Manganese sand filter materials Manganese sand filter material appearance rough brown or light gray, suborbicular, ingredient is manganese dioxide, content is between 35% and 45%. Use it to deal with groundwater, simple technology, convenient operation, cover an area of an area small, low engineering cost, long-term stability, the service period in 5 years, easy management, do not add any chemicals to remove the harmful material such as fe, mn, arsenic water, the purpose of the water quality fully meet the national drinking water standard, groundwater is a very good filter material processing. Manganese sand filter materials are using high quality domestic manganese sand, grain density, mechanical strength, strong chemical activity, not easily broken, insoluble in water, natural manganese ores. After the water washing grinding in removing impurity, crushing, drying, magnetic separation, screening, dust removal process into sand, etc. Then processed manganese sand according to certain gradation blending. It has the ideal water treatment filter, grading scale, making it in unit volume, specific surface area of the largest, the most powerful section carrying capacity, the catalytic oxidation of the largest and the smallest backwash turnover. Manganese sand filter materials used in the iron and manganese removal of domestic and drinking water filter device, the filtering effect is very good. Manganese sand filter material is mainly used to reduce the total iron, ferromanganese and manganese content in the water, according to china's domestic and drinking water hygiene standard gauge its iron long drink water containing high iron manganese content will seriously affect health.
Manganese sand
The appearance of the manganese sand filter material is dark brown, nearly round, and the main component is manganese dioxide, and the content is between 35% and 45%. manganese sand is used to treat groundwater with simple process, convenient operation, low engineering cost, long-term stability, service period of more than 5 years, easy to manage, and can remove harmful substances such as iron, manganese and arsenic in water without adding any chemical agents. The water quality fully meets the drinking water standard. It is a very good groundwater treatment filter.
Natural manganese ore in water.It is washed and removed by washing, crushing, drying, magnetic separation, screening, dust removal and other processes.Then the processed manganese sand is adjusted to a certain level.It has the ideal water treatment filter, grading scale, making it in unit volume, specific surface area of the largest, the most powerful section carrying capacity, the catalytic oxidation of the largest and the smallest backwash turnover.[1] Manganese sand filter material appearance is black brown, nearly circular, main component is manganese dioxide, content is between 35%- 45%.
Natural manganese sand is a kind of strong oxidant, oxidation of ferrous iron in water, iron and manganese removal filter device used in drinking water, groundwater used to purify the water quality in addition to iron and manganese. Natural manganese sand filter material is made of high quality natural manganese ore and brown on the appearance, for groundwater iron and manganese removal filter has a unique effect. Manganese sand filter material is mainly used for groundwater iron and manganese removal filter, the product is made of natural manganese sand or manganese ore raw materials, the screening of different manganese sand filter materials processed into content. Spherical, brown appearance, has the good performance of iron and manganese removal. As the manganese form of manganese sand filter materials are mainly composed of manganese dioxide. According to different processing purposes, choose different content of products, with MnO2 content not less than 35% of manganese sand filter material can be either manganese removal, and in addition to iron, MnO2 content less than 30%, only appropriate groundwater in addition to iron.
Manganese is one of the most commonly used industrial metals in the world with a long and established history We are a leading supplier of manganese from Brazil an essential steelmaking input and also of ferroalloys combinations of iron and one or more chemical elements such as manganese itself
Our premium manganese from South Africa is celebrated for its high purity and robust quality, making it essential for steel production and various industrial applications. Carefully mined and processed, our South African manganese guarantees superior performance and reliability, meeting the rigorous standards of the global market.
Classification: MANGANESE Commodity: Manganesium 42% - Bulk Quality/Purity: 42% Price Conditions: FOB Price: Negotiable Origin: BRAZIL, Port of BARCARENA. Duration of Contract: Annual contract, renewable for the same term. Minimum amount: 30.000 MT x Month Total / Contract Quantity: Annual sales contract with initial delivery of 30,000 until reaching 50,000 Metric Tons per month. We have an important Mineral Reserve, we are able to meet the delivery and shipment goals that are scheduled. Inspection: Fresh SGS / access to the port or collection point requested during the assignment of Laycan SGS every 10,000 mt for quality control Payment method: Direct bank transfer to the Seller's accounts of each load or Letter of Credit SBLC TM799 for the total annual amount of the contract + MT103 paid and discounted against a 100% approved SGS certificate, issued every 10,000 tons at the port of shipment. Delivery Documents: All product certificates, batch numbers, Fresh SGS, delivery schedule
We supply the Quality Ferro Alloys Like Ferro Manganese HC / MC / LC Grade I II III Mn 65% min 70% Min 75% Min Si 2% Max 2% Max 1.50% Max C 8% Max 8% Max 8% Max S 0.05% Max 0.035% Max 0.03% Max P 0.40% Max 0.30% Max 0.25% Max MC FeMn Mn 70%Min /75% Min / 78% Min Si 1.50% Max C 1.50% MAX S 0.03% Max P 0.25% Max Ferro-Manganese Ferro-Manganese is an alloy with high percentage of Manganese, which is made by heating a mixture of the oxides MnO2 and Fe2O3 and coal & coke with high carbon content in a blast furnace or an electric arc furnace-type system. The oxides go through carbothermal reduction in the furnaces that result in producing the Ferro-Manganese. Ferro-Manganese is used in the production of steel which acts as an excellent deoxidizer and desulfurizer. We supply the one variant of Ferro Manganese: High Carbon Ferro-Manganese.
