Find Verified Lubenz Hoxx Plus Hydraulic Oil Iso 46 68 Suppliers, Manufacturers and Wholesalers

LUBENZ HOXX PLUS HYDRAULIC OIL HVI ZF range of lubricants are high viscosity index Zinc Free Ashless anti-wear hydraulic
fluids formulated with high quality HVI base stocks and advanced very low ash anti-wear additive technology. They are designed
to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under
severe conditions. These oils are available in ISO viscosity grades from 15 to 150. Moreover, they are also designed to work in
systems where high hydrolytic stability is required, even in presence of high moisture content in hydraulic systems.

for more information, please contact us.

We are supplier and exporter of Hydraulic Oil.

Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.

Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.

Properly processed soybean meal offers the most complete nutrient profile of any common feedstock. Some of its most significant nutritious benefits include:

Protein
Soybean meal contains 47-49% protein and 3% crude fiber if the hulls are removed before processing. Processors often leave some hulls in tact or add separated hulls back into the material after processing to create a meal with about 43-46% protein and at least 6% crude fiber.

Monogastric (single-stomached) animals, like pigs and chickens, donâ??t digest dietary fibers very well, so they prefer low-fiber, high-protein feeds. Soybean meal offers the highest protein content of any common oilseed or grain, supplying the most complete source of plant-based protein.

Amino acids
Soybean meal provides all the essential amino acids that monogastric animals requireâ??especially those like lysine and tryptophan that are lacking in corn and other cereal grains. Plus, the amino acids in soybeans are highly digestible. Compared to other oilseed meals, soybean offers the highest lysine digestibility and ranks high in methionine, cystine, and threonine.

Energy
Soybean meal offers more metabolizable energy than any other plant protein, especially when processed in a mechanical press like the Anderson Expeller. The press leaves about 5% residual oil in the meal, which boosts fat-based energy in feed.

The nutrition facts for 100 grams of boiled soybeans are :
Calories: 172
Water: 63%
Protein: 18.2 grams
Carbs: 8.4 grams
Sugar: 3 grams
Fiber: 6 grams
Fat: 9 grams
Saturated: 1.3 grams
Monounsaturated: 1.98 grams
Polyunsaturated: 5.06 grams

Terms:
MOQ: 25,000 mt * 12 months
CIF USD 420 / mt
ITLC / SBLC / TT from a top 50 bank
Draft of the letter of credit to be approved by the Seller before issuance

White Oil Grades available Meeting requirements of BP, USP AND IP Standards are as below :-

1. WHITE MINERAL OIL INDUSTRIAL GRADES - TECH GRADES ( For use in Rubbers , PVC , Polymers , EPDM , Butyl Rubber )
Industrial Grades are used in polymer and plastic industries and are tailored with respect to boiling point distribution and viscosity characteristics. The characteristics of the oil impart good plasticization effect on the finished product while ensuring retention of oil within the polymer. It is non-toxic and environmentally friendly, and has good compatibility with rubber. It is particularly suitable for EPDM and butyl rubbers, Non-polar rubber such as natural rubber and thermoplastic rubber.
DANA WHITE OIL TECH 8
DANA WHITE OIL TECH 10
DANA WHITE OIL TECH 15
DANA WHITE OIL TECH 20
DANA WHITE OIL TECH 30 , 32
DANA WHITE OIL TECH 40 , 46
DANA WHITE OIL TECH 60 , 68, 70( HEAVY GRADE )
DANA WHITE OIL TECH 80 ( HEAVY GRADE )
2. WHITE MINERAL OIL - COSMETIC GRADE
White Mineral Oil Cosmetic Grade is colorless, transparent oil without any additives, water or mechanical impurities.It possesses excellent anti-oxidation, chemical and light stability. This product is suitable for cosmetic applications and for machine lubrication in food and textile industry.
DANA WHITE OIL COSMETIC 5
DANA WHITE OIL COSMETIC 8
DANA WHITE OIL COSMETIC 10
DANA WHITE OIL COSMETIC 15
DANA WHITE OIL COSMETIC 20 , 26
DANA WHITE OIL COSMETIC 30 , 32
DANA WHITE OIL COSMETIC 40 , 46
DANA WHITE OIL COSMETIC 60 , 68 , 70( HEAVY GRADE)
DANA WHITE OIL COSMETIC 80( HEAVY GRADE)

Volume
100 ml, 250 ml, 500 ml, 1 Ltr, 5 Ltr, 10 Ltr, 25 Ltr

One-Stop Customization -

Designing the shape, color, material, and labeling of the bottle to match the brand's style and image.The label on the bottle can be customized to include the brandâ??s logo, product information, and any other necessary information. Packaging can also be customized to match the brand's style and image.

