Drum type magnetic separator is most useful for separating tramp iron from non magnetic material processed in bulk quantity, for the purity of end products, recovery of metal having commercial value and protection of processing plant and machinery. These are widely used in all the processing industry for separation of iron contamination from minerals, chemicals, food, flour, plastics, grains, sand, cement, fertilizers, abrasives, glass, slag, ores, rock, refractory and many other products. Salient features: - drum consists of high powered anisotropic permanent magnet - strong & rugged construction. - automatic separation of ferrous material. - completely enclosed design to avoid dusting and pollution.
Single Drum Type Magnetic Separator Our Permanent Drum type separators are widely used for separating tramp iron from nonmagnetic material to attain the purity of end products It also helps in protecting processing plants and machinery by recovering metal impurities having commercial value as well Single Drum Type Magnetic Separator is widely used in all the processing industries for the separation of iron contamination from minerals chemicals food grains sand plastic fertilizers slag ores etc Double Drum Type Magnetic Separator Double Drum Type Magnetic Separator is mostly used for achieving the highest end product purity The material passes through the magnet twice in a Double Drum type machine Mainly it is used for the separation of iron contamination from Minerals Chemicals Refractory and many other products In Double Drum Type Magnetic Separators high power permanent magnetic plate is provided at the material outlet Modern and Isotropic Permanent Magnets are used having the highest coercivity and everlasting magnetic strength Machines are available with vibrating material inlet hoppers and a totally enclosed design to avoid dusting and pollution Online fitting design is also available as per requirement Triple Drum Magnetic Separator with Control Panel Triple Drum Type Magnetic Separators are also available on demand Salient Features Drum consists of high coercivity modern anisotropic permanent magnets Strong and rugged construction Automatic separation of iron impurities Completely enclosed design to avoid dusting and pollution Special size and capacity Drum Separators can be supplied as per requirement The larger the diameter and width of the drum the greater the volume of material that can be handled Magnetic Materials Magnetic separators are offered with two different types of magnets Ferrite Magnet The magnetic separator with ceramic magnet is useful for the application where free and larger iron particles are to be separated The average magnetic intensity on the magnetic drum surface will be 15002000 Gauss Rare Earth Magnet The magnetic separator with highintensity Rare Earth NdFeB Neodymium Iron Boron magnets is useful for removing magnetic contamination with low magnetic properties and fine iron particles The average magnetic intensity on the drum surface will be 3500 5500 Gauss
Our wet drum separator is used to remove very fine magnetizable components from lowconcentration lowviscosity liquids The wet drum separator is intended for use in the metal processing industry and the treatment of preconcentrates extracted from the high gradient magnetic filter In a wet drum separator around 90 of the grain sizes ranging from 1 m to 1000 m can be separated as sludge Salient Features Wet drum magnets have high magnetic recovery and discharge The feed slurry recovers the magnetic impurities Available in single or multidrum models Permanent magnet assembly eliminates coil burnouts The magnetpole elements are bolted to a mild steel shaft The drum is made from thick stainless steel for long life Wet drum separators are available in different configurations like single double and multiple drums In a double drum two separators are arranged backtoback with a common feed Applications Glass Industry Chemical Industry Plastic Industry Mining Industry Food Industry Pharmaceuticals industry Foundry Industry
Dry permanent magnetic separator for block ore is a kind of new type separation equipment for ore with high-performance. Besides existing types of magnetic drum separators, our company can also develop magnetic separators (or magnetic pulley) which can possess various magnetic induction intensities with different types of belts according to customers' requirements. This dry drum magnetic separator has the following advantages: high magnetic induction intensity, advanced structure, light weight, reliable operation and easy maintenance. Applications: (a) for pre-separating at magnetic separation plants, to remove stones mixed in ores, restoring the geologic grade of ores, saving enery and increasing the treatment capacity of the plant. (b) used in mining stope to recover iron ore from waste stones and improve resource utilization rate. (c) for slag treatment at steel mills to recover metal iron. (d) for garbage disposal to separate and recover usable metal which would be helpful to the environment. Electromotor power and belt length can be designed according to site conditions.
