Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
Product Name Self-contained positive pressure air breathing apparatus with Electronic pressure gauge Material - Alloy steel Color - Black and White Standard - EN 136 Cylinder volume - 6L Working hours - 55-60mins Working pressure - 30Mpa Used - Firefighting
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Solubility : 98%min PH Value : 4.5~6.5 Arsenic (mg/kg) : 0.5 Lead (mg/kg) : 0.5 Packing : 25kg/bag Shelf life : 2 years
5-Hour Energy (Pack of 12 Shots) Zero sugar and herbal stimulants, only four calories, 5 hours of energy with no crash Contains as much caffeine as a cup of the leading premium coffee Takes just seconds to drink, light and portable, and no refrigeration required Packed with B vitamins, amino acids and other nutrients, and non-carbonated Package: * 24 pcs/ carton * 2377 cartons/ cont 20 FT
Flavors Berry Lemon Lime Orange Pink Lemonade Pomegranate Grape *Size: 1.93 FL OZ (57 mL) per bottle. *Packed with Vitamins, Amino Acids, Nutrients. *Sugar-Free. *4 Calories per serving. *Contains as much caffeine as a cup of the leading premium coffee. Zero sugar and herbal stimulants, only four calories, 5 hours of energy with no crash Packed with B vitamins, amino acids and other nutrients, and non-carbonated *Takes just seconds to drink, light and portable, and no refrigeration required.
Skim Milk Powder is produced from pasteurized full-fat cow's milk, by spray drying Immediate packaging is approved for direct food packaging in accordance with Regulation (EC) 1935/2004 Energy value 1491kJ / 351kcal, protein 34g, carbohydrates 51g, fat 1.25g - Contents of metals - Lead (Pb) - max 0,1 mg/kg - Aflatoksin M1 - max 0,050 µg/kg - Antibiotics - negative - Total Plate count
Skim Milk Powder is produced from pasteurized full-fat cow's milk, by spray drying Immediate packaging is approved for direct food packaging in accordance with Regulation (EC) 1935/2004 Energy value 1491kJ / 351kcal, protein 34g, carbohydrates 51g, fat 1.25g - Contents of metals - Lead (Pb) - max 0,1 mg/kg - Aflatoksin M1 - max 0,050 µg/kg - Antibiotics - negative - Total Plate count
(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM
(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
1.dry charged battery & MF battery 2.Meet all DIN & JIS standard 3.Powerful quick start & long life 4.1-2 year used car scrap battery 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. Monthly Supply Capacity: 500 - 1500 metric tons, Type: all kind of scrap batteries, Fe Content: HMS Fe Content (%): 100%) Drained Battery Scrap: Black Packaging Detail: Pallet with shrink wrapping
Al Content (%) - 99.7%-99.9% Product name - scrap aluminum 6063 Material - Alluminum Keyword - cheap aluminum scrap Alloy Or Not Non-alloy
Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Grade : AA Product Origin ; Netherlands/ Romania Metal : 100% Alloy Or Not : Non-Alloy Color : Multiolor Secondary or not : Non-secondary ed Rails R-50: 51.67 Kg/m �¢?? GOST-7173-75 R-65: 64.72 Kg/m �¢?? GOST-8165-75 Metal : Nonferrous Metal Length : 1meters, 1.5 meters (ideal for melting) 6 meters 12 meters full length (ideal for piling)
Brand Name - Aluminum Engine Scrap Model Number - GB/T1196-2002 Type - Aluminum Tense Weight - 25kg Al Content (%) - 99.99% Product Name - Aluminum Engine Scrap Material - Car Engine Color - Silvery White Metal Al (min) - 99%-99.97% Grade - AA; Typical Chemical Composition - Al, Cr, Cu, Fe, Mg, Mn, Si, Ti, Zn Source - All Car Engine Brands Alloy or not - Alloy Quality - Engines are free from dirts, dusts, water, grease and oil Features Free from Nuts, Steel plate, paints
aluminum content 75%, 95%,99.7% Application: 1.mainly used for melting ingot 2.discontinuous melting with scrap 3.easy control and operation 4.fast melting 5.energy saving This Scrap Aluminum is produced in the production of industrial waste.Such as:Scrap Aluminum Wire,Scrap Aluminum block and so on 6.Aluminum alloy production , Steelmaking and requirements of the coating is not high,Fireworks production.