We are exporter of Ferro Manganese - Standard Grades Mn : 70% Min. / 76% Min Si : 1.5% Max. C : 6-8% P : 0.30% Max. / 0.35% Max. S : 0.03% Max. Size : 10 - 80/100 mm
We are exporter of Silicon Manganese We Offer Silicon Manganese Size : 10 - 60 mm Mn; 65 to 70% Si : 16 %c : 2 % P : 0.15 % S : 0.01 %
We supply the Quality Ferro Alloys Like Silico Manganese HC Grade I II Mn 60% min 65% Min Si 14% Min 15% Min / 16% Min C 2.50% Max 2% Max S 0.03% Max 0.03% Max P 0.30% Max 0.30% Max Silicon Manganese Size : 10 - 60 mm Mn; 65 to 70% Si : 16 %c : 2 % P : 0.15 % S : 0.01 % High Carbon Silico Manganese - Standard Grades Mn : 60% Min. / 65% Min. / 70% Min. Si : 15% Min. / 16% Min. / 17% Min. C : 2 % Max. P : 0.30 % Max. S : 0.03 % Max. Size: 10 - 60 mm
We are supplier and exporter of Manganese Oxide. Manganese Oxide Fertilizer Grade: Application: The product is generally used by the fertilizer industry. Fertilizer Grade: Appearance: Fine greenish-brown powder Total Manganese (Mn): 54% +/- 2% Manganese Oxide (MnO): 68% Iron as Fe: 12% max. Silica as SiO2: 12% max. Alumina as Al2O3: 5% max. Manganese Dioxide (MnO2): 2% max. Screen analysis 100 mesh (BSS): 95-100% Passing. Manganese oxide Mn :- 44 - 46 % Mno2 :- 06 % max. Sio2 10 % max. Fe203 :- 08 % max. 50 kgs. Hdpe begs.
We are supplier and exporter of Manganese Dioxide. Manganese dioxide used as an oxidizing agent in various processes and industry. Also used in pigments & dyes, glass, battery, water treatment etc.
We can supply Silico Manganese Slag in Bulk Quantity Origin - KSA Qty - 75000 MT Loading - Loose
Art Bent LLC manufacturer of Ferro Silico Manganese for various industries. We can provide Ferro Silico Manganese Based on your request and specification. Packaging details: Big Bags up to 2.0 tons. Loading options: 20ft container up to 25 tons per container. We have 3 different specifications: Ferro Silico Manganese: (Type 1) Mn68% Min Si 16% Min C 2.0% (No mor then) P 0.2 (No mor then) S 0.03 (No mor then) Size: 20-80 mm, not less than 95%; Packing: 1.25 tons per Big Bag. Ferro Silico Manganese 2: (Type 2) Mn 65% Min Si 15% Min P 0.25% Max C 2% Max S 0.04% Max Standards: ISO 5447-80 Size: 10-50mm; Packing: 1.25 tons per Big Bag. Ferro Silico Manganese 3: (Type 3) Mn 70% Min Si 16-17% Min P 0.3% Max S 0.03% Max C 2% Max Size: 10-80mm; Packing: 1.25 tons per Big Bag. Good quality with consistent supply. We can provide samples for testing Long terms contract available. We are searching for mutual cooperation with long terms contract. Please send us your requirements and specifications of orders via email or WhatsApp
Silico Manganese is an alloy with 65% to 68% manganese, 16% to 21% silicon, and 1.5% to 2% carbon. Silico Manganese, also known as SiMn, is a remarkable alloy that combines the power of silicon and manganese to create a material like no other. This extraordinary blend enhances the strength, hardness, and resistance of steel, making it ideal for a wide range of applications in construction, manufacturing, and beyond. One of the standout features of Silico Manganese is its ability to improve the quality of steel, elevating it to new levels of excellence. By infusing steel with silicon and manganese, this alloy enhances its overall performance, making it more durable, corrosion-resistant, and capable of withstanding extreme conditions. Whether it's in the construction of towering skyscrapers or the manufacturing of heavy machinery, Silico Manganese ensures your creations stand the test of time.
Art Bent LLC is the producer of Ferro silico manganese for different types of industries. We supply Ferro Silico manganese for different types of industries. Packaging details: In Big bags up to 2000 kg. Loading into 20ft dry containers up to 25 tons per container. We have 3 different specifications: Ferro Silico Manganese: (Type 1) Mn 68% Min Si 16% Min C 2.0% (No mor then) P 0.2 (No mor then) S 0.03 (No mor then) Size: 20-80 mm, not less than 95%; Packing: 1.25 tons per Big Bag. Ferro Silico Manganese 2: (Type 2) Mn 65% Min Si 15% Min P 0.25% Max C 2% Max S 0.04% Max Standards: ISO 5447-80 Size: 10-50mm; Packing: 1.25 tons per Big Bag. Ferro Silico Manganese 3: (Type 3) Mn 70% Min Si 16-17% Min P 0.3% Max S 0.03% Max C 2% Max Size: 10-80mm; Packing: 1.25 tons per Big Bag. We have the good quality and consistent supply. We are ready to provide samples for testing. Long terms contract available. We are searching for mutual and long-term cooperation. Please send us your requirements and specifications of orders via email or WhatsApp.
We are supplier and exporter of PVC Resin. PVC resin, the physical appearance is white powder, non-toxic, odorless. Relative density 1.35-1.46. It is thermoplastic, insoluble in water, gasoline and ethanol, expandable or soluble in ether, ketone, fatty chlorohy-drocarbons or aromatic hydrocarbons with strong anti--corrosiveness, and good dieletric property. PVC resin can be processed into various plastic products.
We are exporter of Manganese Ores. Manganese Ore from lower grade 40 % to 50% is available. The Manganese Ore superior grade available with us is black in color, have excellent hardness, and possesses balanced chemical composition. Thus, our Manganese Ore is pure and is widely required in varied industrial applications.
