Find Verified Light Vertical Multistage Centrifugal Pump Suppliers, Manufacturers and Wholesalers

CDL/CDLF is a versatile product that can transport a variety of different media from tap water to industrial liquids, adapted to different temperature, flow and pressure ranges, CDL is suitable for non-corrosive liquids, CDLF is suitable for slightly corrosive liquids. CDL type light vertical multistage centrifugal pump application field Water supply: water plant filtration and transportation, water plant zoning water supply, supercharging, supercharging of high-rise buildings. Industrial pressurization: process water system, cleaning system, high pressure flushing system, fire protection system. Industrial liquid transport: cooling and air-conditioning systems, boiler feedwater and condensing systems, machine tools, acids and alkalis. Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator, swimming pool. Irrigation: field irrigation, spray irrigation, drip irrigation. CDL type light vertical multistage centrifugal pump operating conditions 1, thin, clean, non-flammable and explosive liquid that does not contain solid particles or fibers. 2, conveying liquid temperature: room temperature type -15 to +70 3, hot water type +70 to +120 4, ambient temperature: high +40 5. Altitude: 1000m high

VERTICAL MULTISTAGE CENTRIFUGAL PUMPS CDL(F)Series is a Sheet metal Stainless Steel Vertical Multistage Centrifugal Pump offered by Huayang. The pumps are driven by standard electrical phase mounted motor. CDL(F) Series pumps are available in complete SS 304 & complete SS 316 material. Pumps are available in I Phase as well as III Phase. Application CDL(F) Series has multifunctional products and can be used to transfer various medium from tap water to industrial liquids at different flow rates & pressure. Main applications include clear liquid transfer water treatment projects to reverse osmosis systems, Pressure boosting systems, High pressure water unit, Fire fighting systems; Boiler feed applications, Spray irrigation etc.

Product introduction: KDL series vertical multistage centrifugal pump is a new development of a new generation of multistage pump products, its excellent water properties and structure ensures that the user can effectively reduce the operation cost of pump in a variety of applications. Product features: This type of pump belongs to a multistage centrifugal pump, vertical section, closed impeller. It has the advantages of compact structure, light weight, small occupation area, low noise and vibration, high reliability. Pump shape by the national patent (ZL023728434) protection. Technical parameters: Lift:7.5-360m Flow1.8-350m/h Field of application: For pumping water and impurities without solid particles in the liquid, can be applied in water or water, liquid pressure device, circulation and cooling system, fire stations, refineries, irrigation, high pressure water station, building water supply etc..

Product introduction: VMP type a multistage centrifugal pump, may transport the temperature does not exceed 80 â?? freshwater and seawater. Product features: The structure is compact and reasonable, the installation covers an area of small, light weight, stable operation, easy maintenance, can prevent leakage of liquid to be delivered by a specially designed mechanical seal. The lift of the pump with the series increases in direct proportion to increase, and the corresponding flow will not change. Technical parameters: Lift5-173.2m Flow4-30m/h Field of application: Suitable for fire protection, refrigeration system, industry, agriculture, building water, deep well water, fresh water and sea transport

Flow: 25m3/h Head: 78m Power: 9.2kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.

Flow: 25m3/h Head: 78m Power: 9.2kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.

Flow: 10m3/h Head: 165m Power: 11kw Material: cast iron Medium: clean water Outlet dia: 32mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.

Design Features: Vertical, Centrifugal, Monoblock (unibuilt) type pump fitted with single stage closed Impeller in Volute Casing having In-Line suction & delivery. Can be made available in Close-Coupled design also. Custom-built Design: Pumps with variable supply voltage / frequency and different material of construction can be offered on request.

Product introduction: Type D is a single suction multistage centrifugal pump, conveying not higher than 80 â?? water and physical and chemical properties similar to liquid water Product features: The lift of the pump with the series increases in direct proportion to increase, and the corresponding flow will not change Technical parameters:

INSTALLATIONS AND USE .For water supply system .For clean non -explosive liquids, without solids, filamentary or abrasive matter and non -aggressive to the pump materials .A universal pump for civil and industrial use, for pressure boosting systems, fire-fighting systems, high-pressure washing...

