristics as follow: 1. High strength, small difference at longitudinal and longitudinal direction; 2. Acid, non-toxic, non-tradiation, harmless to human physiology; 3. With excellent breathability; 4. Master batch dying, never fade; 5. Smooth, bright color, roll slitting, easy use, best quality.
