This rudder pintle sealing apparatus is compact in structure and easy to be maintained.It is suitable when the axial size is small
WTDM rudder pintle sealing apparatus This rudder pintle sealing apparatus is compact in structure and easy to be maintained,it is suitable when the axial size is small
This rudder pintle sealing apparatus is compact in structure and easy to be maintained.It is suitable when the axial size is small
The marine rudder is a main part of the steering system for vessels. The whole rudder system includes rudder blade, rudder carrier, rudder pintle, rudder stock, etc. We can design different types of the rudders as the requirement of our clients.
Indonesia Film faced Construction concrete form work Plywood / Marine Plywood Factory ***** Film Faced 120gr/m2 Black or Brown colors *** Mix hardwood Core , high density *** WBP Water resistant Glue *** Size 18mm x 1220mm x 2440mm = 13 plies *** 4 sides seal by water proof acrylic paint **** Proper cycling used time up to 10 times ***** Loading in 40 ft approx 896 pcs *** Packing in Corrugated Carton Box ***** Payment term by Bang Transfer = 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost ***** Please contact us for further details
Indonesia Film Faced Plywood Manufacturer and Exporter 2024 Film Faced Construction concrete form work or Marine Plywood water proof * Film Faced = Film 120gr/m2 Black or Brown * Mix hardwood Core , high density * 1 time or 2 times hot pressed * WBP Water resistant Glue * Common Size 18mm x 1220mm x 2440mm = 18.66 pcs / m3 * 13 plies or any sizes by demand * 4 sides sealed by water proof acrylic paint * MOQ = Loading in 40 ft approx 896 pcs *** Proper use cycling usage time more than 10 times * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Film Faced Construction concrete form work / Marine Plywood * Film Faced = Film 120gr/m2 Black or Brown * Could be printed buyer's logo on Film * Mix hardwood Core , 13 plies = high density * Face / Back Meranti hardwood veneer * WBP Water resistant Glue * Common Size 18mm x 1220mm x 2440mm * 4 sides seal by water proof acrylic paint * 1 time or 2 times hot pressed by demand * MOQ = Loading in 40 ft approx 896 pcs * Proper use cycling usage time more than 10 times * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Film faced Construction concrete form work or Water proof Marine Plywood ***** Film Faced specs = 120gr/m2 Black or Brown colors , *** Mix hardwood Core , high density *** WBP Water resistant Glue *** Size 18mm x 1220mm x 2440mm *** 13 plies *** 4 sides sealed by water proof acrylic paint **** Cycling used time for more than 10 times in proper used *** Loading in 40 ft approx 48 cbm = 896 pcs *** Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost and for saving time please do not send any inquiry for L/C buyers
Indonesia Origin Film faced Construction concrete form work / Marine Plywood ***** Film Faced 120gr/m2 Black or Brown *** Mix hardwood Core , high density *** WBP Water resistant Glue *** Size 18mm x 1220mm x 2440mm *** 13 plies *** 4 sides seal by water proof acrylic paint **** Used times more than 10 - 15 times in proper used ***** Loading in 40 ft approx 896 pcs *** Packing in Corrugated Carton Box ***** Payment term by Bang Transfer = 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost ***** Please dont send any inquiry for L/C used buyers and please contatc us for further details
We supply spirulina powder. Spirulina powder is a high quality spray-dried form of this blue -green algae. It is an excellent supplemental feed for filter feeding aquatic animals and those able to derive benefit from eating algae, such as the zoel and mysis stages of marine shrimp. Ingredients: Food Grade Spirulina algae, microfine. Feeding Guide: Spirulina is commonly used as a algal supplement in larval shrimp culture. The desired amount is hydrated in several liters of seawater for five minutes, and then administered to the larval rearing tanks. The amount to be fed over a day is broken up into several feedings. Species Stage Amount P.vannamei Z1 - Z3 2 - 4 M1 - PL1 1 - 2 P.monodon Z1 - Z3 2 - 4 M1 - PL1 1 - 2 Storage: This product is best stored under cool dry conditions where it can be stored in excess of six months. For longer storage, or to insure maximal retention of nutritional value, the product should be stored refrigerated or frozen. Once the container is opened, the product should be used within a short time, or stored in a tightly sealed container under refrigeration.
