This machine is a new model which is having laser wire with welding gun, operate by hand .
It is very flexible for welding some unusual angle.
Convenient for welding and easy for maintenance .
The energy, pulse width, frequency and light spot size can be adjusted in a large range to realize different welding effects.
The parameters are adjusted by the lever in the seal cavity, which is simple and highly efficient
Handheld laser welding machine is mainly used for inside, outside right Angle, flat welding, seam welding.
The handheld Laser welder is a new, more flexible welding process that can weld small, medium and large work pieces.
Fiber laser welding machine is an advanced welding technology which is a perfect replacement of traditional electric welding, MIG and CO2 welding.
Laser Cleaning process is to melt the connecting area by a very high-energy and dense beam with a large amount of heat. The single module optical fiber laser source provides consistent and stable power and high quality of laser beam. The laser power range can be adjusted according to actual production needs. This solution guarantees unparalleled application flexibility and high reliability.
Parameters
Laser 1000W 1500W 2000W 3000W
Cleaning head TOPtek PRO WOBBLE
Wire feeder TOPtek EasyWIRE
Control system TOPtek PRO Cleaning
Fiber laser welding machine is an advanced welding technology which is a perfect replacement of traditional electric welding, MIG and CO2 welding.
Laser welding process is to melt the connecting area by a very high-energy and dense beam with a large amount of heat. The single module optical fiber laser source provides consistent and stable power and high quality of laser beam. The laser power range can be adjusted according to actual production needs. This solution guarantees unparalleled application flexibility and high reliability.
ROLLED OVER TRADITIONAL WELDING IN ALL ASPECTS
1.Faster speed: the welding or cleaning efficiency is 5-10 times higher than traditional welding.
2.Easy operation:No need experienced operator, any green hands can operate it within 30 minutes training.
3.Cost-saving: 80% cost-saving than traditional electric welding, MIG welding, argon arc welding. Less operator, less consumption(gas and consumables etc.) and less working time. For example,if the workload equals 1 experienced operators working in 10 hours, but with the laser welding or cleaning machines, only 1 ordinary being can fix it in 3 hours.
4.Welding seam is almost invisible, and smooth welding surface.
5.Very small deformation on Workpiece.
6.Operation safer.
7.Environmental-friendly welding.
Technical Parameters
Name Portable laser welding machine Welding thickness Carbon steel,Stainless steel (0.5-8mm)
Laser Power 1000W/1500W/2000W/3000W Welding seam 0.5mm
laser wavelength 1064 NM Voltage AV 220V/380V
Laser cable length Standard:8-10� meter, Max:15meters Laser lifetime 100,000 hours
Working mode Continuous Working humidity range
142695 Laser Welding Machine Suppliers
Short on time? Let Laser Welding Machine sellers contact you.
Handheld laser welding machine
Handheld laser welding machine is also called manual laser welding machine,fiber transmission laser welding machine.Unlike traditional hard optical laser welding machine,its laser energy transmitted by soft fiber,which greatly enhances the practicality of the machine.We usually equip the handheld laser welding machinewith fiber,the practicalmoving radius is and the laser head can be fixed on the bracket when the customer does not need to move the work,which can realize the lase rwelding machine are imported channels.The overall performance of the machine is stronger than that og the general welding machine.The fiber is made by the Japanese Mitsubishi,and the length can be lengthened according to customer needs.
Application: applied for the welding of various metal letters, LED illuminated letters, customized metal signage, and exterior billboards and metal crafts, etc.
Available Metal: Stainless Steel, Brass, Tin, Galvanized Sheet, Cold-Rolled Plates and other Metal Plate
Technical parameters
Model HL-W-200
Working table dimension200mm x 100mm(customized)
Welding depth0. 1-2mm
Max output power 200w
Laser wavelength 1064nm
Pulse width 0.3-20ms
Welding frequency 1-100hz
Pump sourceXenon lamp
Single pulse engrgy 105j
Consumed power 18kw
Electrical source 220v 10%/50hz/40a
Adjustable facula size0.2-2mm
Waveform number 16
Power consumed 6kw
Cooling mode Water-cooling
Control of worktable Manual+CNC programming (optional)
Consumable material Krypton lamp / filter / water / electricity
Optional accessories Anti-laser glasses
Usage environmentClean, no shaking, temperature 13 humidity 5% -75%.
