*AZ91E *ALMG %50-50 *AZ91D *AM50 *AZ63 *AM60
Re mg ca si almax 0.5-0.8 6.0-8.0 1.8-2.1 44-48 1.0 0.7-1.0 5.0-6.0 1.5-2.0 44-48 1.0 0.8-1.2 6.0-6.5 0.8-1.2 44-48 1.0 1.0-1.5 5.5-6.0 1.0-1.5 43-45 1.0 1.2- 1.5 5.0-6.5 1.0-2.0 43-48 1.0 1.5-2.0 5.5-6.0 2.0-3.0 40-44 1.0 1.7-2.1 5.0-6.0 2.0-3.0 40-50 1.0 2.0-2.5 5.0-5.5 2.0-2.5 43-47 1.0 2.2-2.8 5.0-6.0 1.0-2.0 44-46 1.0 2.5-3.0 7.0-9.0 2.5-3.5 44-48 1.0 3.0-3.5 7.0-9.0 3.0-3.5 43-46 1.0 3.5-4.5 3.5-4.5 0.8-1.0 44-48 1.0 Size:2-12mm;5-25mm;10-30mm Packing: 25kg bag in 1mt big bag or 1mt big bag Chemical composition/size/packing can be adjusted according to customer's requirement. 25kgs or 1mt bags
Advanced magnesium alloy extrusion equipment Can meet the requirements of az series, zk series, rare earth magnesium alloy profile extrusion High precision & good straightness Can meet the requirements of various extrusion ratios
Cast aluminum-magnesium alloy Category:Aluminum alloy casting Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc. The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness. The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable.
Description: Magnesium and Magnesium Alloy sheets and Plates Alloy No. Products Temper Dimensions (mm) Thickness Width ength M2MAZ31B AZ40MAZ41M ME20MZK61M Hot-Rolled Plates H112 H24 10~70 800~1300 1000~3000 2MAZ31B AZ40MAZ41M ME20MMg99.00 Cold/Warm-Rolled Strips, Sheets and Please H24H18O >1.0~10.0 00~1300 =3500 >0.4~1.0 100~600 =2000 >0.25~0.4 100~300 =2000 0.2 3.0~6.0 Coil Weight:25-28kg
Our company is a professional manufacturer of magnesium extrusions in rods, bars, solid shapes, structural shapes, wires, tubes, hollow shapes and semi-hollow shapes. We are offered in a variety of standard alloys and forms as well as many special shapes tailored to a customer's particular requirements. Alloys available: zm21, az31b, az61a, az80a zk60a, we54a and we43a.
Extruded magnesium alloy bars, profiles and tubes Our company is a professional manufacturer of magnesium extrusions in rods, bars, solid shapes, structural shapes, wires, tubes, hollow shapes and semi-hollow shapes. We are offered in a variety of standard alloys and forms as well as many special shapes tailored to a customer's particular requirements. Alloys available: zm21, az31b, az61a, az80a zk60a, we54a and we43a.
The mg alloy has the good specification of casting, pressing, cutting, welding and processing, it can be processed into a plate, strip, tube, rod, bar and wire etc. Semi-continuous casting magnesium alloy rod:70-600 mm( dia.) Deformed magnesium alloy plate:10-300 mm(width), 0.5-100 mm(thickness) Deformed magnesium alloy shapes: 10-140 mm(dia.)
Primary magnesium ingots model number includes: Mg9998, Mg9995, Mg9990, Mg9980. Deformed magnesium alloy ingot model number are: AZ31B, AZ31C, AZ31D, AZ61, AZ61A, AZ80A, ZK40, ZK60A, Mg-Mn.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Magnesium Alloy Machining
Magnesium ingot: is it a new light corrosion of metal material, with a low specific gravity and large intensity of unit weight, high chemical stability of superior function, is widely used in automobile manufacturing, light industry, metallurgy industry, chemical industry, electronic industry and meter manufacturing, etc. Magnesium ingot Executive standard:GB/T 3499-2003 Product Specifications:7.5 ± 0.5kg, can according to the customer request specification production products product use: Mainly in the aluminum alloy production, die-casting production, steelmaking desulfurization three areas, and rare earth alloys, metal reduction and other domains. Magnesium ingot chemical composition
?item:aluminum magnesium alloy powder ?production process:dry ball mill production ?application:for welding industry and fireworks ?export packing:20kg per fiber drum or iron drum(370mm*480mm)
All the products are supplied to the standard astm b107. Basically, magnesium alloys az31b, az31s, az61a and az80a are available. In addition, we have the capability to provide custom alloys extrusion profiles.
Magnesium alloy castings can be produced by nearly all of the conventional casting methods, namely, sand, permanent, die-casting, etc.. How to choose the right casting method of a particular part depends on many factors such as its application, the properties required, the properties of the alloy, and the proposed design. Yirui magnesium, certified by iso9001:2008, is a professional manufacturer specialized in magnesium alloys. We provide all work in compliance with the astm standards. We guarantee that all of our products have the right chemical properties. No product leaves our company before being tested, inspected and approved.
Re mg ca si almax 0.5-0.8 6.0-8.0 1.8-2.1 44-48 1.0 0.7-1.0 5.0-6.0 1.5-2.0 44-48 1.0 0.8-1.2 6.0-6.5 0.8-1.2 44-48 1.0 1.0-1.5 5.5-6.0 1.0-1.5 43-45 1.0 1.2- 1.5 5.0-6.5 1.0-2.0 43-48 1.0 1.5-2.0 5.5-6.0 2.0-3.0 40-44 1.0 1.7-2.1 5.0-6.0 2.0-3.0 40-50 1.0 2.0-2.5 5.0-5.5 2.0-2.5 43-47 1.0 2.2-2.8 5.0-6.0 1.0-2.0 44-46 1.0 2.5-3.0 7.0-9.0 2.5-3.5 44-48 1.0 3.0-3.5 7.0-9.0 3.0-3.5 43-46 1.0 3.5-4.5 3.5-4.5 0.8-1.0 44-48 1.0 Size:2-12mm;5-25mm;10-30mm Packing: 25kg bag in 1mt big bag or 1mt big bag Chemical composition/size/packing can be adjusted according to customer's requirement. 25kgs or 1mt bags