PRODUCT INFORMATION: Product Name: DRIED YELLOW STRIPE SCAD Origin: Vietnam Ingredients: 100% fresh yellow stripe scad (cleaned and sun-dried) Color: Light golden-yellow with a natural sheen Size: 8-15 cm per piece (customizable sizes available) Flavor: Savory and mildly sweet taste with a firm texture Condition: Carefully sun-dried to preserve natural flavor and nutrients Key Features: High in protein and essential nutrients No preservatives, artificial additives, or chemicals used Usage Instructions: Ideal for grilling, frying, or making snacks and side dishes Can be marinated with spices for enhanced flavor Shelf Life: 12-18 months when stored in a cool, dry place, away from direct sunlight and moisture Packing Details: Net Weight: 500g or 1kg per vacuum-sealed pouch (customizable) Packing: 20 pouches per carton box (10-20 kg per box) Carton Dimensions: Customized based on packaging requirements Material: Food-grade, moisture-proof packaging to maintain freshness Dried yellow stripe scad is a popular delicacy, known for its rich flavor and versatility in various traditional dishes. Perfect for both personal use and commercial purposes.
Type CRP20 CRP42 CRP85 CRP168 Input power max.(KW) 45 100 210 300 HP 61 135 285 400 Input torque max.(Sf=1) 200 420 850 1675 Input speed max. 2300 2500 2350 2000 Reduction Rate i I 1.93 2.5 2.68 3.46 I up 1.7 1.64 1.65 1.53 I down 1.13 1.52 1.62 2.26 propeller diameter Max. 500 800 950 1150 Min. 700 900 PAL length* Max. 2250 2800 2800 4250 Min. 350 875 980 1400 Weight (including blades, lubricating oil, and the minimum PAL) 65 190 300 1370 PAL increase the weight of kg per 100mm 8 9 20.4 40 PAL is the vertical distance from the center line of the center line of the power input flange.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Supply ship propulsion system, bow thruster, stern thruster, tunnel thruster, rudder propeller We can supply kinds of propulsion system such as: 1, bow thruster, stern thruster, tunnel thruster, rudder propeller, full-revolving rudder propeller 2, propeller: fixed propeller, controllable pitch propeller, high speed propeller, propeller cap, propeller hub, propeller shaft Class certificates: abs, gl, lr, bv, rms, nk, ccs, etc. Can be provided. Please feel free to contact with us freely for your inquiry: info at chinatopfar dot com
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Material Origin : Car Battery / Van Battery / marine batteries and industrial traction batteries. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. . Automotive Waste Batteries completely washed, cleaned with lead acid contents. RAINs per ISRI Specifications) (Product Detailed SpecWET/DRY WHOLE INTACT CAR LEAD BATTERIES(RINKs and ifications) height :116mm and whight :310 gr height :123mm and whight :350 gr Used Auto Battery Scrap Drained lead battery scraps Lead Battery Plate Scrap Type Battery Scrap 20D 16H Lead Battery Plates Scrap Lead Battery Plate Scrap Type soft lead scrap Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
marine water lubrication stern shaft (stern tube) sealing apparatus is suitable for kinds of ships, which are with water lubrication stern tube bearing. There is pneumatic seal, so that it can be inspected, adjusted, and maintained without docking. It suit for following shafting technical specifications Shaft dia.: 50mm to 800mm Shaft bush dia.: 70mm to 850mm Axis speed: less than 7m/s Lubrication water working pressure: less than 0.2MPa Pneumatic inflation pressure: 0.2MPa to 0.6MPa Average leakage rate: less than 300ml/h Axial movement: < ±0.5
marine water lubrication stern shaft (stern tube) sealing apparatus is suitable for kinds of ships, which are with water lubrication stern tube bearing. There is pneumatic seal, so that it can be inspected, adjusted, and maintained without docking.