Introduction:
The model RS-SWF-500S Metal laser welding machine adopts the CW fiber laser source with a trouble-free service life of more than 100,000 hours. It has the advantages of excellent beam quality, fast welding speed, firm and beautiful welding seam. It is mainly used for rapid welding thin materials.
Features:
Adopts continuous fiber laser source with high electro-optic conversion rate, low energy consumption, and excellent laser beam quality(M2
Features
CY-JH series of models are a kind of high-performance solid pulse laser machine.It has integrative design, high output power,good energy stability, simple and convenient operation, reliable performance, wide application and other characteristics. It adopts advanced Germany combined gold-plated reflector cavity laser technology, use special beam election mode and shaping technology, which ensure a high output power and excellent beam mode.
Application
Widely applied in the fields of aeronautical space, mechanism, electron, communication, dynamic, chemical, automobile manufacture and other industries.Especially in welding,cutting,marking for kinds of alloy.This kind of model is specially designed for welding Battery.
Features
Cy-jx adopt nd:yag, laser supplier, cooling system and control system as a integrative design, beautiful structure, high output power, good energy stability, simple and convenient operation, reliable performance, wide application and other characteristics.
Observing system:it is equipped with special-purpose micro-scope observing system with cross cursor. It has high speed electron flitting device to protect the operator's eyes from being hurt.
Application
Widely applied inrepairing alloy material as gold, silver, platinum and other jewelry.Especially in repairing, spot stitch, electronic parts, ic, .Battery, watch, etc.
High reliability, long resistance, high energy exchange, top beam quality, air cooling, low price, easy operation.
for repairing and welding on mould of precision injection,die casting and repairing for casting,machineing parts,such as sand hole,collapse,cutting processing etc
For gold and silver jewelry welding, such as filled holes, spot welding gaps and claws etc.
dJewelry, golf head, medical equipment, instruments, Electronic, automobile and other industries.
Characteristics-
High Quality Laser cavity with life more than 8 to 10 years before service.
Laser power feedback controller.
Stable optical performance round the clock.
Maintenance free Lamp operating life more than 400 hours or personalized design with ergonomics principles.
Fast, efficient, deep, little distortion, little heat-affect area quality welding, welding points free from pollution, saves energy.
Features-
The energy, pulse width frequency and light spot size can be adjusted to achieve different welding effects. The parameters are adjusted by the lever in the sealed cavity, which is simple and highly efficient.
Ceramic converging cavity is imported from Britain. Jewellery Laser welder is corrosion resistant and high temperature resistant, and has 8-10 years service life.
Uses the most advanced light shielding system to eliminate the irritation to eyes by light during working.
Able to work round the clock with same stable performance. Maintenance free operation for 10,000 hours. Ergonomics â?? Based design avoids fatigue even after long time working.
Jewellery Laser welder is widely used in aviation, Aerospace, Sports Products, Jewellery, Golf head, Medical instruments, Titanium alloy dentures, Instruments, Electronics, Machinery, Automobile etc.
It is specially used for perforating Gold and Silver jewellery, Spot welding, Repairing, Inlay and welding of claw.
Technical Specifications-
Model SIL 200 W
Max.output power 150 / 200 W
Max.pulse energy 100 / 120 J
Peak power 6 / 7 KW
Pulse duration 0.1 20 ms
Pulse frequency 1-100 Hz
Pulse duration 0.1-20 ms
Welding depth 0.1-4.0 mm
Focal diameter 0.1-2.0 mm
Vision system Stereo microscope 10X
Power supply AC 220 V / ± 10% / 50 Hz
Net weight 150 kg
control system Microchip CPU
• 4 Axis laser Welding
• High magnification system
• Adjustable waveform
• Uses military grade water tank
• Imported compressor
• Pulsed laser power supply
• Internal Microcontroller
Technical Specification
Model : Galaxy:3400A-500W
Whole Power Consumption : 12KW
Laser Wavelength: 1064nm
Laser Power : 200W-650W
Laser Point : Size>=0.15mm
Laser Type Nd : YAG
Repeating Frequency : 1- 200Hz
Positioning Accuracy : 0.01mm
Working Table : 300*300mm(Customization)
Sight Positioning : CCD Monitor (Standard Configuration)
Four Axis : X Y Z C Axis
The Diameter of Rotation Axis : 40mm
Focus Length : 200mm
Note: *Also available in 250W (1200 x 1200mm working area)
This technology is widely used in production of photoelectric coaxial devices.Besides,single beam laser welding machine is popularly used in production of horizontal dual in the devices and power supply devices,etc,like coupling positioning spot welding of fiber, shell cover seal welding, spot welding precision coupling of fiber optic isolator,etc.