Wet Permanent Drum Magnetic Separators Are Used In Dense Media Separation (dms) Plants For The Recovery Of Magnetic Particles From The Dilute Medium. They Must Recover The Maximum Amount Of Magnetic Particles At The Highest Possible Density. A Wet Drum Separator Consists Of A Stationary Magnet Arc Around Which A Drum Rotates. The Drum Is Partially Submerged In A Tank Which Follows The Contour Of The Drum. Qj-ct(s/n/b)wet Permanent Drum Magnetic Separator Is A Wet-type Low-intensity Magnetic Separator With Relatively High Magnetic Field And The Most Efficient Magnetic Separation Equipment With Strong Magnetism For Minerals. Qj-ct(s/n/b) Wet Drum Magnetic Separator Is Ideally Used To Separate Ferrous Particles From Non-ferrous Particles. This Kind Of Magnetic Separators Are Made By Us To Provide Ultimate Protection To Crushers, Grinders, Pulverizers And Allied Equipment And Is Useful For Mining And Ore Dressing Industry, And Can Be Equipped With Semi-conflow(ctb), Con-flow(ctn) And Co-flow(cts) Tanks According To Customers' Requirements. Its Magnetic Induction Intensity Can Be Designed In Accordance With Specific Mineral Properties And Operation Processes. Characterized By Advanced Structure, Light Weight, Reliable Operation, Easy Maintain, Serialized Products And Standardized Parts, The Wet Magnetic Drum Separator Can Meet The Needs Of Plants Indifferentsize. Qj-ct(s/n/b) Applications: (1) For Primary Rough Dressing And Refused Tails, Increasing Recovery Rate And Reducing The Load Of Second-stage Grinding. (2) For Concentration Of Ferromagnetic Minerals, Increasing Ore Grade And Recovery Rate. (3) Used Before High-magnetism Separation To Remove Ferromagnetic Minerals From The Ore And Prevent Magnetic Clogging. (4) For Recovery Of Heavy Media At Coal Processing Plant We Can Design As Your Require
QJ-FK Dry Permanent Magntic Separator for Powder Ore is high-efficiency ore concentration machine newly designed by our company which is widely used to remove, purify or separate materials, allowing them to be of higher values. This kind of dry power permanent magnetic drum separator is characterized by its turbulent magnetic field and high separation factor, advanced structure, light weight, large throughout, reliable operation and easy maintenance. Rely on our elaborative efforts, it becomes great for the dry and arid regions to save water resources and reduce production cost, opening a new way for magnetite mining and utilization. The dry permanent drum magnet separator for fine ore also can be driven by diesel engine, if it is used in region which is short of electricity Apart from existing fixed types, this kind of dry type magnetic drum separator with different magnetic induction intensity and application for different magnetic materials can also be developed according to the specific requirements of customers. The current magnetic separator series are appropriate for the different size mines from large to small. Moreover, we have industrial prototypes and could provide pilot tests at customers' request. Dry drum magnetic separator is mainly used in the following applications: (a) For pre-separation of low-grade ores, to pre-concentrate ores, raise ore grade and reduce production cost. (b) For re-separation of tails, to recover relatively rich tails on the dry slope of tails dam. (c) For magnetic purification of dry fines of pyrite cinder. (d) To effectively remove iron from non-magnetic materials with lower cost. (e) For purification of concentrated fines, to remove lean associated materials and gangue from concentrated iron fines, lead to the grade improvement of fines and increase the technically-added value of products. TYPE Drum Dia*Length(mm) Rotational speed (r/ min) Magnetic induction on drum surface in separation(mT) Upper limit of particle size of raw material (mm) Capacity(ton/unit*hour) Weight (ton) Overall weight of plant(ton) 6.5 External dimension(mm)
Our Inline drum magnetic separators can be installed in the feed lines such as the outlet of the elevator screw conveyor etc Flangedtype inlet and outlet connections are provided The magnetic drum incorporates highintensity strontiumrare earth magnets These are widely used for cattle feed plants flour mills rice mills minerals refractories glass and many other products Salient Features Drum consists of higher coercivity modern anisotropic permanent magnets Strong and rugged constructions Automatic separation of iron impurities Completely enclosed design to avoid dusting and pollution Inlet and outlet flange installation is available
Mas baiyun ctb wet drum separator is newly developed iron ore concentrating equipment under wet conditions.It has been designed by engineers having a wealth of knowledge and data, gained over many years of wet drum applications and experience. We offer a complete service to mining and mineral industries. Our wide and competitive wet drum separators allow us the freedom to select the correct size and type to meet precisely your process needs in the best techincal and cost effective manner. This kind of magnetic separator can provent the final product from the secondary contamination because of the washing action adopted in the processing. It is equipped with a respective spray pipe for feed and concentrates, and water amount can be adjusted so as to assure suitable density of the concentrate. It can be equipped with cocurrent, counter-rotation and counter current tanks, and equipped double drums or three drums according to requirements of customers. Plastic packing
Strong induction intensity The equipment has high magnetic induction intensity to attract the ore with size up to 350mm, and can be applied with various model belts according to the customersí» demands.It is mainly used at the preseparation Stage to rejecting excess gangues. Maximise recovery of ferrous metals High performance magnet design to suit your application (ferrite, rare earth) to provide the most effective and efficient method of metal recovery. Minimise maintenance Wear resistant non-magnetic drum skin. Permanent magnet drums are built using high intensity non-deteriorating material, so not only is no power required to the magnet, but it will also provide maximum magnetic force for the lifetime of the machine. High permeability magnetic circuit to minimise stray magnetic fields, prolonging their life. Optimise throughput Deep field magnet systems penetrate through the product burden and remove the maximum amount of ferrous metal. This allows for a higher throughput of material to be separated efficiently. Plastic ppacking
CTB(S,N) Wet Drum Permanent Magnetic Separator in pioneers is suitable for concentrating magnetic materials from non-magnetic materials by the difference of mineral magnetic coefficient and the machine magnetic system and mechanical drive. CTS magnetic separator is downstream type magnetic separators, CTN model is called counter-current type magnetic separator and CTB model is normally named as semi-countercurrent type magnetic separator.
