1.Description of liquid silicone rubber C830 Silicone rubber is condensation cure silicone rubber for mold making. The silicone rubber will be cured under room temperature, It’s two-components, the mixing ratio is 100:2 . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability. C-830 tin cure mold silicone has a good property , it is suitable for various mold making . 2.Characteristics of liquid silicone rubber *An exceptional fluidity and good operability, easy to demold *Good tensile strength and tear strength *lower shrinkage *non-deformation ,non-oily *good flexibility *eco-friendly *long shelf-time &lifetime 3.Application of liquid silicone rubber stone mold ,concrete mold , cement casting mold polyurethane casting mold , GRC casting mold , fiberglass cating mold statue mold , sculpture mold , resin craft mold ,artificial wooden mold gypsum mold , plaster mold ,bronze casting mold candle mold ,soap mold, shoe mold , tyre mold ,etc ..... C830 Silicone rubber is mainly suitable middle sized product and big size with simple pattern. Package: 1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum based on vacuum packing. Shelf life and transportation 1. Twelve(12) months when stored at 25C in tightly closed original packages. 2. This kind of product is non-dangerous product, which could be transported as general chemicals.
1. Description of rtv 2 liquid silicone rubber for frame gypsum molds C830 silicone rubber is condensation cure silicone rubber (tin cure silicone rubber) for mold making. The silicone rubber will be cured under room temperature. It's two components, the mixing ratio is 100:2. Part A is a flowable liquid silicone, part B is the catalyst. It has an exceptional fluidity and good operability. 2. Characteristics of rtv 2 liquid silicone rubber for frame gypsum molds * An exceptional fluidity and good operability, easy to demold * Good tensile strength and tear strength * Suitable hardness * Copy detailed pattern * Good flexibility * Eco-friendly * Long shelf-time &lifetime 3. Application of rtv 2 liquid silicone rubber for frame gypsum mold C830 liquid silicone rubber is perfect molding material, it is suitable to make mold for concrete casting, artificial stone, brick, cement casting, gypsum decorations, plastic product, resin craft, polyester, polyurethane, bronze casting, statues, jewelry, wax, crystal, tire mold, shoe mold, clay casting, ceramic casting. etc. C830 liquid silicone rubber is mainly suitable for small or middle sized products with delicate pattern by pouring and brushing operation. Package 1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum. Shelf life and transportation 1. Twelve(12) months when stored at 25C in tightly closed original packages. 2. This kind of product is non-dangerous product, which could be transported as general chemicals.
1.Description of Platinum liquid silicone rubber for mold making G830 Silicone rubber platinum cure silicone rubber. The silicone rubber will be cured under room temperature and can be cured fast by heating, It’s two-components liquid silicone rubber , the mixing ratio is 1:1 . It has an exceptional fluidity and good operability.Especially ,the platinum cure silicone rubber has a lower shrinkage,higher temperature resistance and it is flexible. 2.Characteristics of Platinum liquid silicone rubber for mold making *An exceptional fluidity and good operability *Good tensile strength and tear strength *Food grade silicone rubber *high temperature resistance *good flexibility *No smell ,non-toxic *long shelf-time &lifetime *Lower shrinkage 3.Application of Platinum liquid silicone rubber for mold making G830 silicone rubber is flexible silicone rubber ,it has a higher temperature resistance and lower shrinkage, so it is suitable to make the silicone gasket for machine sealing . 4.Datesheet of Platinum liquid silicone rubber for mold making Item No. Appearance Hardness (shore A°) Viscosity (CPS) Tensile-strength( kgf /cm2 ) Tear-strength (kgf /cm2 ) Elongation-break(%) Mixing ratio operation time (25? ) Curing time( 25 ?) shrinkage G830 translucent 30±2 7000±1000 =55 =24 =450 1:1 20-30 mins 2~3 h =0.1% Packing: 20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B 25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B 200KG/drum packing for part A +200KG/drum packing for part B
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. Non-toxic, odorless, two-component liquid silicone rubber, are two-component materials.Resistance high temperature of 250, shrinkage rate lower than 0.1%.
Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, 2. Silicon rubber for mold making is applicable for large statue buddha, relieve , furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50aafter curing with features (1) high tensile & tear strength (2) high duplication times (3) low linear shrinkage (4) resistance to high-temperature (5) low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: brushing cast & perfusion molding operation Shelf life for silicon rubber for mold making 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum 25kg/drum
Liquid silicone rubber for gypsum applications 1. Liquid silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board , and all kinds of gypsum decorations . Liquid silicone rubber for gypsum features Liquid silicone rubber is two part silicone with general hardness of 22-50a¡ãafter curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) low linear shrinkage (4) resistance to high-temperature (5) low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Liquid silicone rubber for gypsum operation instructions Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 3¡ª5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original gypsum mold slowly . Shelf life for liquid silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for liquid silicone rubber 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum 25kg/drum
Mold Making Silicone Rubber Applications: 1. Mold making silicone rubber can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, 2. Mold making silicone rubber is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Mold making silicone rubber is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Mold Making Silicone Rubber features: Mold making silicone rubber is white flowing liquid with general hardness of 22-50 after curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) Low linear shrinkage (4) resistance to high-temperature (5) Low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Mold Making Silicone Rubber operation instructions Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: The time for vacuum-pumping should be less than 3¡a5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step Three: Brushing cast & Perfusion Molding operation Shelf life for Mold Making Silicone Rubber: 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for Mold Making Silicone Rubber: 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
Description of platinum cured silicone rubber Platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .Its mainly suitable for tire molds making . Advantage of platinum cure silicone rubber for tire mold 1)non- shrinkage 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 4)high temperature resistant in 250 centigrade Operation instruction of platinum cure silicone rubber for tire mold Step one: take 100g of part a and 100g of part b and mix in 1:1 and mix the two part evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 35 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part a+ 20kg/drum for part b in one set , 200 kg/drum for part a+ 200kg/drum for part b in one set Iso.Ul, rohs
(3) low linear shrinkage (4) resistance to high-temperature (5) low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Liquid silicone rubber for gypsum operation instructions Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original gypsum mold slowly . Shelf life for liquid silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for liquid silicone rubber 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum 25kg/drum and 200kg/drum
Description of platinum cured silicone rubber Platinum cure silicone rubber is a kind of fda grade silicone , generally named two-components silicone rubber with translucent appearance, part a and part b mixing in 1:1 .It¡¯s suitable for molds making application. Applications of platinum cure silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, pu molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making Advantage of platinum cure silicone rubber 1)non- shrinkage (less than 0.1% 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 4)high temperature resistant in 250 centigrade Operation instruction of platinum cure silicone rubber Step one: take 100g of part a and 100g of part b and mix in 1:1 and mix the two part evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 3¡ª5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 810months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part a+ 20kg/drum for part b in one set , 200 kg/drum for part a+ 200kg/drum for part b in one set 25kg/drum
Pad printing silicon rubber features: 1)High print times 2)Abrasion resistance. 3)Good printing effects 4)Permanent and durable Pad printing silicon rubber operation instructions: . Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 35 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the vacuumed mixture into the original mold slowly, Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kgs/drum vacuumed packing 25kg/drum
Features of silicone rubber for making molds: 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High temperature resistance, acid and alkali-resistance and ageing resistance Operations of silicone rubber for making molds: Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly. Notes: Moulding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What is more, the finished moulds will meet a short life. All of these will cause a waste of silicon rubber. Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available Step Two: vacuum pumping Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available Step Three: Perfusion Molding The perfusion molding is an easy way to make molds, it is Slowly and evenly perfuse the mixed silicon rubber into the square frame 25kg per drum.200kg per drum
Liquid silicone rubberSpecifications mold liquid silicone rubber 1.favorable hardness 2.less than 2% shrinkage 3.catalyst: odorless Liquid silicone rubber Application: 1.Unsaturated polyester resins, epoxy resins, polyurethane resins. 2.Polyurethane elastomers. 3.Natural and synthetic waxes. 4.Plasters and cements. 5.Low-melting point 6.Imitation wood .....to be continued Liquid silicone rubber Mainly features: 1. Advantages - High fluidity 2. Shelf life:1.5 year 3. Excellent reproduction of details 4. we promise non-oily 5. Low linear shrinkage 6. catalyst: environmental,non smell 7. Good release properties with organic resins and gypsum Liquid silicone rubber Storage and precautions The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration. 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
RTV 2 Liquid Silicone Rubber is a type of Room Temperature Vulcanization Silicone rubber, contains two parts, Part A is silicone rubber, and Part B is cure agent / catalyst, when the part A and part B mix evenly at the ratio of 100:2, the silicone rubber will be cured. RTV 2 Liquid Silicone Rubber can be used for all types of products molds making, such as : Gypsum / plaster. Cement, Artificail Stone, GRC, GFRC, GRC,Tires ,PU ,Resin ,Soap ,Candle etc, for all size from small to few meters .
RTV 2 ( Tin Cured ) Silicone Rubber RTV 2 Liquid Silicone Rubber is a type of Room Temperature Vulcanization Silicone rubber, contains two parts, Part A is silicone rubber, and Part B is cure agent / catalyst, when the part A and part B mix evenly at the ratio of 100:2, the silicone rubber will be cured. RTV 2 Liquid Silicone Rubber can be used for all types of products molds making, such as : Gypsum / plaster. Cement, Artificail Stone, GRC, GFRC, GRC,Tires ,PU ,Resin ,Soap ,Candle etc, for all size from small to few meters .
Food Grade Silicone Rubber Description Food grade silicone rubber It have FDA Certificate and excellent for high-detail cake molds and complex design. Also it very suitable for making ice trays molds , baking molds,casting butter and other application you can image to produce foods.. Food Grade Silicone Rubber Specification 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
RTV Silicone Rubber Advantages: light viscosity, pourable effort, good fluidity, easy-operation, good tension and high tear strength. Description RTV Silicone Rubber: Mould making silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. RTV Silicone Rubber data sheet: 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
Rtv 2 silicone rubber applications: 1. Rtv silicone rubber can used for artificial limbs products such as Duplicating for somebody¡¡¥s hands, fingers, feet, other human organs, making movie Special efforts or orthotic making and orthopedic applications etc Step three: pouring the mixture into the frame with original gypsum mold slowly . Shelf life for rtv 2 silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25. 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum
BrandModel Mixing RatioColorHardness (shoreA) Viscosity (mPa.s)Working TimeCuring TimeTear-Strength (kN/m 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
Pad printing silicon rubber usages: Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass , electroplating toys and trade makers and so on . Pad printing silicon rubber description Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface. . Pad printing silicon rubber features: 3) Good printing effects 4) Permanent and durable Pad printing silicon rubber operation instructions: . Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. 25kg/drum and 200kg/drum
