Taa low carbon bainite steel shot is a newly developed product after decade long efforts of taa technician group. This low carbon bainite steel shot has longer life and is competitively priced than martensite steel shot. Compared with the common low carbon steel shot from germany, taa low carbon bainite steel shot not only has good ductility, but also successfully overcome the low hardness weakness.
Taa lcb abrasive could be applied to all the fields relating to shot blasting, sand blasting, blasting peening, etc, and its excellent performance could help end users greatly improve efficiency and save 50% of shot blasting cost.
Steel shot
ZW Steel Shot has highly praised and well appreciated by domestic end-user and distributor customers for good quality, competitive prices and good after-sale services.ZW steel shot production process with advanced technical equipment,perfectly controlled heat treatments provide it with optimum resilience and resistance to fatigue.
The application of steel shot
SAE Application
S-780
S-660 Blasting,cleaning or descaling middle, heavy and super-heavy cast iron, cast steel, steel plates,iron pipe, forged piece and heat treatment piece.etc.
S-550
S-460 Shot blasting, descaling, shot peening and shaping of medium-to-large cast iron, steel structure, forged piece, heat treatment piece, steel plate and steel pipe,etc.
S-390
S-330 Blasting, descaling, shot peening and shaping of small-to-medium cast iron, ductile iron, cast parts, heat treatment piece, steel plate, steel sections, steel pipe, structural parts, chain and non-ferrous metals,etc.
S-280 Blasting,descaling,polishing small cast iron, cast part, heat treatment piece, aluminum, steel plate and cast copper alloy before gold-plating process to increase elasticity and toughness.
S-230
S-170
S-110 Shot peening,blast cleaning and polishing stainless steel plate, thin steel plate and non-ferrous metals before painting process to increase elasticity and toughness.
The sieve analysis of steel shot
2.5 2.0 1.7 1.4 1.2 1.0 0.8 0.6 0.5 0.3
7 2.80 all pass
8 2.36 all pass
10 2.00 85%min all pass all pass
12 1.70 97%min 85%min 5%max all pass
14 1.40 97%min 85%min 5%max all pass
16 1.18 97%min 85%min 5%max all pass
18 1.00 96%min 85%min 5%max all pass
20 0.850 96%min 85%min 10%max all pass
25 0.710 96%min 85%min 10%max
30 0.600 96%min 85%min all pass
35 0.500 97%min 85%min 10%max
40 0.425 97%min
45 0.355 80%min
50 0.300 90%min
80 0.180
120 0.125
SAE S-780 S-660 S-550 S-460 S-390 S-330 S-280 S-230 S-170 S-110
Low carbon steel shot---our patent product
Ideal for use to provide a clean, polished metal surface.
Used in both turbine and compressed air blasting systems. Low carbon steel shots ensure lower turbine blades wear.
Low carbon steel shots' life cycle is about 30%-50% longer than common steel shots. Shot blasting process produces less dust, which results in lower maintenance costs of filtration system.
Product Feature:
a. High strengthen, high tenacity, long service life.
b. Low breakage, low dust, low pollution.
c. Low wear of the equipment, long life of accessory.
d. Reduce dedusting system load, lengthen usage time of dedusting equipment.
Shot Peening : Steel shots are used in shot peening, which is used to make stronger and reduce stress in machinery like turbines, steel automobile crankshafts, springs, gears, torsion bars, shafts and connecting rods.
Surface Preparation: Steel shots are used in support of coatings, such as powder coating, enameling, painting, metallization, rubber bonding and moreâ?¦
Sand Removal: Steel shots can be used in cleaning of castings.
Scale Removal: Steel shots can also be used to clean ferrous or non-ferrous alloys or products (pipes, plates etc.) that are made from forging, die-forging, stamping, drawing and rolling or after heat treatment.
Shot Blasting of Cast Steel: Steel shots can be used on the blasting of profile steel,shipboard,steel board and other steel material
Roughening and de-burring: Steel shots are used in the aesthetic treatment of some material. It is also used to remove the burrs that might arise during injection moulding of metallic products.