The Trusted Brand in Quality-Approved Essential Oil Packaging Solutions

Experience a sourcing experience like no other with a globally-trusted essential oil packaging manufacturer, Jarsking. We offer a vast selection of essential oil packaging solutions made with the finest materials and specifically designed to preserve the efficacy of your essential oil formulations.

Jarsking's ISO-certified production facility practices a streamlined manufacturing process and strict quality control protocols to ensure you get the right essential oil packaging in the market. Plus, you can customize the design of your packaging and add your logo to make them more appealing to your growing audience.

Quick Benefits:
Make bespoke essential oil packaging that reflects your branding
Work within your budget for better profits
Bring your existing designs to retain your loyal customers
Improve efficacy and application suggestions of your essential oils

CONTEX Anti-wear Hydraulic Oil ISO 68 is high performance anti-wear hydraulic oil developed for high pressure hydraulic systems operating under moderate to severe conditions in motive and industrial service. The hydraulic oil is formulated from highly refined base stocks and carefully selected additives to provide outstanding anti-wear properties, excellent oxidation stability, superior demulsibility and corrosion protection. Recommended for use in hydraulic systems, chain drives compressors, mining machinery, machine tools, enclosed gear boxes (not requiring EP oils), circulating oiling systems etc

Gibson hydraulic ISO is manufactured from high VI paraffin base oil fortified with anti-wear corrosion oxidation and foam inhibitors to provide maximum protection for motor and hydraulic systems.

HYDRAULIC OIL HVI ZF 68 ISO 68 range of lubricants are high viscosity index anti-wear hydraulic fluids formulated with high quality HVI base stocks and advanced anti-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150.

LUBENZ PETRO Rock Drill oil series of lubricants are supreme performance Pneumatic Rock Drill & Tool oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in pneumatically operated rock drills in underground and surface mining operations. They offer optimum adhesiveness and emulsification with water to avoid adverse effects of rust and corrosion. Their excellent wear protection property helps in reducing component wear and maintains adequate lubrication film to carry high loads.

for more information, please contact us.

BASE OIL SN 100-150-300-500-600-700

Base oil is a type of oil which is used as a base for lubricants. The main element of lubricants (volume wise) is base oil and it forms about 95% of lubricants weight. In some lubricants (Compressor and hydraulic oil) 99% of the oil is consisted of base oil and only the 1% which is left contains additives. Base oils can be reached from oil based and non-oil based resources. Most of the base oils used in the world are obtained from crude oil refining. Most of the compounds which form base oils are Paraphinic, Naphthenic and aromatic compounds.

Base oils chemical properties and their impact on the usage of final lubricant:

1 volatility: reduction of the oil, oil thickening, sediments

2 surface activity: foaming, pressure tolerance, air release, emulsion expansion

3 oxidations: sediments, oil thickening, metal oxidation, mud forming

4 Viscosity: Fluidity in lower degrees, energy waste, abrasion protection, proper cooling

5 being soluble: Motor neatness, sealant compatibility, process applications, formulation sustainability The base oil which is extracted from crude oil is called mineral base oil which is categorized in two types (Paraphinic and Naphtshic). Paraphinic oils are consisted of normal hydrocarbons and Iso hydrocarbons. Naphthic oils are consisted of annular full hydrocarbons. Paraphinic oils have certain attributes in comparison with naphthic oils such as;

HYDRAULIC OIL HVI ZF 46 ISO 46 range of lubricants are high viscosity index anti-wear hydraulic fluids formulated with high quality HVI base stocks and advanced anti-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150.

