Find Verified Macclite Nonstick Appam 9 Kulis W O H Suppliers, Manufacturers and Wholesalers

1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc. 2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products. 3.Polyethylene glycol series products can be used as raw materials for ester surfactants. 4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry. 5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface. 6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler. 7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity. 8.PEG-4000 and PEG-6000 . 9.PEG8000 .

condition New power(w) 2500 weight 380 KG warranty 1 Year,Lifetime supports. place of origin China brand name Ying Machinery voltage 220V dimension(l*w*h) 1760x850x1680mm key selling points High Productivity Product Name Lal Mohan Kalojam Gulaabujaanu Gulab Jamun Machine Food Product Gulab jaman, Lal mohan, Gulab jam, Gulap jam Weight of Product 10-200g Proportion of Casing and Filling 1:9-10:0 Controller Touch Screen Function Filling & Forming & Encrusting Application Bakery ,Confecionery, Snack,Frozen Food-Laddu

Item: 100% food grade kraft + ripple wall paper +kraft paper pizza box Size: 6 inch, 7 inch, 8 inch, 9 inch, 10 inch or as per clientsâ?? requirement. Regular Material Structure: Outer liner: white cardboard, coated paper, art paper,duplex paper,fancy paper,recycled paper etc. Inner liner: corrugated (ripple wall)paper, kraft paper, special paper etc. Or as per clients' demand. Material weight: as per clientsâ?? demand. Logo/printing design: As per clients demand. Printing technology: CMYK litho printing, pantone color printing, flexo-printing, UV printing or as per clients request. Finish Processing: Glossy or Matte Varnish, Glossy or Matte Lamination, Gold or sliver stamping, Spot UV, Embossed, Creasing, etc. Reference dimension: 6/7 inch, W 18.5 cm X L 18.5 cm X H 4.5 cm 8 inch, W 20 cm X L 20 cm X H 4.5 cm, W 21.5 cm X L 21.5 cm X H 4.5 cm 9 inch, W 24 cm X L 24 cm X H 4.5 cm 10 inch, W 27 cm X L 27 cm X H 4.5 cm 12 inch, W 32cm X L 32 cm X H 4.5 cm

Item: white art board + corrugated paper +kraft paper pizza box Size: 6 inch, 7 inch, 8 inch, 9 inch, 10 inch, 12 inch or as per clients' requirement. Regular Material Structure: Outer liner: white cardboard, coated paper, art paper, duplex paper, fancy paper, recycled paper etc. Inner liner: corrugated (ripple wall)paper, kraft paper, special paper etc. Or as per clients' demand. Material weight: as per client's demand. Logo/printing design: With printing or not. As per clients demand. Printing technology: CMYK litho printing, pantone color printing, flexo-printing, UV printing or as per clients request. Finish Processing: Glossy or Matte Varnish, Glossy or Matte Lamination, Gold or sliver stamping, Spot UV, Embossed, Creasing, etc. Reference dimension: 6/7 inch: W 18.5 cm X L 18.5 cm X H 4.5 cm 8 inch: W 20 cm X L 20 cm X H 4.5 cm, W 21.5 cm X L 21.5 cm X H 4.5 cm 9 inch: W 24 cm X L 24 cm X H 4.5 cm 10 inch: W 27 cm X L 27 cm X H 4.5 cm 12 inch: W 32 cm X L 32 cm X H 4.5 cm

US WAREHOUSE: DDP TO USA Specifications: 1. Material: Plastic PS Thickened 2. Color: Blue 3. Expanded Product Dimensions: (53.35 x 32.68 x 25.79)" / (135.5 x 83 x 65.5)cm (L x W x H) 4. Packing Dimensions: (35.43 x 17.13 x 4.53)" / (90 x 43.5 x 11.5)cm (L x W x H) 5. Product Net Weight: 16.18lb / 7.34kg 6. Package Gross Weight: 19.40lb / 8.8kg 7. Folded product Dimensions: (33.46 x 14.96 x 3.94)" / (85 x 38 x 10)cm (L x W x H) 8. Chair Surface Dimensions: (11.81 x 10.63 x 1.38)" / (30 x 27 x 3.5)cm (L x W x H) 9. Desktop Dimensions: (33.46 x 25.59 x 1.97)" / (85 x 65 x 5)cm (L x W x H) 10. Umbrella Hole Diameter: 1.02" / 2.6cm

