General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CEâ??certified Fully certified Chinese standard (GB/T 32610-2016) BFE <90% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Comfort Features Higher breathability due to the lightweight material The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) With the standard BFE being met, our masks effectively resist bacterial penetration with a rating of at least 95%. You can go about your day, knowing you are practically perfectly protected from the air pollutants around you. 100% compliant with regulations (CE, GB/T 32610-2016) Our daily protective masks are 100% CE certified. They are also in accordance with the Chinese standard GB/T 32610-2016. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The soft lightweight material of the masks makes them perfect for everyday use. The breathing resistance is low, and the light and soft material of the inner layer was specifically designed to make your mask-wearing more comfortable. Disposable In order for masks to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the WHO guidelines for correctly putting the mask on and off.
Filtration Efficiency: 95% Low Fluid Resistance: 80mmHg Meets EN14683 Rating Type II Standard. Ideal for procedures where low amounts of fluid, spray and/or aerosols are produced
Medical Face Masks
LIVE Stock for Hospital and Government (International) $2.20+ 10% commission 100m moq LOI and POF and authorisation letter from the Government or Hospital Up to 3b *LIVE Stock for Private (International)* $2.35- $3.00 + 10% commission 100m moq LOI and POF (Dated last 24/48 hours) Up to 3b *LIVE Stock for Hospital/Government (USA only)* $1.65- $2.3+ 10% commission 100m MOQ LOI and POF and an authorisation letter from the Government or Hospital It can't be exported to anywhere else. *Private Seller* *LIVE Stock for (USA only)* $2-$2.3+ 10% commission 100m MOQ (up to +), the price may decrease significantly LOI and POF then lawyer to lawyer for SGS. It can't be exported to anywhere else.
This disposable masks offers 3 layers of protection. FDA Approved. Min Order: 100pcs 50pcs per 1 pack Made in China Min order - Price 100 - $1.00 1000 - $0.80 10,000 - $0.60 100,000 - $0.50
Medical Face Masks Engineered to promote easier breathing, the NIOSH approved DF300 Series Flatfold Disposable Respirators are made with a multilayered absorption media that repels moisture and features a smooth inner lining for added comfort. INDUSTRIES & APPLICATIONS Construction respirable crystalline silica Fiberglass or Drywall Installation Cutting or Sanding Wood General Manufacturing
Outer: Non-woven Spunbond. Middle: Melt-blown. Inner 2 layers - Non-woven Spunbond. Bacterial filtration efficiency (BFE) 98%, Bub-micron particulate efficiency 0.1um (PFE) 95-98%
Product Description : Cup Face Masks (N95) FDA NO. : FDA Approval 3010374972 CDC Approval 84A-8109 Product Code : LYU Country Of Origin : China FOB + S&H Unit Price (USD) : Enquire for Volume Qty pricing via email only. Production Per Day : 20000pcs/day NOTE : Please Note That Prices Are Valid From 30 March To Subj To Avlb April 2020 As Prices Fluctuates Based On Market Demand.
Product Description : Face Masks (N95) FDA NO. : FDA Approval 3006534188 CDC Approval 84A-4329 Product Code : MSH Country Of Origin : China Packing Information : 20pcs/box. 20box/carton. Size 62*29*34 GW/NW 6kgs/5kgs FOB + S&H Unit Price (USD) : Enquire for Volume Qty pricing via email only. Production Per Day : 20000pcs/day NOTE : Please Note That Prices Are Valid From 30 March To Subj To Avlb April 2020 As Prices Fluctuates Based On Market Demand.
Product Description : Face Masks (N95) FDA NO. : 10062813 Product Code : MSH Country Of Origin : China Packing Information : PACK:5pcs/bag 40bags/ctn 200pcs/ctn SIZE:33*31*18cm G/N:3.8/1.2Kgs FOB + S&H Unit Price (USD) : Enquire for Volume Qty pricing via email only. Production Per Day : 50000pcs/day NOTE : Please Note That Prices Are Valid From 30 March To Subj To Avlb April 2020 As Prices Fluctuates Based On Market Demand.
Product Description : Medical Grade 3 Ply Mask FDA NO. : 10063173 Product Code : LYU Country Of Origin : China Packing Information : pack:50pcs/bag 1000pcs/ctn; size:0.036cbm; G/N:4.5Kgs/3.5Kgs FOB + S&H Unit Price (USD) : Enquire for Volume Qty pricing via email only. Production Per Day : 200000pcs/days NOTE : Please Note That Prices Are Valid From 30 March To Subj To Avlb April 2020 As Prices Fluctuates Based On Market Demand.