Description-
SILROBOWELD it is modern 2 to 6 kw laser welding delivers high quality, high precision weld that is not possible with conventional CO2 welding.
Fiber laser technology allows to processes different types of thickness and materials, including similar and different material.
SILROBOWELD operates in standard laser safety booth to protect user from shorter wavelength emitted by fiber laser.
SILROBOWELD its takes higher level of precision and productivity using fiber laser processes material such as brass, copper, and aluminum.
Fiber laser technology is with unmatched beam quality and electrical saving, due to this requires less maintains to oscillators to generate beam.
In SILROBOWELD teaching is done with inline CCD camera which is easy , fast and accurate teaching of welding path.
Another key features are rotating mirror in welding head, which helps to rotate beam direct path of welding, it can make any shape of laser beam like 8, O, line (vertical or horizontal)
Q-switched fiber lasers are capable of providing pulse energies in the mJ range, but for materials processing applications requiring multiple Joules of pulse energy at multi-kilowatt peak powers IPG has developed the unique Quasi-CW Fiber Lasers. These fiber lasers occupy the space between kW class CW fiber lasers and Q-switched pulsed lasers. They are very similar to kW class fiber lasers with one notable difference: their peak power during ON time is up to tenfold higher than their average power in pure CW mode of operation. Thus, these lasers can provide tens of joules of energy over a long pulse, from 50 microseconds to 50 milliseconds.
Feaatures-
Laser power from 75 W to 2.3 kW.
Peak power will be ten times more than actual power.
TETE laser equipments are widely used for laser marking, laser welding and laser cutting in various industries. Kinds of laser series meet different processing requirements.
Features
1. Widely applicable, extensively applied in precise welding of various metals and non-metals
2. High flexibility, deployed with a manipulator, it can realize a precise welding in different angles
3. High stability, adopting energy negative feedback technology to ensure laser power output is stable.
4. Laser power output is verified and maintained to ensure high welding repeatability and quality.The output power is shifted within ±2%.
5. During processing, waveform can be adjusted according to shape and material of workpiece to improve welding quality greatly.
6. Energy and time share options enhance processing flexibility. Maximum 4 beam delivery optical fibers can be equipped. It can support more than one workstation or multiple welding heads to improve production efficiency.
7. It can communicate with other system through I/O connectors.
Imported major components with high quality ensure system reliability.
8. Welding parameter can be saved in Chinese and English name.Storage capacity can be extended. User-friendly interface.
Application&Characteristics:
Advertisement letters laser welding machine is widely used for welding stainless steel, iron, galvanized sheet, logo,etc. It's used for making a variety of stainless steel letter, LED luminous characters, AD Logos, signs and other fast welding.Logo making, fine word production, metal word production, Copper factory, advertising production company, and so on.The company adopt advanced British technology and created high-tech machines, the machines take the place of traditional argon arc welding, soldering welding and improved efficiency. There,?s no deformation or color change after welding, saving time and process.
Technical data:
Laser welding machine data
Machine typeHH-300HH-500
Maximum laser output power300W500W
Laser work materialNd:YAG
Laser wave length1064mm
Spot size0.2-3.0mm
Single pulse energy90J120J
Laser output focal length150-250mm150-250mm
Laser head 120mm
Welding depth1mm1mm
Pulse width,,10ms
continuous adjustable
Pulse frequency,,30Hz ,,50Hz
Observation systemCCD camera and red light positioning
Total power,,9KW,,16KW
Power demand220V 10%/50/60Hz380V 10%/50/60Hz
Table size1000mm800mm1000mm800mm
Weight280kg450 kg 20
142695 Laser Welding Machine Suppliers
Short on time? Let Laser Welding Machine sellers contact you.