Price - Rs 4,999.00 Type: Standing Krishna Religious Idol & Figurine Material: Brass Suitable For: Table Dimensions: H- 9 x L- 4.5 x W- 3.2 Inches Weight: 2.0 Kg Brass Standing Krishna Idol : A Divine Addition to Your Home Brass Standing Krishna Kanha Lord Shri Nararayn Standing Narayan Stand Maha Vishnu Bhagwan Idol Best Gift handcraft craftsmanship by Shreeyaash. This Idol Unique Krishna on Bajath Kishan Playing Woodwind. Ruler Vishnu is one of the most loved Divine forces of the Hinduism since he has a place with the Trimurti Divine beings. Lord Vishnu is revered all around the country at sanctuaries and home both. Overpowering with the finesse of Ruler Vishnu is viewed as exceptionally propitious to defeat from the issue throughout everyday life. Lord Vishnu is otherwise called Narayana and he is the preserver of the universe. At the point when the lover love him, they get safeguarded with a defensive layer. On the earth, he has previously taken numerous Symbols. He has saved the world from the power of insidiousness. On Poornima, venerating Ruler Vishnu is thought of as extremely promising. Brass Krishna with Cutting work Configuration Is Made of Unadulterated Brass Material.A Workmanship Item Which Suits Best to Involve a Home Style And Office Stylistic theme Too , It tends to be best Use As giving Inspiration . About Item :Brass Krishna You Can Use as a Show-stoppers on Extraordinary Celebration Enhancing Reason . Top notch brass utilized as unrefined substance gives a collectible and regal focus on the sculptures. The sculptures are consumption safe and have an enduring sparkle. The Artistry of Shreeyaash Standing Krishna The Unique Standing Krishna brass idol from Shreeyaash is a lovely piece of craftsmanship that addresses quite possibly of the most cherished Hindu god, Lord Krishna. The idol is unpredictably created with impeccable meticulousness, making it a shocking expansion to any home or office stylistic layout. Lord Krishna is adored in Hindu folklore as the Lord of adoration, empathy, and happiness. The Brass Krishna idol portrays the divinity in a standing stance, with his right hand brought up in the Abhaya Mudra, and his left hand holding a woodwind. The idol stands 09 inches tall and is made of top notch brass, guaranteeing its toughness and life span. The unpredictable plan of the Unique Krishna brass idol exhibits the craftsman's authority of their specialty. The idol's clothing, extras, and elements are carefully cut, giving it a similar appearance. The sculpture's solid base guarantees it stays steady, even on lopsided surfaces.

L-Glutathione Reduced 70-18-8 The thiol group of a tripeptide formed by glutamic acid, cysteine, and glycine. It is an antioxidant that can prevent damage to important cellular components by reactive oxygen species such as free radicals and peroxides. CAS NO:70-18-8 Product Name :L-Glutathione Reduced Molecular formulaï¼?C10H17N3O6S Molecular Weightï¼?307.32348 EINECS NO:200-725-4 IUPAC nominate:(2S)-2-amino-5-[[(2R)-1-(carboxymethylamino)-1-oxo-3-sulfanylpropan-2- inchi InChI=1S/C10H17N3O6S/c11-5(10(18)19)1-2-7(14)13-6(4-20)9(17)12-3-8(15)16/h5-6,20H,1-4,11H2,(H,12,17)(H,13,14)(H,15,16)(H,18,19)/t5-,6-/m0/s1 InChIkey RWSXRVCMGQZWBV-WDSKDSINSA-N Canonical Smiles C(CC(=O)N[C@@H](CS)C(=O)NCC(=O)O)[C@@H](C(=O)O)N appearance White or off white powder determination 99% minutes chloride 200 ppm sulfate 300 ppm Amonium 200 ppm iron 10ppm arsenic 2 ppm heavy metal 10ppm Cadmium (Cd) 1ppm Lead (Pb) 3 ppm Sulfated ash 0.1% Dry weight loss 0.5% Shelf lifeï Properly stored for two years.

FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION 660cc - 1000cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 34 AH Number of Plates : 9 Dimension (mm)L : 195 Dimension (mm)W : 127 Dimension (mm)H : 200 Dimension (mm)H with T : 220 Battery Weight IN KG : 7

Specification Application EL-10 EL12 EL-20 HEL-20 1. Soluble in most organic solvents, dispersed in water, with excellent emulsification and diffusion properties. 2. In the textile industry, it is mainly used as a spinning oil for synthetic fibers such as polyester, polyacrylonitrile, and polyvinyl alcohol. It has emulsifying and anti-static effects, making the sizing soft and smooth, and reducing breakage; It can be used as a softening and smoothing agent in chemical fiber size, and can eliminate foam in synthetic size solution; HEL-20 also has the characteristic of low coking at high temperatures. 3. In the pharmaceutical industry, it is used as an emulsifier in the manufacturing of liniments, creams, emulsions, etc. 4. It can be used as pesticide emulsifier, lotion polymerization emulsifier, and used to prepare water-soluble metal cutting fluid and household washing products. EL-30 EL-40 HEL-40 1. Easily soluble in water, fatty acids, or other organic solvents, with excellent emulsification performance 2. Used as emulsifiers in the ink and pharmaceutical industries. 3. It can be used as an emulsifier for organic phosphorus pesticides. 4. Used as an o/w type emulsifier for emulsification of various planting, animal, and mineral oils. 5. EL-40 is used as a component of wool, wool oil and chemical fiber oil in the textile industry, which has both emulsifying effect and antistatic effect. It can be better mixed with other antistatic agent, and can also be used to prepare size to eliminate foam in synthetic size. EL-40 has excellent diffusion and protective colloid properties, and is used as a monomer in the wool spinning industry for blending with wool oil. It is easy to wash off and has good hard water resistance. 6. Used as a dehydrating agent for oil field raw oil. 7. Used in the metal processing industry to prepare water-soluble metal cutting fluids. 8. HEL-40 can be used as a pharmaceutical grade solvent. EL-60 1. This product is an o/w emulsifier. 2. It can be used as a chemical fiber oiling agent and a component of petroleum. 3. Pesticide emulsifier. 4. Petroleum dehydration demulsifier. 5. Ink, printing paste emulsifier. 6. Various planting, animal, and mineral oil emulsifiers. 7. Used as an emulsifier, fat enhancer, and emollient in the cosmetics and pharmaceutical industries. 8. It is used to manufacture shampoo foam bath liquid, skin care products, pharmaceuticals, etc. 9. Used in the metal processing industry to prepare metal cutting fluids. EL-80 EL-90

Molecular formula: Re Molecular weight: 186.207 CAS No.: 7440-15-5 Appearance: Dark grey Metallic Powder Specifications: main content Re 99.99% (calculated by subtraction method, excluding gas elements) Application: Rhenium element standard sample; Rhenium element additive for various superalloys; Base material for various rhenium components; 3D printing and others Hall flow (s/50g): 95% Other trace metal impurity , analysis method: ICP-MS Gas element (â?¤, analysis method: LECO Na 0.0005% Ti 0.0001% Cu 0.0001% Sb 0.0001% Mg 0.0001% V 0.0001% Zn 0.0001% Ta 0.0001% Al 0.0005% Cr 0.0005% As 0.0001% W 0.0005% Si 0.0005% Mn 0.0001% Zr 0.0001% Pb 0.0001% P 0.0005% Fe 0.0008% Mo 0.0010% Bi 0.0001% K 0.0005% Co 0.0001% Cd 0.0001% Se 0.0001% Ca 0.0005% Ni 0.0001% Sn 0.0001% Tl 0.0001% O 0.01% C 0.002% N 0.001% H 0.005% Applications 1. It is used to make heat-resistant and corrosion-resistant alloy. 2.Used for making high temperature thermocouple, special filament and catalyst in organic synthesis industry.

