Bio Medical Waste Incinerator and Unwanted materials generated by human activities from Residential, Commercial and Industrial areas in Towns and Metro Cities
Main features: It has been assessed and registered as meeting the requirements of ISO9001 and 14000. With Italian fuel injection system Automatically control system, digital display Time set, automatically incinerate and ignite Vacuum burning, fuel is diesel fuel Can meet the requirements of the national environmental protection standard. Low failure rate, low maintenance and running cost Technical parameter: Model Capacity Fuel Sampling Methods Power Power Supply JK-MI-10 10Kg/H Diesel fuel Automatically 700W 220V/50HZ JK-MI-20 20Kg/H Diesel fuel Automatically 900W 220V/50HZ JK-MI-30 30Kg/H Diesel fuel Automatically 1100W 220V/50HZ JK-MI-50 50Kg/H Diesel fuel Automatically 1800W 220V/50HZ.
Medical Incinerator Product Description: It is suitable for the health sector, farm, blood station, epidemic prevention station, surgical waste in hospital and viral material. Types of medical waste incinerated: disposable syringe, infusion set, cotton yarn, some materials used in the operating room , stump, rubber gloves, dumped protective clothing and sickbed supplies which are infectious and hazardous Main features: It has been assessed and registered as meeting the requirements of ISO9001 and 14000. With Italian fuel injection system Automatically control system, digital display With the founction of time set, automatically incinerate and igniteï¼?Negative pressure burningï¼?Use the diesel for fuel. Can meet the requirements of the national environmental protection standard. Low failure rate, low maintenance and operating cost Safety device: Burner safety device: fuel supplies can be automatically cuted off ï¼?when the burner ignition device is unnormal Technical parameter: Model Capacity Fuel Ignition Mode Power Power Supply JK-MI-10 10Kg/H Diesel fuel Automatically 700W 220V/50HZ JK-MI-20 20Kg/H Diesel fuel Automatically 900W 220V/50HZ JK-MI-30 30Kg/H Diesel fuel Automatically 1100W 220V/50HZ JK-MI-50 50Kg/H Diesel fuel Automatically 1800W 220V/50HZ Basic Configuration: Furnace: 1 set (steel furnace, refractories, insulation materials) Dust collector: 1 set Exhaust pipe: 1 set Oil Pump: 1 unit Fan: 1 set Safety equipment: 1 set (including the burner safety devices, lightning protection safety devices, etc.) Italian importing fuel injection system: 1 set Carbon steel storage tank: 1 unit Carbon steel chimney: 1 set Carbon steel flue: 1 set Automatically control system: 1 set
Bio Medical waste disposable incinerator including Covid-19 Wastes
Medical waste incinerator Fire print domestic waste incinerator. No fuel is required for the combustion process. Carbonized combustion does not require electricity. We separate the oxygen-rich gas from the air Help domestic garbage decompose at low temperature. Household waste incinerators do not produce flames, The chimney emits transparent gas without odor. Fire print brand waste incinerator, There is no dust in the chimney. A small amount of steam is discharged from the pipe. After cooling down, Tar recovery, Disinfection and deodorization, 2500W/220v power supply is needed to eliminate the smell of steam. Feeding mechanism power 2.2KW/380V The incinerator has a volume of 5 cubic meters of garbage, The incinerator feeds 1.8-1.0 cubes of waste at a time. Enter household garbage 3 to 4 times a day. Fire print garbage incinerator fill it with garbage. Environmentally friendly incinerator low temperature 50 to 380 â??. Need a pool of 3-5 cubic meters, Cycle cooling. The burning capacity is between 800 and 1600 kg. Output steam: wood vinegar. Output ash: ceramic ash with negative ions. Excellent reduction: 1/200 or 1/500. Fire print brand Delivery from the factory: 93000USD/piece, Need 380V/50HZ The overall container size of the equipment: length 1500cm, width 270cm, height 280cm. Green incinerator, integral container with shell, easy hoisting.