Our company offer high quality Disposal face masks. Our Protective Mask have 3-layer protection, dust filter layer, anti-moisture layer and PM2.5 prevention layer. Easy to use, comfortable and breathable with ear loop tie making it fit comfortable on your face. Disposable mask, effective in protecting against germs, dust and air pollution. Applicable for going outside, gardening, painting, construction, nail salons, medical, dental uses and people with allergies. Our product have been approved by FDA and ECM. Package will come in 50 pcs in one pack. Minimum order will be 100,000
Sterilized Custom Design Masks Print your own logo or pick between the fashionable designs already created. Support Breast Cancer Awareness or rock your favorite sports team masks Biomsk has you covered. Customizable packaging Blocks bacteria up to 14 days Wear Wash and Reuse its that simple, with Biomsk creating less waste and safer surrounding
Origin : South Korean Product : 3PLY face mask Price : usd0.14 per piece CIF by airway
Product Description : Medical Grade Disposable, Single Use KN95 Mask*, (* US Govt Debate on, contesting KN95 use ) FDA NO. : 10063173 Product Code : LYU Country Of Origin : China Packing Information : pack:10pcs/bag 200pcs/ctn; size:23.8*28.3*34.3cm; G/N:2.5Kgs/0.99Kgs FOB + S&H Unit Price (USD) : Enquire for Volume Qty pricing via email only. Production Per Day : 30000pcs/day NOTE : Please Note That Prices Are Valid From 30 March To Subj To Avlb April 2020 As Prices Fluctuates Based On Market Demand.
Product Description : PET Double-Sided Anti-fog Protective Mask FDA NO. : 3011712254 Product Code : KPY Country Of Origin : China Packing Information : pack:200pcs/ctn size:70*40*30cm FOB + S&H Unit Price (USD) : Enquire for Volume Qty pricing via email only. Production Per Day : 300-500 or custom NOTE : Please Note That Prices Are Valid From 30 March To Subj To Avlb April 2020 As Prices Fluctuates Based On Market Demand.
General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Optional feature Valved or nonvalved Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 99 Disposable Inward leakage lt2 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against variousnonoily airborne contaminants It is extremely effective 99 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP3 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP3 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Decide for yourself Vannin Healthcare Global is one of the rare suppliers who let you choose your FFP3 masks design at no additional cost If youre indifferent about the design of your respirator or just want to surprise your future self feel free to skip this step Choose the design Cupped or Folded Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket Remember if your mask gets damaged its best to just throw it away Folded masks on the other hand you can easily carry around in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask I want the folded FFP3 respirator mask The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masksfor safety reasons Th
General Features Size Universal Colour White Packaging 20 masks per box Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 94 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Folded Design You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks Valved The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles nbsp Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto
General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CEâ??certified In accordance with the European standard EN14683:2005 BFE â?¥98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of even smaller liquid droplets Splash-resistant ( >120 mmHg) Comfort Features Breathing resistance <49 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply Type II R face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants and penetration of bodily fluids. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II R medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98- 99.9% protected from inhaling airborne pollutants or hazardous splatter. 100% compliant with regulations (CE, EN14683:2005) Our 3-ply surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! Splash resistance The unique feature of Type II R surgical masks is the liquid-repellent layer offering additional protection against particulate matter and infectious splashes. The greater protective efficiency of the masks adequately makes up for the higher breathing resistance (<49 Pa/cm2). Disposable In order for your Type II R mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.
Product Type: High Quality Disposable 3ply Medical Face Mask Materials: PP nonwoven & filter paper & PP nonwoven Size: 17.5 x 9.5cm Weight: 25g + 25g + 25g Packing: 50pcs/box, 2000pcs/carton Color: blue * Disposable Face Mask Advantages: 3 layers of filtration, no odor, anti-allergic materials, sanitary packaging, good breathability. * Sanitary mask effectively prevent inhalation of dust, pollen, hair, flu, germ, etc.. Suitable for daily cleaning, allergic people, service personnel (medical, dental, nursing, catering, clinic, beauty, nail, pet, etc.), as well as patients who need respiratory protection * Three-layer folding: 3D breathing space