Item No .: 2080 - 68

Size : 36 - 47 (5-13)

Soles : 2080 Dual Density PU

SAFETY FEATURES
Steel Toe Cap
Oil Resistant
Shock Absorber
Anti Static Insole
Anti Skid

ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Shoe

Standard : S1

Sizes : 36-47 (5-13)

Colors : D Grey

AVAILABLE OPTIONS
Product Number : 2080-68

Standard : S1, S1P, S2, S3

Toe : Steel

Midsole : Steel

Sole : Dual Or Mono

Color : D Grey / Blue / Tan

MATERIALS
Upper : Water Repellant Nubuck, Suede and Breathable Textile

Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant

Toe : Steel

Footbed / Socks : Padded Antistatic

Sole : 2080 Dual Density PU

Certified : EN ISO 20345: 2011

BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.

* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.

* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.

* The shoe should be used for the purpose for which it has been designed.

Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.

* The body temperature is regulated through your feet

* Maximum number of nerves go through your feet.

100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.

* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.

* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.

* Cushioned Insoles providing better comfort.

* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.

* Light Weight PU for a featherlite feel even during high stress working conditions.

Item No.: 3002-68

Size : 36 - 47 (5-13)

Moq : N/A

Soles : 3002 Dual Density PU

SAFETY FEATURES
Anti Skid
Anti Static Insole
Heat Resistant Sole
Oil Resistant
Shock Absorber
Steel Toe Cap

ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Boot

Standard : S1

Sizes : 36 - 47 (5-13)

Colors : Blue

AVAILABLE OPTIONS
Product Number : 3002-68

Standard : S1, S1P, S2, S3

Toe : Steel / Composite

Midsole : Steel / Metal Free

Sole : Dual or Mono

Color : As per pic

MATERIALS
Upper : Water Reppellant Nubuck, Suede and Helcore

Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant

Toe : Steel

Midsole : Steel

Footbed / Socks : Moulded Cambrella and EVA. Antistatic

SOLE: 3002 Dual Density PU

Certified : EN ISO 20345: 2011

BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.

* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.

* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.

* The shoe should be used for the purpose for which it has been designed.

Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.

* The body temperature is regulated through your feet

* Maximum number of nerves go through your feet.

100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.

* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.

* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.

* Cushioned Insoles providing better comfort.

* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.

* Light Weight PU for a featherlite feel even during high stress working conditions.

Item No.: 2058-11

Size : 39 - 46 (5-12)

Soles : 2058 Mono Density PU

SAFETY FEATURES
Abrasion Resistant
Acid Resistant
Anti Static Insole
Excellent Shock Absorber
Fine Leather
Light Weight
Oil Resistant
Slip Resistant Sole
Steel Toe Cap
Water Proof

ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Shoe

Standard : S2

Sizes : 39 - 46 (5-12)

Colors : Black

AVAILABLE OPTIONS
Product Number : 2058-11

Standard : S1, S1P, S2, S3

Toe : Steel

Midsole : Steel

Sole : Mono

Color : Black / Brown

MATERIALS
Upper : Water Resistant Smooth Haircell

Lining : Soft Buff Leather

Toe : Steel

Midsole : Steel

Footbed / Socks : Cambrella and EVA. Antistatic

Sole : 2058 Mono Density PU

Certified : EN ISO 20345:2011

BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.

* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.

* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.

* The shoe should be used for the purpose for which it has been designed.

Some facts about feet
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.

* The body temperature is regulated through your feet

* Maximum number of nerves go through your feet.

100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.

* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.

* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.

* Cushioned Insoles providing better comfort.

* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.

* Light Weight PU for a featherlite feel even during high stress working conditions.

Item No .: 3002 - 46

SIZE : 36 - 47 (5-13)

Moq : N/A

Soles : 3002 Dual Density PU

SAFETY FEATURES
Anti Skid
Anti Static Insole
Oil Resistant
Shock Absorber
Steel Midsole
Steel Toe Cap
Water Proof

ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Boot

Standard : S3

Sizes : 36 - 47 (5-13)

AVAILABLE OPTIONS
Product Number : 3002 - 46

Standard : S1, S1P, S2, S3

Toe : Steel / Composite

Midsole : Steel / Metal Free

Sole : Dual or Mono

Color : Black / Brown

MATERIALS
Upper : Water Resistant Printed Leather and Synthetic

Lining : CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Antibacterial

Toe : Steel

Midsole : Steel

Footbed / Socks : Cambrella and EVA. Antistatic

Sole : 3002 Dual Density

Certified : EN ISO 20345:2011

BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.

* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.

* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.

* The shoe should be used for the purpose for which it has been designed.

Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.

* The body temperature is regulated through your feet

* Maximum number of nerves go through your feet.

100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.

* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.

* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.

* Cushioned Insoles providing better comfort.

* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.

* Light Weight PU for a featherlite feel even during high stress working conditions.

Item No.: 2066-43

Size : 39 - 46 (5-12)

Moq : N/A

Soles : 2066 Mono Density

SAFETY FEATURES
Anti Skid
Anti Static Insole
Oil Resistant
Shock Absorber
Steel Midsole
Steel Toe Cap
Water Proof

ADDITIONAL PRODUCT INFO
OVERVIEW
Product Name : Safety Boot

Standard : S3

Sizes : 39 - 46 (5-12)

Colors : Black / Brown

AVAILABLE OPTIONS
Product Number : 2066-43

Standard : S1, S1P, S2, S3

Toe : Steel

Midsole : Steel

Sole : Mono

Color : Black / Brown

MATERIALS
Upper : Water Resistant Printed Leather and Synthetic

Lining : CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Antibacterial

Toe : Steel

Midsole : Steel

Footbed / Socks : Cambrella and EVA. Antistatic

Sole : 2066 Mono Density

Certified : EN ISO 20345:2011

BOOT CARE
* Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents.

* When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage.

* To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort.

* The shoe should be used for the purpose for which it has been designed.

Some facts about feet-
* Most of the muscles are in your feet. Thus you should wear comfortable shoes.

* The body temperature is regulated through your feet

* Maximum number of nerves go through your feet.

100% COMFORT GUARANTEED
* Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free.

* Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort.

* Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort.

* Cushioned Insoles providing better comfort.

* Shock absorbing PU midsole with low density providing uniform cushioning and comfort.

* Light Weight PU for a featherlite feel even during high stress working conditions.

Hydraulic Oil is a premium quality heavy duty lubricant formulated with highly refined base stocks and a wellbalanced package of advanced anti corrosion antioxidant and antifoam additives The product is available in different ISO VG viscosity grades to suit the ambient operating temperature requirements

Application
AG AUTO Hydraulic Oil is formulated for use in high pressure hydraulic systems in all mobile and stationary equipment operating under severe working conditions It is also used for circulation systems compressor pump bearing and gear lubrication where recommended

Meets and Exceeds
DIN 51524 Part 3 HVLP
Vickers I286
Denison HF2
ISO 11158 HV
Cincinnati P70
Advantages
Extended oil life
Outstanding thermal and hydraulic stability
Excellent demulsibility and good shear stability
Exceptional resistance to oxidation and foaming
Highly effective control over wear corrosion and rust
Low pour point ensure good fluidity in cold climates
Improved fiction characteristics resulting in lower running temperatures

We are supplier and exporter of Hydraulic Oil.

Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.

Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.

Heavy Alkyl Benzene (HAB) is a byproduct in the process of linear alkyl benzene (LAB) production. The potential of the usage of HAB in the formulation of gasoline and diesel engine oils as well as hydraulic fluid is indicated. With the aim of passing 5W30, 5W40, 10W40, and 15W40 standards, different engine oils have been formulated. The formulations contain various amounts of HAB as minor component, and miscellaneous quantities of solvent neutral 100 (SN-100), SN-150, and SN-650 as major component. The measurement of typical properties of obtained oils indicates that some of them do have the intended criteria. Test field of the recent oils designate that they have good performance. In the next step, different blends of HAB as major component and polyisobutene (PIB) as minor component have successfully been employed in the formulation of several ISO grade hydraulic fluids. The achieved materials do have suitable air release and demulsibility. HAB is also used as a key ingredient in laundry detergents, dishwashing liquids, and other cleaning products. The advantages of using HAB in the production of detergents and surfactants include its excellent cleaning properties, compatibility with different formulations, and biodegradability. HAB is also an environmentally friendly alternative to other surfactants, such as linear alkylbenzene sulfonate (LAS), which is less biodegradable and more toxic to aquatic life.