Definition of Model IVM 10-5 IVM - Vertical Multistage Stainless Steel Pump 10 - design capacity (m3/h) 5 - Stage Number

Applications ã?? ã?? Reverse Osmosis System Boiler feed water Fire protection system Booster & Pressurization Set Irrigation & Municipal Water supply

Immersion type multistage centrifugal pump Applications : High rise buildings Lathe Grinding machines Processing centers Cooling devices Industrial cleaning equipment Filtering system Description : These pumps are compact, highly reliable, low maintenance and easy to install. This immersion multistage pump has Flow Range (Q) 0.4-55.0 M3/hr and Liquid Temperature -15C - +120C.

Solar mobile light towers, solar systems, solar all in one lights, solar street lights, solar on grid system pics, solar off grid systems container offices, solar acs solar semi integrated street lights, solar fully integrated street lights, solar integrated roofing for offices/workshops/stockyards, solar water pumps, solar traffic blinkers and solar rope lights.

Product Overview: DP Pump is a self Cbalancing multilevel boiler feed pump with single-suction, multievel and sectional structure. This series of pumps are suitbalbe for medium and low pressure boiler water feeding, and high-pressure boiler water feeding for thermal power plant, as well as high-lift water supply and drainage of factories and cities. They are used in transferring water or other liquid with similar physical and chemical properties to water. Temperature of media being transferred can vary from -20~160 Efficient energy-saving: Using advanced hydraulic model, independent R&D energy efficient products. Good centering of impeller and guid vane channel and efficiency will not significantly drop as balancing disc wears and rotor components move forward. No leakage of balancing water reduces loss of volume and improves pump efficincy and pump efficiency is on average 2-5% higher than normal DG pump. New structure: With symmetrically arranged impeller rotor components, axial forces generated by all levels of symmetrical impellers forces offset each other and automatic balancing of huge axial thrust within pump cavity can be realized without the balcancing disc structure. New technology: Unique throttling and pressure reduction devices, odd-lecel balancing device. High reliability: By canceling easy-failing balancing disc, pump reliability is greatly improved, maintenance frequency and maintenance cost are reduced. Low maintenance cost and long life time By adopting precision casting and unique throttling and pressure reducing devices for auxiliary support, pump vibration and noise are greatly reduced and service life is prolonged.

Contact Shijiazhuang Ruite Pump Co., Ltd Add:Majuan Village, Nandong Town, Shijiazhuang, Hebei, China (Mainland) Tel:dsales3(at)ruitepump.com Fax:86-0311-89916995 Contact:Hillary Mob:18332439492

Heavy duty submerged slurry pumps are vertical, shaft driven centrifugal slurry pumps designed for transferring abrasive and high density slurries from sumps, pits and other submersible source. The position of the shaft of the vertical slurry pump is perpendicular to the horizontal plane, the pump end is under the water and the motor above the liquid level. Features -The rotor parts can be adjusted axially and supported by multiple points, so heavy duty cantilever sump pump can operate steadily and reliably. -The pump adopts a long shaft structure and can be inserted up to 10 meters deep. Shaft coupling is safe and reliable. Convenient disassembly. -The impeller is immersed in the medium when the pump starts, so it is easy to start, and there is no air exhaust problem. -The outlet flange is a half movable flange for easy connection. Series SP(R) slurry pump is centrifugal vertical sump pump, work under fluid. It widely used for delivery abrasive, high density slurry with large particle in the metallurgy, mine, power plant, chemical, and other industry. Shijiazhuang Jiemu Machinery Equipment Co.,Ltd is one of the leading private indenting firms of China having 15 years of experience in Mining, Fluid Transportation and Fire Emergency Field. It works on design theory of slurry pump and water pump, experimental researches of pump performance wear mechanism and new products developing, and involves in research, design, manufacturing and sales.