Product Feature:
Taa Metal Blast Abrasive Low Carbon Steel Shot Ball S460
a. High strengthen, high tenacity, long service life.
b. Low breakage, low dust, low pollution.
c. Low wear of the equipment, long life of accessory.
d. Reduce dedusting system load, lengthen usage time of dedusting equipment.
Product Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Shot blasting: Shot blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure before painting or coating.
20637 Low Carbon Bainite Steel Shot Suppliers
Short on time? Let Low Carbon Bainite Steel Shot sellers contact you.
Stainless steel cut wire shot with a bright surface that is used for shot blasting, shot peering and deburring in non-ferrous metal and stainless steel products surface. The surface of work-pieces are smooth, no rust and highlight metallic luster after process.
Steel Grit is manufactured from high carbon steel shot which is crushed to angular shape by special roll mill and subsequently tempered to different hardness grades (GH, GL & GP) for different blasting applications. Finally, each hardness grades are screened to different abrasive mixes.
Sharp Angular shape and relative hardness of Steel Grit leads to high cleaning rates and recyclability hence, it is an excellent abrasive for blasting operation in closed environment such as blast room and open blasting. Industry application of steel grit as blasting media includes descaling of steel structures, granite cutting, and surface roughness before blasting and painting.� Steel Grit can be recycling a number of times.
Product Application:
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Shot blasting: Shot blasting of profile steel, shipboard, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure before painting or coating.
Garnet is a natural product with chemically inert, non-toxic metals and crystalline silica. With its good hardness, garnet has been used as a gemstone and blasting abrasives.
Features:
Low Dust: The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area.
Excellent Surface Quality: It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not adversely dimples and pits, easy access to 50-70 microns surface roughness.
Recyclable: Its excellent tenacity and lower brittleness can lower damage rates and higher productivity. Depending on the specific application, it can be reused up to 3 times.
Lower Production Costs: The paintâ??s adhesion and corrosion resistance depending on the cleanliness and surface roughness of the base material. Using garnet abrasive can greatly save the amount of paint by completely eliminate adverse spurs and pits.
Improve Health and Safety: Its non-toxic characteristics can greatly reducing silicosis, leaching of metals or radioactive contamination risks.
Application:
1. Blasting abrasives: Derusting of steel structure, hull, Bridges;
2. Water jet cutting: Cutting metal, stone, glass;
3. Grinding media: Grinding marble, optical lens, glass, leather and other materials;
4. Filter medium of chemical, petroleum, pharmacy, water treatment;
5. Coated abrasives of grinding wheel, emery cloth, sandpaper;
6. Wear-resistant materials: Used in highway pavement, airport runway, prevent slippery, wear-resisting rubber paint.
Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This highcarbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future. Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dust a testament to our unwavering dedication to environmental responsibility and innovation
Carbon Dust is a high-quality powder with a purity of 100%. It is designed in a powder form, making it easy to use and handle. The product does not float, ensuring easy application and minimal waste. The fine powder appearance makes it suitable for various industrial and commercial applications. As a trusted supplier and trader, we ensure that Carbon Dust meets the highest standards of quality and consistency, making it a reliable choice for your specific needs. Whether its for environmental remediation, filtration, or any other application, our Carbon Dust is the ideal solution for your requirements.
Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our
premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This high carbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future.Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dustâ??a testament to our unwavering dedication to environmental responsibility and innovation
Special Use: Cold Heading Steel
Wire Gauge: 1.8mm-5.5mm
Application: Construction
Alloy Or Not: Is Alloy
Type: Galvanized
Place of Origin: India and China
Special Use: Cold Heading Steel
Material: 45# /60#/70# High Carbon Steel
Model Number: 45# - 70#
Standard: AISI,ASTM,BS,DIN,GB,JIS
Application: Construction
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
We offer a wide plethora of Zinc in many forms including LME registered
and non registered Special High Grade Ingots and Jumbos, cathodes,
dust, foil, granules, powder, pieces, anodize activated powder, shot,
and a mossy form.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
20637 Low Carbon Bainite Steel Shot Suppliers
Short on time? Let Low Carbon Bainite Steel Shot sellers contact you.
