1.Excellent dielectric property 2.Excellent water and oxidative resistant performance 3.Operating temperature range (-50C to 27;C) 4.Adhere well to metal, ceramic, rubber and other isolation materials 5.Excellent corona resistance 6.Non-poisonous and low volatile PROPERTY STANDARD VALUE Color Visual inspection Transparent/Light grey Density 25C, g/cm3 1.0 Penetration (Static) mm/10 250 Penetration (Dynamic) mm/10 350 Max Oil Bleed 24hours, 27;C 12% Max Volatility 24hours, 27;C 2% Max Volume resistance 27;C, ohm-cm61;¨¢1012 Dielectric constant MHz 2.9 Power factor 100Hz -10MHz 0.0025 dielectric strength 1.25mm gap, kV/mm 19.5 1 KG/Bucket, 25 KG/Bucket, 200KG/ Bucket.
It is widely used in blending industrial lubricating oils such as those for internal combustion engine, hydraulic facilities, gear, bearing, slideway and metal working, etc. The recommended dosage in oil is 0.5-3.0%. The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
This product is primarily used in blending marine oil and high quality internal combustion engine oil, especially the engine oil for high-sulfur fuel. It is brown liquid. The recommended dosage is 0.5-25.0%. Characteristics Strong acid neutralization capacity Good oil solubility Scatter glial and ash Good anti-rust and anti-foam ability Good thermal stability and hydrolytic stability Excellent performance of water resistance and high-temperature detergency. 200 liter metal drum (net weight: 200 kg/drum).
This gear oil additive package can be used in blending the following grads of API GL-5 vehicle gear oil: SAE90, 80W/90, 85W/90, 85W/140 and the following grads of industrial gear oil: N68, N100, N150, N220, N320, N460. It is brown transparent liquid. Characteristics: Be available for all kinds of base oils The GL-5 80W/90 vehicle gear oils with the dosage of 4.5% G353 have passed the test of CRCL-42, CRCL-33, CRCL-37 and CRCL-60 etc. The 320 heavy load industrial gear oils with the dosage of 1.6% G353 meet the standard of American steel USS-224. 200 liter metal drum (net weight: 200 kg/drum).
This product is a compound of zinc-dithiophosphate, detergent, dispersant and antioxidant. It is primarily used in blending various low-grade and middle-grade lubricant oils. With very low dosage, it can meet the requirements of SB/CB and SC/CC grade oils. The product is brown liquid. The recommended dosage is as below: API grade Single-grade Multi-grade SB/CB 1.8% 2.0% SC/CC 1.8% 2.0% SD/CC 3.5% 3.9% SE/CC 3.5% 3.9% SF/CD 4.0% 4.4%. CHARACTERISTICS Excellent detergency, dispersion and anti-oxidation ability. 200 liter metal drum (net weight: 200 kg/drum)
We are in strong position to supply : Barium petroleum sulphonate Grades: 45% and 55% of purity. Loading from china by sea. For more details, please contact us. Best regards.
We supply fuel additive : Vanadium inhibitor, Two grades, For gas turbine Packing: 250 kg net in steel drum Quantity: 3000mt per month Please contact us for details if you need. Best regards.
We are in strong position to supply : Tbn booster, Tbn 400, Calcium sulphonate Top quality, Loading from china by sea. For more details, please contact us. Best regards.
MEDISEA Sterile lubricating Jelly is used in endoscopy,gastroscopy,colonoscopy & rectoscopy. Hypoallergenic, does not irritate skin.Water soluble ,can be cleaned easily with tissues or a towel. It spreads easily and adheres well to rubber material and synthetic surfaces.It will notharm surgical instruments, rubber, or plastic, and is safe to use on human tissues. Models: 3g/5g/57g/113g available. Features: Non-irritating, Non-staining, Non-greasy. Water soluable,bacteriostatic. Not made with natural rubber,latex free. Gamma sterilized meets AAM/ANS/ISO11137 standard. Purposes: MEDISEA Sterile Lubricating Jelly is intended for medical purposes to lubricate body orifices to facilitate entry of diagnostic or therapeutic devices.It can be used in insertion of Catheters, insertion of Speculum, rectal thermometers, enemas / douches, gynecological examinations, insertion of tampons,digital& instrument examinations, lubrication of condoms and general hospital procedures. Storage:Store in cool dry place Expiry date:Two years.