Main Features: 1. The gasifying incineration way is utilized and the rubbished produced each day is able to handle the one-off incineration treatment. 2. The gasifying incineration, mixed incineration, burn-out treatment and other technologies are used to make the content of the smog exhaust and dust lower than the discharge standard regulated by the nation. 3. Fully seal operation is adopted to be applied to dealing with the infectious medical waste and avoid the secondary pollution. 4. Small volume and site area. 5. The series of incinerator are divided into the fuel and gas kind which can be selected according to the different needs of the users. Main Technical parameters: Model item LDF-20 LDF-30 LDF-50 LDF-100 LDF-150 LDF-300 LDF-500 Burning Capacity 10-20KG/time 3-6 times per day 20-30kg/time (3-6 times per day) 30-50kg/ time (3-6 times per day) 50-100kg/time (3-6 times per day) 100-150kg/ time (3-6 times per day) 200-300kg/ time (3-6 times per day) 300-400kg/ time (3-6 times per day) Size of the Burner (m)(L*H*B) 1.6*1.2*1.7m 1.45*0.9*1.75 1.8*1.15*3 1.8m*1.4m*3.4m 2*1.4*3.5 2.2*1.4*3.8 3*2*4.8 Size of the filling entrance (mm) 380*480 480*600 620*800 520*720 760*960 900*1100 1080*1280 Chimney(mm) Ã?280(OD) Ã?280(OD) Ã?280(OD) Ã?300(OD) Ã?300(OD) Ã?400(OD) Ã?460(OD) Air-blower 0.25kw 0.37kw 0.37kw 0.5kw 0.5kw 1.1kw 1.1kw 0.55kw Auxiliary machine Power 0.11kw oil consumption 4-6kg/h Power 0.11kw Oil consumption 4-6kg/h Power 0.11kw Oil consumption 4-10kg/h Power 0.11kw Oil consumption 4-10kg/h Power 0.11kw Oil consumption 4-10kg/h Power 0.22kw Oil consumption 7-14kg/h Power 0.22kw Oil consumption 7-14kg/h Incinerator structure: Vertical type furnace body (including feeding door, ash door),first burning chamber, secondary combustion chamber, flue gas purification chamber, secondary combustion chamber, fan, independent chimney, fuel transfer system, blower and air supply system, control system of emergency discharge flue, etc.
Average capacity: 15Kgs per hour. Double combustion chamber. Diesel Oil/Natural Gas fuel. Original Italy Burner. We are supplier of medical equipment, hospital furniture and disposable products, including shadowless lamp, operation lamp, dental chair, medical trolley, sickbed, etc. We delivery our products under FOB/CIF/C&F term, by sea/air and have experience at by Train to Middle Asia and Russia, etc.
Medical Gloves
Medical Gloves
1. Good air permeability SMS non-woven fabric, one-way ventilation, efficient antibacterial, can quickly volatilize the internal heat. 2. Block small particles It can block fine particles, dust, etc. and avoid physical contact. 3. Effective isolation It can effectively block the penetration of liquid and bacteria, filter volatile gas and avoid direct contact.
1. Good air permeability SMS non-woven fabric, one-way ventilation, efficient antibacterial, can quickly volatilize the internal heat. 2. Block small particles It can block fine particles, dust, etc. and avoid physical contact. 3. Effective isolation It can effectively block the penetration of liquid and bacteria, filter volatile gas and avoid direct contact.
Catheter Kit, Dylasis And All Medical Equipments
Size=14.5X9.5cm 3ply.elastic STANDARD : FDA & CE/FFP2 FOB XIAMEN Price USD : 0.17 (KG/PCS)/ CARTON : 8/2000
Size=17.5x9.5cm 3ply.elastic ear loop Standard : FDA & CE/FFP2 FOB XIAMEN Price USD : 0.17 (KG/PCS)/ CARTON : 8/2000
Medical Face Mask
Medical Protective Mask
DESCRIPTION : 3 Ply MEDICAL disposable mask EN:14683:2019+AC:2019 Material: Outside layer 25g blue non-woven Middle layer-25g melt blow filter 99% Inside 25g white non-woven Size: 17.5*9.5cm Color:Blue and white, Certification:CE and FDA Model No : 3Ply MEDICAL . Quantity Pcs ; 10 Packing details : 50pcs per box, 40boxes/ctn,2,000pcs/ctn, G.W.:8.7kgs,carton size:54*42*35.5cm
DESCRIPTION : 3 Ply MEDICAL disposable mask For Kids EN:14683:2019+AC:2019 Material: Outside layer 25g blue non-woven Middle layer-25g melt blow filter 99% Inside 25g white non-woven Size: 14.5*9.5cm Color:Blue and white, Certification:CE and FDA Model No : 3Ply MEDICAL For Kids . Quantity Pcs ; 10 Packing details : 10pcs per box, 100boxes/ctn,1,000pcs/ctn, G.W.:4.8kgs,carton size:54.5*42*26cm
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
