We offer a wide range of marine fenders that are available in varied sizes such as VA, WA, PI, HA, DA and key. These vessels are designed and developed as per the international standards. They are used to protect the vessels from the berthing effect and minimize terminal maintenance, increases operational safety and ensure trouble-free docking in ports & harbors.
Rubber and tyre products The special orders are accepted under the availability of technical drawings
Material Natural Rubber Color Black Brand RABBIT Size/Dimension 75 mm x 75 mm to 150 mm x 150 mm Structure DO Type &DD Type Weight 24 KG per Mtr A marine rubber fender acts as a dock bumper to absorb the kinetic energy of a boat/vessel during berthing against a jetty or a quay wall. A superior fender product can protect both the vessel and the berthing structure berthed against, preventing any damage and save on repair costs. Our port and ship fenders are manufactured with quality raw materials and made sure to comply with various international industry standards.
Uhmwpe/hdpe marine fender panel. Anti corrosion, anti impact, anti uv, protect marine body!~~ High quality, low price, top service!
we manufacture and supply all kinds of marine fender systems required as per the customers requirements.
Cell rubber fender, Cone rubber fender, Super arch rubber fender, D type rubber fender, Tug rubber fender, W type rubber fender, UE type rubber fender, TT type rubber fender, foam filled rubber fender, Square rubber fender, pneumatic rubber fender, Wing rubber fender, etc.
Diameter As per Customer size or drawing Usage/Application Dock & Ship Material Rubber Type Rubber Fender Color Black
Keeping in mind the diverse requirement of the clients, we offer our clients technically advanced range of Boat Fenders that are available in different dimensions and specifications. They are valued for exceptional quality and are used in different industrial applications. Our entire product range is durable in nature. Features: Light weight High surface strength Durable finish Group Rubber Fender Category Rubber Fender Marine Fender
Arch fenders, sometimes called as v type fenders, can provide trouble-free service for protecting vessels and docks from damages even under the most severe conditions. Mounted to the docks horizontally or vertically using bolts, the fenders can absorb impact energy and dissipate stress evenly with improved performance comparing with cylindrical fenders. A black rubber arch fender with a layer of blue uhmw-pe to reduce the friction between the vessels and the dock. Features: Low reaction force and higher energy absorption than cylindrical fenders Single one-piece design. Strong, durable and long lasting. Easy and quick to install & maintenance free. Bolt-on uhmw-pe layer to reduce friction between the fenders and berthing vessels and prolong the life-span of rubber fender body. Ideal for berths serving all types of small and moderate vessels even in severe conditions. Recommended for almost all types of applications, such as quay walls, berths, general cargo and work boat harbors. Various types, height and widths are available.
Pneumatic Rubber Fenders Introduction Pneumatic fenders is a leading anti-collision device for marine application in the world today. This compressed air rubber fender is used as a protective medium. Therefore, pneumatic rubber fenders serves as a protective medium against collision when ship-to-ship contact (STS) and ship-to-berthing (STB). Pneumatic fenders has the advantages of massive energy absorption with low unit surface pressure acted upon the ship. So penumatic fenders has become an ideal ship protection medium used extensively by large tankers, LPG vessels, ocean platforms, large docks, harbor and wharfs.
Material Rubber Color Black Brand RABBIT Size/Dimension As Per Requirement Structure Standard Usage/Application INDUSTRIAL With state-of-thÂe-art infrastructure, we are engaged in manufacturing and supplying wide range of Marine Leg Element Fender. Acknowledged for their excellent performance, high tensile strength and durability, these fenders are easy to install. Compatible for various industrial applications, our fenders are available in varied specifications to meet clients needs. Furthermore, our range is tested on international quality parameters to render maximum client satisfaction.
UHMWPE sheets (Ultra high Molecular Weight Polyethylene) is a thermoplastic engineering plastic with the average molecular weight more than 6.0 million. (PE only has the molecular weight between twenty to two hundred thousand.) This kind of material with five top performance of high-wear-resistance, good-chemical resistance, low-temperature resistance, self-lubrication and high-impact resistance, which is regarded as a surprised engineering plastic of excellent comprehensive capacity and competitive price. 1.Abrasive resistance which always have in thermoelectricity polymer. 2.Best shock resistance even in low temperature. 3.Low frictional factor, and well sliding bearing material. 4.Lubricity( no caking, in adhesion) . 5.Best chemical corrosion resistance and stress craze resistance. 6.Excellent machinery process ability . 7.Lowest water absorption(
Features of pneumatic marine fender (1) High energy absorption The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Fenders use compressed air as the buffer medium to absorb ship impact energy and have good elasticity. (2) Ultra low back pressure The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure. (3) Inclined contact, good adaptability Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of pneumatic fender, its adaptability is much higher than other fender. (4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level Pneumatic marine fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving. (5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust. (6)Florescence pneumatic marine fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock. Application of pneumatic marine fender Pneumatic marine fenders are suitable for many applications including: *Tankers, Gas Carriers and Bulk Cargo Ships; *Fast ferries and aluminum hulled vessels; *Temporary of permanent installations; *Rapid response and emergency fendering; *As stand-off fenders to realign ships with shore facilities.
