Uses SM-P is recommended strongly for use in all ready-mix, precast, and prestress concrete applications where low water-cement ratio, low permeability, high durability, high strength concrete is specified or high slump flowable concrete is required. SM-P can be applied in various concrete, including high strength concrete, high fluidity concrete, high duration concrete, aluminate cement refractory concrete, grouting material, steam curing concrete, high strength mortar, gypsum products, and so on. Advantages Increase concrete early strength. Promote workability. Increase flowability. Increase cohesiveness and segregation resistance. Shorten mold take-off time. Keep water/cement to a minimum. Promote air stability. Compatible with cements, gypsums and other admixtures. Reduce bleeding at high slumps. Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg It is easy to absorb moisture from air. So it must be kept in original sealed bag and stored at dry condition. The shelf life is one year. This product is non-toxic and non-flammable. So there is no special transportation requirement.
Product Description ZHUOJUN ZJ-401 is sulphonated melamine formaldehyde based superplasticizer. It exhibits low air entrainment, good whiteness, no corrosion to iron and excellent adaptability to all kinds of cement or gypsum. It obviously improves their strength, fluidity and anti-permeability. It has good workability, water retention and steam-curing adaptability. ZHUOJUN ZJ-401 is in line with the standard GB8076-2008 for the concrete admixtures. ZHUOJUN ZJ-401 is widely applied in construction, such as high strength gypsum, gypsum based self-leveling floor, gypsum plaster, gypsum putty, cement based self-leveling floor, wear-resistance floor, repair mortar, special high-strength mortar, as-cast finish concrete/bare concrete, early strength concrete, high-endurance concrete etc.. Typical Applications - high strength gypsum - gypsum based self-leveling floor - gypsum plaster, gypsum putty - cement based self-leveling floor - wear-resistance floor, repair mortar - special high-strength mortar - as-cast finish concrete/bare concrete - early strength concrete - high-endurance concrete Features - High range of water reduction efficiency - Low air entrainment - Excellent adaptability to all kinds of cement or gypsum - High strength, powder fluidity and anti-permeability - Good workability, water retention and steam-curing adaptability Technical Data for ZJ-401 Model No. ZJ-401 Appearance white powder Density (kg/m³) 400-700 Weight Loss on Drying (% after 30min. at 105) 5% pH Value (20% aqueous solution at 20) 7.0-9.0 SO²¯ Ion Content (%) 3-4% CI- Ion Content (%) 0.05% Air Content of Concrete Test (%) 3% Water Reduction Rate in Concrete Test (%) 14% Recommended Dosage (% of cementitious materials by weight) cement-based: 0.3%-1.0% gypsum-based: 0.2%-0.5% Packaging C.Standard packed in 25 KG per paper plastic composite bag D.Big bags or other special packages are possible on request Storage Stored in its original packaging in a dry and place. Warranty It is recommended to use ZHUOJUN ZJ-401 within 12 months. If not caked under prolonged storage, they can still be usable. Notes Please be careful not to touch your eyes or skin when using ZHUOJUN ZJ-401. It is recommended to use protective gloves and glasses. If you accidentally get it, please wash it with plenty of water.
