Manual Normal Temperature Road Marking Machine Suppliers and Manufacturers

The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.

Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.

Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.

AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.

Commodity:Sodium persulfate Molecular Formula : Na2S2O8 Molecular weight : 238.13 Description Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle. Transportation Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505 Water hazards class 1(slight water hazard) All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed. Package (1) In 25kgs net multiple paper bags with one PE bag inner (2) In 25kgs net PE bags (3) In 25kgs net woven bags with two PE bags inner (4) In 1000kgs net big woven bags with one PE bag inner The above package is also with a pallet 1000kgs each. Storage NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect. Application Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc. Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors; cleaning and etching of printed circuits),activation of copper and aluminium surfaces. Cosmetics : Essential component of bleaching formulations. Paper : modification of starch,repulping of wet - strength paper. Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans). Others : - Chemical synthesis - Water treatment(decontamination) - Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg) - Disinfectant ITEMS SPECIFICATIONS Appearance white crystalline salt Assay 99.0% w/w min Active oxygen 6.65% w/w min Chloride and chlorate(as CL) 0.005% w/w max Ammonia (NH4) 0.05% w/w max Manganese(Mn) 0.0001% w/w max Iron(Fe) 0.001% w/w max Heavy metals(as Pb) 0.001% w/w max Moisture 0.05% w/w max Decomposition of the product as supplied at above 65C Recommended storage temperature Normal Temperature Storage stability as from date of delivery 12 months

Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide. Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity. Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3. Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials. Spillage Treatment Method:Simple cleaning and burying Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun. Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Other Information: Anti-caking agent can be added at the request of customers. Technical Specifications Analysis items Standard Na2SiF6 99% min Loss of weight on drying at 105â?? 0.3% max Free acid (as HCl) 0.1% max Chloride (as Cl) 0.1% max Sulphate (SO4) 0.3% max Iron(Fe) 0.02% max Water-insoluble matter 0.5% max Particle size distribution Passing through 40 mesh sieve 98% min Passing through 60 mesh sieve 90% min Passing through 325 mesh sieve 25% max

Calcined Bauxite: Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application. We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices. Applications of Calcined Bauxite: Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%. Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement. Minimum Order Quantity : 1 Containers

Fly Ash: Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries. The Major Utilization Areas Of Fly Ash : - Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC). - Part replacement of OPC in cement concrete. - High volume Fly Ash concrete. - Roller Compacted Concrete used for dam & pavement construction. - Manufacture of ash bricks and other building products. - Construction of road embankments, structural fills, low lying area development. - As a soil amender in agriculture and wasteland development. Types of Fly Ash: - According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties. - Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product. - Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash. - Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics. Minimum Order Quantity : 1 container

Quality: - 100% new crop 2022, Sorted and Cleaned by machine, no small/damage seeds. - Moisture: 10 % Max (dried perfectly) - Admixture & small seeds: 0.1% Max (Perfect cleaned) - Appearance: Natural Color Other names: - Korean Name: Nelubinis simen - Science name: Nelumbium speciosum Packaging & Shipping - Packing: 50 kg in Double PP bags. Print mark as per customerâ??s request. - Loading: 20 MTS /Cont 20 feet. - Loading Port: Ho Chi Minh City, Vietnam.

Storage Type : Normal Temperature Specification: Food hygiene and safety Manufacturer: 99 Gold Data Ingredients 100: % Wild Craft Sea Grapes Content: 100% seagrapes Instruction for use: Soak in water for 3-5 minutes Shelf Life: 12 months

ECO-FRIENDLY COCONUT SHELL BOW - Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE! - DIRECTIONS FOR USE * Before you use your coconut bowl, rinse it in water at room temperature. * Polish your coconut bowl from time to time with coconut oil. * Not dishwasher friendly. Wash off with soap and water. Do not soak for long time. * Do not overheat your coconut bowl and do not use it in the microwave, oven or dishwasher. * Do not leave the coconut bowl in a place with high humidity, so keep in a cool dry place before storing in the refrigerator.

- Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE! - DIRECTIONS FOR USE * Before you use your coconut bowl, rinse it in water at room temperature. * Polish your coconut bowl from time to time with coconut oil. * Not dishwasher friendly. Wash off with soap and water. Do not soak for a long time. * Do not overheat your coconut bowl and do not use it in the microwave, oven, or dishwasher. * Do not leave the coconut bowl in a place with high humidity, so keep it in a cool dry place before storing it in the refrigerator.

The crude mustard oil is dark brown in colour with a pungent odor. Refined mustard oil is used mainly for cooking as it is slightly more viscous and has a lower saponification value and a higher refractive index compared to other vegetable oils. Mustard Oil is obtained using cold press method which means the oil is extracted from the seeds by pressing the seeds at normal temperatures till they spill out oil.

Item: Sea Grapes Origin: Vietnam Packing: 100 gr/zip Color: Dark Green Usage : Step 1. Put salted sea grapes in a bowl of clean water ( 1 liters of water for 40 grams of salted sea grapes ). Soaking for 2 -3 minutes, it will be refreshed again, 40 grams salted sea grapes bloom into 100 grams sea grapes Step 2. Washing through with clean water 2 to 3 times. Step 3. Soaking sea grapes into a bowl of clean water for 3 to 5 minutes or longer depending on the taste of each person. Step 4. You can soak sea grapes in a bowl of ice water to make it more crunchy, cold and delicious. Step 5. Having directly like vegetables with any sauces Storage: 6 Months At Normal Temperature And 12 Months In Refrigerator (0C - 10C

Stainless Steel 6 Frame Honey Extractor , Manual Honey Extractor Machine Basic Information Place of Origin: Chin honey extractor Brand Name: supersweet honey extract Certification: ISO Model Number: sshe-02 Minimum Order Quantity: 10pcs Packaging Details: carton Delivery Time: 5-8 working days Payment Terms: D/P, D/A, L/C, T/T, Western Union, MoneyGram Supply Ability: 100000pcs

Product name: Marking machine Detailed product parameter description: Product model: marking machine Marking Machine

Tortilla Taco Chapati Roti Roasted duck bread thin bread Arabic bread making machine,1row ,2row customized 1. One side of this machine into the material and another side continuous out of bread,which does not need manual operation and has the characteristics of constant temperature baking and uniform fire color. 2. This machine has the mechanical and electrical integration of CNC regulation system, with the characteristics of small noise, high efficiency, low energy consumption and simple operation. Just need one person can operate. 3. The machine has a delicate construction, the material enter system work smoothly and not easy to make mistakes,the disassembly and cleaning is also very convenient. 4. The taste, diameter (8-50cm) and thickness (0.3-3mm), as well as color, speed of this machine can be adjusted at will. 5. Compared with traditional hand-made round bread, the products making by this machine with more regular shape, brighter color and stronger taste, which can be stored in low temperature for one month (frozen storage lasts for one year). 6. Imitation hand rolling bread, green food, without any additives. 7. This Machine can be made: Tortilla, Taco, Chapati, Roti,Single Round Bread, Roasted duck bread and so on. Application: This kind of new type automatic chapati making machine is widely used in organs, factories , school, hotel ,restaurants,etc food sectors.This machine can make waffle, pizza, thin bread,pancake, roti, chapati, tortilla etc,s very famous around the world Keywords : Tortilla Taco Chapati Roti Roasted duck bread thin bread making machine Tortilla Taco Chapati Roti Roasted thin bread making machine