Lubricants.
What's the introduction of micro oval gear flow meter Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter. Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of micro oval gear flow meter 1) anti-dust, anti-vibration, anti-corrosive&explosion-proof. 2) max accuracy up to 0.2% 3) min flow : 0.1ml/min 4) max temperature: 200c 5) max pressure: 1000bar 6) viscosity liquid:0.3~10000cps.
What's the introduction of micro oval gear flow meter Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter. Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of micro oval gear flow mete 1) anti-dust, anti-vibration, anti-corrosive&explosion-proof. 2) max accuracy up to 0.2% 3) min flow : 0.1ml/min 4) max temperature: 200c 5) max pressure: 1000bar 6) viscosity liquid:0.3~10000cps.
What's the introduction of micro oval gear flow mete Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter. Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of micro oval gear flow meter 1) anti-dust, anti-vibration, anti-corrosive&explosion-proof. 2) max accuracy up to 0.2% 3) min flow : 0.1ml/min 4) max temperature: 200c 5) max pressure: 1000bar 6) viscosity liquid:0.3~10000cps.
Lubricant oil, automotive oil, industrial oil, engine oil, motor oil.Manufacturer
This product is primarily used for blending cylinder oil for low speed marine engine with outside guide and high quality engine oil, especially environment-friendly internal combustion engine oil. The recommended dosage in oil is 2.0-4.0%. The product is packed in 200 liter metal drum (net weight: 170 kg/drum).
FB08G is a kind of bushes wrapped by bronze strip. The bronze is of particular formulation with high specific gravity and on its surface may be incorporated with spherical of diamond shaped indentations or oil grooves as required by customers. It is of high load capacity and long life. In place of traditional bronze bush, it is more cheap and more compact. It is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machine tools and some mineral engines. Base material: CuSn8P0.3 Hardness: HB90~120 Load capacity: 75N/mm2 Temperature: -80~200¡ãC Speed limit: 2.5m/s PV limit (Oil): 16N/mm2. m/s. Standard export package.
This series products are based on special high density homogenous copper alloy. The inner surface is rolled to diamond or half-ball shape lubrication grooves. They are in high density, good load capacity and wear-resistant. The products are widely used in machinery industry, such as auto machines, pumps, plastic injection machines, lifting equipments, mining machinery, construction machines, etc. Features: 1.Minim oil lubrication, able to be applied in water-lubrication environment 2.Good anti-abrasion, low friction coefficient 3.Working temperature range: -100oC~+200oC Specifications: Max. dynamic loading capacity : 40N/mm2 Max. static loading capacity : 120N/mm2 Max. linear speed : 2m/s Friction coefficient : 0.08~0.25 Hardness : HB110~150 Yieid Strength : 250N/mm2. Standard export package.
What's the introduction of Micro Oval Gear Flow Meter ? Micro Oval Gear Low Flow Meter is a kind of oval gear flow meter ,along to positive displacement flow meter. there is thousands of manufacturers who can produce oval gear flow meter. but only several manufacturer who have technology to produce micro liquid flow meter. Micro Oval Gear Flow Meter offer the highest accuracy and measure for various viscosity liquid. special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro Oval Gear Low Flow Meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, Adhesive control ,Hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of Micro Oval Gear Flow Meter? 1) Anti-dust,anti-vibration,anti-corrosive&explosion-proof. 2) Max accuracy up to 0.2% 3) Min flow : 0.1ml/min 4) Max temperature: 200C 5) Max pressure: 1000bar 6) Viscosity liquid:0.3~10000cps. Now We look forward to have cooperation with you!
What's the introduction of micro oval gear flow meter Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter. Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of micro oval gear flow meter 1) anti-dust, anti-vibration, anti-corrosive&explosion-proof. 2) max accuracy up to 0.2% 3) min flow : 0.1ml/min 4) max temperature: 200c 5) max pressure: 1000bar 6) viscosity liquid:0.3~10000cps.
What's the introduction of micro oval gear flow meter Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter. Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of micro oval gear flow meter 1) anti-dust, anti-vibration, anti-corrosive&explosion-proof. 2) max accuracy up to 0.2% 3) min flow : 0.1ml/min 4) max temperature: 200c 5) max pressure: 1000bar 6) viscosity liquid:0.3~10000cps.