Melamine is an organic Chemical industry semifinished product with even structure and vast applications.It is mainly used as the material to produce melamine formaldehyde(MF)colophony
Melamine is an organic compound that is often combined with formaldehyde to produce melamine resin, a synthetic polymer that is fire resistant and heat tolerant. Resin is a versatile material that has a highly stable structure. Melamine can be easily molded while warm but will set into a fixed form, which makes it suitable for certain industrial applications. This compound is considered safe for its normal uses, but food products that are contaminated with it can be unsafe for consumption. Application: Melamine is mainly used for high-pressure decorative laminates such as Formica, melamine dinnerware, kitchen worktops, furniture, laminate flooring, adhesives for board materials such as particle board (chipboard), MDF (medium-density fibreboard) and plywood, oriented strand board (OSB) and laminated veneer timber (LVT). Packing: 25kg bags, 50kg bags, 1000kg jumbo bags. Item Specification Appearance: Fine, white crystalline powder Melamine, % by weight: 99.8 min Ash, % by weight: 0.01 max Moisture, % by weight: 0.1 max Screen analysis % on 40 mesh % thru 325 mesh: 1.0 max 35.0 max Color, APHA: 15 max
MDF Board ***** Flatt and Smooth surfaces by well sanded *****or MDF Melamine faced ***** Core made from Mix hardwood Fiber *** High Density vary from 720kg - 820kg /m3 depend on thickness *** All sizes available by demand *** usage : Housing components - Furniture components - Carving purposes **** MOQ 40 m3 in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** or 50% Deposit and 50% Balance after received container in buyer ware house and checking quality ***** No L/C accepted due to high Banking fee & Complicated procedures
Melamine MDF
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Indonesia MELAMINE faced products for MDF - CHIPBOARD & PLYWOOD ***** Vary size available ****** Melamine faced with vary colors ****** Please contact us for further details , only serious buyers expected ***** Payment term = NO L/C accepted , only by Bank remittance
Indonesia Origin MDF Manufacturer and Exporter ***** MDF Board Thickness from 2mm t0 25mm x 1220mm x 2440mm 0r 1830mmx3660mm ***** Flatt and Smooth surfaces by well sanded ***** made from Mix hardwood Fiber *** High Density vary from 720kg - 820kg /m3 depend on thickness *** All sizes available by demand *** also available Melamine face MDF ***** usage : Housing components - Furniture components - Carving purposes **** MOQ 48 cbm in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** No L/C accepted due to high Banking fee & Complicated procedures
Glue: E1,E0 and Melamine Core: Hardwood,Poplar and Combic Size:1220x2440mm Thickness:2-24mm
Hardwood and softwood logs usa and canada souther yellow pine logs, eastern white pine logs walnut logs, red oak logs, cherry logs, african teak logs & various other specie lumber sd and kd, syp lumber , ewp lumber lumber : ashwood ,redoak, white oak ,walnut sawn timber hardwood : red merantiwood malaysia european hardwood, beechwood,ashwood,red oak ,white oak , whitewood : ad ast, kd ,kd s4s white wood and wood pallets austrian whitewood, bosnian whitewood, romanian whitewood, usa pine wood brazil whitewood plywood :china ,malaysia,indonesia ,vietnam commercial plywood, veneer plywood ,melamine plywood, hpl plywood mdf: china ,thailand ,malaysia plain mdf ,melamine mdf , veneer mdf , high glossy mdf , film faced plywood (marine plywood): china,india,vietnam shuttering plywood solid chipboard, particular board and osb board doors and frames.
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
We supply (Garjun) Keruing plywood with 100% core (Garjun)Keriung, face and back (Garjun)Keriung 1220*2440 in thickness 6mm,9mm,12mm,15mm,18mm... Grade: AA/AA Both sides SANDED. Glue: Melamine and MR
We supply: 1. Okume face and Okume back ,hardwood, Combi core MR-AA Grade Face,AA Grade Back in thickness 9mm,12mm,18mm 2.Okume Face and Canarium Back, hardwood combi core MR- A Grade Face , A Grade Back in thickness 9mm,12mm,18mm 3.Okume Face and Okume Back, Eucalyptus core MR+15% Melamine- AA Grade Face , AA Grade Back in thickness 9mm,12mm,18mm 4. Okume Face and Canarium Back, Eucalyptus core MR+15% Melamine - A Grade Face , BGrade Back in thickness 9mm,12mm,18mm We also can do plywood as per customer requirement.
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
LED light.
1> Feature : Adjustable 2> 90° wall mount hinge , 180° glass to glass 3> Glass thickness : 8 mm~12 mm 4> Max door weight : 36 kg (with 2 hinges) 5> Material : Solid Brass 6> Some models do have auto self-closing function within 25° at both sides 7> Mickey Mouse ear design.
1> Shower Glass Clip 2> Glass thickness : 6mm / 8mm / 10mm / 12mm 3> Material : Solid Brass Keywords: Shower Shelf Clips, Glass Clips.
1. Hand Rail Bracket 2. SS304, SS316 3. Satin Finish, Mirror Polished 4. Two caps plates with Nylon spacer-Diameter of the cap plates in 38mm,including one curve plate(suitable for 50.8mm) and one flat plate, with suitable counter sunk screws.