1351 Clear glass Desiccator with porcelain plate Product Description It is a non-vacuum desiccator, and therefore has no stopcock. The sturdy glass top fits easily on the thick lip of the desiccator, and features a knob handle for removing or replacing the lid. The lips of both the lid and the desiccator itself are ground glass, and should be greased with petroleum jelly before use. In addition to helping create an air-tight seal, the grease also helps cushion the lid when it is set down in place. To help prevent damage from being set down too forcefully, the lid can be carefully slid on, or off, of the desiccator once greased. Desiccators can be used, though not exclusively, for preserving moisture-sensitive items, protecting hygroscopic or water-reacting chemicals, as well as removing traces of water from samples that need drying. There are 8 sizes available : 120 mm desiccator, 150 mm desiccator, 180 mm desiccator, 210 mm desiccator, 240 mm desiccator, 300 mm desiccator, 350 mm desiccator, 400 mm desiccator. Material: Glass Color:clear Key Product Features : 1. Removable Lid 2. Heavy duty 3. With a procelain plate 1352 Amber glass Desiccator with porcelain plate Product Description There are 8 sizes available : 120 mm desiccator, 150 mm desiccator, 180 mm desiccator, 210 mm desiccator, 240 mm desiccator, 300 mm desiccator, 350 mm desiccator, 400 mm desiccator. Material: Glass Color:amber Key Product Features : 1. Removable Lid 2. Heavy duty 3. With a procelain plate 1354 Clear glass Vacuum Desiccator with porcelain plate Product Description Desiccators are sealable enclosures containing desiccants used for preserving moisture-sensitive items such as cobalt chloride paper for another use. A common use for desiccators is to protect chemicals which are hygroscopic or which react with water from humidity. The contents of desiccators are exposed to atmospheric moisture whenever the desiccators are opened. It also requires some time to achieve a low humidity. Hence they are not appropriate for storing chemicals which react quickly or violently with atmospheric moisture such as the alkali metals; a glovebox or Schlenk-type apparatus may be more suitable for these purposes. Desiccators are sometimes used to remove traces of water from an almost-dry sample. Where a desiccator alone is unsatisfactory, the sample may be dried at elevated temperature usingAbderhalden's drying pistol. There are 7 sizes available : 150 mm desiccator, 180 mm desiccator, 210 mm desiccator, 240 mm desiccator, 300 mm desiccator, 350 mm desiccator, 400 mm desiccator. Product Features : Various specifications; Preferential price;High quality Material: Glass Color:clear
2 MILLION BARRELS (SPOT) WITH POSSIBLE CONTRACT BLCO TRANSACTION PROCEDURE FOR TTO DELIVERY: 1. Seller and Buyer sign and seal this contract including banking coordinates and exchange the signed copy by electronic mail. The electronic signed copy by both parties is considered legally binding and enforceable. 2. Buyer returns the signed copy with the ATB format (supercargo/inspector full boarding details). 3. Sellerâ??s vessel captain issues Marine ATB from his vessel domain according to buyerâ??s format via e-mail to buyer 4. Buyer issues Notarised/Confirmed Corporate Cheque of N200million which is cashable upon receipt of Attestation 5. Seller issues navy clearance through NNPC. 6. Upon both receipt and confirmation of ATB and Clearance by Buyer, Seller positions the vessel for Quantity and Quality analysis/test (QnQ). 7. Buyerâ??s Supercargo (must be NNPC registered) and a second Buyerâ??s Representative designatedsupercargo/Inspector go on board the sellerâ??s loaded vessel. If Buyerâ??s Supercargo/s is not NNPC Registered, Seller will pay the fees necessary to obtain temporary accreditation for the supercargo, on behalf of the Buyer. 8. Buyerâ??s supercargo confirms product and the vessel captain sends a confirmation/Attestation letter endorsed by the supercargo. 9. Upon receipt of Attestation, Buyer promptly wires N200,000,000.00 into Sellerâ??s Account 10. The Buyers Representative designated as supercargo/inspector, takes samples (total of 4 to 7 litres or as the Captain may allow), and disembarks from the vessel while the first supercargo remains on board until the completion of the TTO transaction. 11. Samples are sent to the laboratory (SGS OR INTERTEK) and Q&Q Report generated and sent to both Buyer and seller. Buyer issues a BG for total cargo, assuming a total volume of 2 million barrels. 12. Seller confirms the BG for total cargo. . 13. Final Q n Q Report is generated 14. Seller sends final commercial invoice (CI) to Buyer based on quantity of cargo. 15. Seller issues the full list of original copies of cargo documents** in the name of the off-taker nominated by the buyer. 16. Upon receipt of the cargo documents, Buyer makes payment for total cargo via MT103 less the N200,000,000 ($600,000). 17. Seller arranges for Buyer to talk to shipping company and take over vessel via charter party agreement. 18. Seller confirms payment for cargo made by swift via MT103 and pays commissions to all mandates & agents. Cost of payment transfer is borne by each individual/entity or Corporation 19. Buyer takes over vessel and sails to destination.