CTDG Dry Magnetic Separator is a new type high-efficiency magnetic preseparation equipment for materials with big size, such as lump iron ore,mill sales and other ferrous metals.
MAS Baiyun CTB Wet Drum Separator is newly developed iron ore concentrating equipment under wet condition.It has been designed by engineers having a wealth of knowledge and data, gained over many years of Wet Drum applications and experience. This kind of magnetic separator can prevent the final product from the secondary contamination because of the washing action adopted in the processing. It is equipped with a respective spray pipe for feed and concentrates, and water amount can be adjusted so as to assure suitable density of the concentrate. It can be equipped with cocurrent, counter-rotation and counter current tanks, and equipped double drums or three drums according to requirements of customers.
MAS Baiyun YC dry drum magnetic separator can attract dry magnetic powder from the non-magnetic materials continuously and automatically. The unique design for magnetic circuit and the magnetic source is made up from the NdFeb with high performance. Featuring with powerful magnetic force and high efficiency for tramp iron-elimination, it can be widely arranged in the lines such as grinding,fire-proofmaterial,foodstuff,feed,buildingmaterial,ceramics,raw material for glass, renewable rubber powder, PVC powder, quartz sand,and chemical industry and so on. Feeding capacity can be adjusted to meet the different granularity requirement. It is characteristic with exempt-maintenance,energy saving, cost-lower,safety and reliability.
Hmds wet magnetic drum separator is widely used in coal mine processing. With the development and expansion of heavy media processing technique, drum separator for heavy media processing is widely used in coal-washing plant. The structure of coal mine used drum separator has never had big change, while with the application of new magnetic material, magnet developed from simplex ferrite, mixed magnet to rare earth super strength magnet. Magnetic intensity was raised greatly, improving the recovery percent and lowering media consuming effectively. Features: 1. Important role in coal mine recycling 2. High minmal permanent magnet 3.Keep magnetism for long time 4.Duble stainess steel structure of the pullyer 5.High recycling rate Heavy media content rcycling rate 87-130kg/m3 >99.7% 130-260kg/m3 >99.8% >260kg/m3 >99.9%
Magnetic Writing and Drawing Board Material: ABS+ Magnet
Door Magnetic Catcher
Ejet magnetic equipment magnetic pulleys would supply you more magnets of what you want for greater attracting power and holding power, keeping harmful, dangerous ferrous particles out of your processing system or redeem valuable ferrites from other substances. Application: Waste recovery Mining Recycling applications Cement Coal handling plant Refractory Minerals
Eddy current separator is mainly used to recycle copper, aluminum and other non-ferrous metals from industrial waste and solid waste. It is widely used in environmental protection industries, like waste classification, waste electrical and electronic equipments recycle, and the treatment of non-ferrous metal industrial materials. The separation efficiency is good for a wide range of non-ferrous metals, which features strong adaptability, and reliable mechanical structure, high efficiency in separation. Standard features and benefits : 1. Ndfeb permanent magnet , powerful magnetic field. 2. Reasonanle structure, convenient installation, easy operation and maintenace. 3. Import main parts to insure stable and reliable performance: nord gear motor, nsk bearing, seigling belt, schneider electric parts. 4. Safety protective facilities.
Has a secure working system. Easy to maintainance. Provide high efficiency in business. Optional sizes can be designed. using in the sectors such as ceramic,porcelain, metal, food, plastics,paints and so on.
Eddy current separator, magnetic separator, drum magnetic separator, magnetics pulley.