Features of pneumatic marine fender (1) High energy absorption The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Fenders use compressed air as the buffer medium to absorb ship impact energy and have good elasticity. (2) Ultra low back pressure The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure. (3) Inclined contact, good adaptability Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of pneumatic fender, its adaptability is much higher than other fender. (4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level Pneumatic marine fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving. (5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust. (6)Florescence pneumatic marine fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock. Application of pneumatic marine fender Pneumatic marine fenders are suitable for many applications including: *Tankers, Gas Carriers and Bulk Cargo Ships; *Fast ferries and aluminum hulled vessels; *Temporary of permanent installations; *Rapid response and emergency fendering; *As stand-off fenders to realign ships with shore facilities.
Cell fenders, also known as drum fenders, feature compressed drum-shaped structures for providing high force absorption and being little influenced by touches from berthing vessels at bevel angles. With simple but efficient geometry structure, cell fenders are extremely durable and stable especial where harsh berthing movements may be present. Meanwhile, it can provide minimum reaction per tom-meter energy comparing with cone fenders, arch fenders or others. Features: High efficiency and excellent shear resistance. High performance at angular berthing in that it can absorb energies from all directions equally. Impingements plates are available for smaller reaction force on vessels and even load distribution. Ideal for low hull pressure systems, oil and lng facilities, multi-purpose berths, offshore platforms and various types of terminals. A variety of sizes and types. Easy to install and maintain.
>hdpe marine fender types manufacturer< Based information: MaterialUhmwpe/ hdpe/pp, etc. SizeLength: max is 6.3m; width: max is 1.5m; can be customized. Thickness10mm-300mm , can be customized. ColorWhite, black, red, blue, yellow, green, etc. Can produce as customer's sample color. SampleSmall sample for free, customer need pay the freight. DesignCan produce as customer drawing. Character: Outstanding featureImpact resistant, hing abrasion resistance, temperature resistant, etc. Application Storehouse wall, port machinery, miningmachinery, building machinery, hopper, Transport machinery, foods, package, dock, foods processing, etc. Advantage Low cost, light weight, insulation, anti-aging, anti-uv, etc. Delivery term and packing: Moq 1000 kg Payment term T/t and l/c at sight. Port Qingdao, tianjin, shanghai, etc. Delivery term Within 7-25 days after received the deposit. Packing details Plastic film and pallets , can be customized.
Floating Fender Floating Fender has been used for almost 50 years, it's also called marine rubber fender or YOKOHAMA fenders. It is the leading anticollision device for marine application in the world. Floating Fender is used as a protective medium for ship to ship contact, ship to quay,and ship-to-berthing. Floating fenders are a type of marine equipments that are used to prevent boats, ships and other naval vessels from colliding against each other or against docks, wharves and piers. In other words ship fenders can be simply termed as a marine bumper. LCT use shipside marine balloon fender for STS Why Choose Florescence Florescence is a trusted supplier for shipyard, quay, harbors in the global market. Our factory in Shandong Province has been established for over 20 years. FLORESCENCE Floating Rubber Fenders are sent to lots of countries, including Indonesia, Singapore, America, Russia, etc. Products are certificated by CCS, ISO, ABS, BV, etc. It can be manufactured in different kinds of sizes and types according to the customers' requirements. Our floating fender business has recently opened the door to the Floating LNG market, one of the most challenging applications in the offshore industry. Several 3.3*6.5m size fenders will be used in between the largest floating production facility in the world and LNG carrier during the side-by-side operation. Florescence is currently in the process of developing larger size fender and advanced monitoring system to better serve our customer needs.
We are among the leading names in the industry offering an extensive range of Rubber Fenders that are durable in nature and have high strength. They are durable in nature and have smooth finishing standards. We are supported by advanced manufacturing unit that is outfitted with latest technologies thereby delivering world-class range of products. Available Fender : Super Cell Fender, Cone Fender, Cylindrical Fender, Square Fenders, D Type Fenders, Arch Fender, M Type Fender, Key Hole Fender, W Fender, Pre Curved Fender Features: Excellent construction Long lasting Superb measurement
Floating Fender Floating Fender has been used for almost 50 years, it's also called marine rubber fender or YOKOHAMA fenders. It is the leading anticollision device for marine application in the world. Floating Fender is used as a protective medium for ship to ship contact, ship to quay,and ship-to-berthing. Floating fenders are a type of marine equipments that are used to prevent boats, ships and other naval vessels from colliding against each other or against docks, wharves and piers. In other words ship fenders can be simply termed as a marine bumper. LCT use shipside marine balloon fender for STS Why Choose Florescence Florescence is a trusted supplier for shipyard, quay, harbors in the global market. Our factory in Shandong Province has been established for over 20 years. FLORESCENCE Floating Rubber Fenders are sent to lots of countries, including Indonesia, Singapore, America, Russia, etc. Products are certificated by CCS, ISO, ABS, BV, etc. It can be manufactured in different kinds of sizes and types according to the customers' requirements. Our floating fender business has recently opened the door to the Floating LNG market, one of the most challenging applications in the offshore industry. Several 3.3*6.5m size fenders will be used in between the largest floating production facility in the world and LNG carrier during the side-by-side operation. Florescence is currently in the process of developing larger size fender and advanced monitoring system to better serve our customer needs.
Low friction wear pads for marine and harbour construction Xinjiang uhmwpe fender, is a unique, low-friction ultra high molecular weight polyethylene (uhmwpe) with a molecular Truck docks Fenders for dock plate protection Dredges Slide wall fenders to protect dredge from barges. Boats Rubbing strips Low friction bushings Pilings Fenders Wear plates and slides Floating docks Wear plates where dock meets pillage Bushings for pivots Fenders Slide Please do not hesitate to contact us should you have any questions. Plastic film and pallets