Phoxim is a highly effective and widely used organophosphorus insecticide that belongs to the family of carbamates. It is renowned for its exceptional pest control capabilities and its versatility in various agricultural and horticultural applications. Product Description Packaging & Delivery Packaging Detail: For liquid: 200LTR/drum, 20L/drum, 1L/bottle, 500ml/bottle, 250ml/bottle, 100ml/bottle. For solid: 25 kg/drum, 25kg/bag, 1kg/bag or on the requirement of client. Delivery Detail: 20-30days Specifications Common name: Phoxim (BSI, E-ISO, ESA); Phoxime ((f) F-ISO) IUPAC name: Chemical Abstracts name: A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile CAS RN: 14816-18-3 EC No.: 238-887-3 PHYSICAL CHEMISTRY Mol. Wt.: 298.3 C M. F.: C12H15N2O3PS Form: Yellow liquid; (tech., reddish-brown oil). M. P.: 6.1 C B. P.: Decomposes on distillation V. P. 2.1 MPa (20 C) K OW logP = 3.38 Henry 4.18 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 C) Solubility In water 1.5 mg/l (20 C). In toluene, n-hexane, dichloromethane, isopropanol >200 g/l. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 C). Gradually decomposed under u. V. Irradiation. MAMMALIAN TOXICOLOGY Oral Acute oral LD50 for rats: >2000 mg/kg. Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg. Not irritating to eyes or skin (rabbits). Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol). ADI (JMPR): 0.004 mg/kg b. W. [1999]. Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; R22 ECOTOXICOLOGY Birds LD50 for hens 40 mg/kg. Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l. Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes) Bees: Toxic to bees by contact and respiratory action. APPLICATIONS It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean. Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.

L 9" x W 6.5" x H 5"

Affordable Kaon Series Ubiquitous OCT Scanner for Ophthalmology This optical coherence tomography (OCT) scanner is compact, slit lamp base mountable, and quite versatile. Product Specifications: - Center wavelength: 840 nm - Imaging depth: 2.6 mm (in air) - Depth resolution: 9m (in air) - Lateral resolution: ~20m - Scan range: ~9 mm x 9 mm - Power Supply: USB-A and/or Power Adaptor - A-scan rate: 26,000 per second (typical) - Output power: 750W - Dimension: 200 mm(W), 80 mm(D), 150 mm(H) - Pixel resolution: Line (512, 1024), Volume (512 x 128) - Interface: USB 3.0 to external PC

Affordable Kaon Series Ubiquitous OCT Scanner for Ophthalmology This optical coherence tomography (OCT) scanner is compact, slit lamp base mountable, and quite versatile. Product Specifications: - Center wavelength: 840 nm - Imaging depth: 2.6 mm (in air) - Depth resolution: 9m (in air) - Lateral resolution: ~20m - Scan range: ~9 mm x 9 mm - Power Supply: USB-A and/or Power Adaptor - A-scan rate: 26,000 per second (typical) - Output power: 750W - Dimension: 200 mm(W), 80 mm(D), 150 mm(H) - Pixel resolution: Line (512, 1024), Volume (512 x 128) - Interface: USB 3.0 to external PC

Affordable Kaon Series Ubiquitous OCT Scanner for Ophthalmology This optical coherence tomography (OCT) scanner is compact, slit lamp base mountable, and quite versatile. Product Specifications: - Center wavelength: 840 nm - Imaging depth: 2.6 mm (in air) - Depth resolution: 9m (in air) - Lateral resolution: ~20m - Scan range: ~9 mm x 9 mm - Power Supply: USB-A and/or Power Adaptor - A-scan rate: 26,000 per second (typical) - Output power: 750W - Dimension: 200 mm(W), 80 mm(D), 150 mm(H) - Pixel resolution: Line (512, 1024), Volume (512 x 128) - Interface: USB 3.0 to external PC

Handheld Kaon Series Ubiquitous OCT Scanner for Ophthalmology This OCT scanner is optimal for patients in supine position as well as animals Product Specification: - Center wavelength: 840 nm - Imaging depth: 2.6 mm (in air) - Depth resolution: 9 micrometers (in air) - Lateral resolution: ~20 microwatts - Battery Details: Charging time: