Brief introduction of jacketed glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features of jacketed glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250C for high temperature experiments, and limit temperature of -60C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Laboratory Chemical Ammonium Di Hydrogen Potassium Di Hydrogen phosphate Phosphate Phosphate Anhydrous Calcium Acetate P Potassium Hydroxide pellets Phosphate Anhydrous Sodium Di Hydrogen Calcium Carbonate Potassium Hydroxide powder Di Sodium Hydrogen Phosphate Dihydrate Calcium Chloride Potassium Metabisulphite  Anhydrous Sodium Hydroxide Pellets Calcium Chloride Dehydrate Sodium Acetate Anhydrous  Calcium Citrate Sodium Acetate Trihydrate Calcium Hydroxide Sodium Bi Carbonate Calcium Sulphate Sodium Benzoate Anhydrous Sodium Hydroxide Powder  Calcium Sulphate Sodium Carbonate Anhydrous  Dehydrate Sodium Gluconate Citric Acid Monohydrate Sodium Chloride � Dextrose Anhydrous Sodium Citrate Anhydrous Dextrose Monohydrate Sodium Citrate Dihydrate Di Ammonium Hydrogen Phosphate Di Calcium Phosphate  Anhydrous Di Calcium Phosphate Dihydrate Di Potassium Hydrogen Phosphate
Ferric Chloride Anhydrous (Pure)
Brief about glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features about glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250°C for high temperature experiments, and limit temperature of -60°C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Features 1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle. 2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean. Technical Data Glass reaction vessel: 10L; Jacket capacity: 3L; High borosilicate glass 3.3; Kettle body tolerable temperature: -80 to +200 degree; Kettle body resistance to temperature difference: 90 degree; Motor power: 90W; Stirring speed: 50 to 500rpm; Operating pressure(MPa): Vacuum or normal pressure.
Brief introduction of jacketed glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features about glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250C for high temperature experiments, and limit temperature of -60C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
We are leading Mfg and Exporter of Jacketed reaction vessel with capacity from 500 ltrs upto 45000 ltrs
Jacketed glass reactor is an ideal instrument for pharmacy, biology, fine chemistry and material synthesis. With menstruum in inlayer and heating or cooling source in interlayer, jacket glass reactor can perform synthesis, distillation, separation and reflux under airproof condition. Now we can supply you jacketed glass reactor from 1-100L. Function: Putting reaction solvent into jacketed layer of glass reactor to do stirring reaction, the jacketed layer can do constant temperature, heating and cooling reaction to use cooling or heating liquid. According requirements in atmospheric pressure or negative pressure mixing reaction, and can do backflow of reaction solution with distillation. Model : TFD-50L Capacity : 50L Power: 370W Rotating Speed : 100-1400rpm Mixing Torque 1300r/min :22000g.cm Glass Kettle Cover : 60#40#/50#/29# Glass Material: Borosilicate (Pyrex: G3.3) Frame Material: Stainless Steel Mouth Amount of Vessle Lid: 4 Vaccum Degree: 0.095Mpa Machine Size(cm): 100*105*240 Can be customized as requested. Wooden cases.
Crude oil, bonny light crude oil, blco, wti, lpg, lng, diesel (d2,d6), jet fuel a1, en590 ulsd 10ppm, rebco, espo, lco, gasoline 91,92,95, bitumen, ifo cst 180, industrial chemicals, laboratory glassware, equipment, laboratory equipment & instruments, medical equipment, chemicals, glassware, plastic wares, filter papers & other laboratory consumables, reagents.
What is a reactor? The reactor is a comprehensive reaction vessel, and the structure, function and configuration accessories of the reactor are designed according to the reaction conditions. Pre-set reaction steps can be completed with a high degree of automation from feed-reaction-discharge, which are strictly regulated for important parameters of the reaction process such as temperature, pressure, mechanical control (stirring, blasting, etc.), reactant/product concentration. Its structure generally consists of kettle body, transmission device, stirring device, heating device, cooling device, and sealing device. Corresponding auxiliary equipment: fractionation column, condenser, water separator, collection tank, filter tank, etc. Material:SUS304, SUS316L stainless steel Capacity:customized Heating:Electric heater heating; Circulation oil heating; Steam heating etc Application:dairy products, beverage, and pharmaceutical factories. Advantages 1. Bear higher working pressure and deformation. 2. Fast heating or cooling speed 3. High temperature resistance 4. Strong corrosion resistance 5. Can be customized according to requirements. � Shandong Qinglei Environmental Technology Co.,Ltd is an equipment manufacturer integrating design, production and assembly. Our products include heat exchangers, heat exchange units, pressure vessels, storage tanks, TCU temperature control systems, reactors, distillation towers, VOCS purification and recovery systems, vacuum frying machine. If you need any of them,please donâ??t hesitate to let me know,I will reply you ASAP.
Application: Distillation Azeotropic distillation (phase separation) in glass overhead (optional) Evaporation to any desired consistency Multi-component reactions Gas dispersion below liquid surface Extraction multi phase mixture Crystalization Refluxing Common chemical reactions liquid / liquid, liquid / solid
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide. Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity. Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3. Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials. Spillage Treatment Method:Simple cleaning and burying Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun. Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Other Information: Anti-caking agent can be added at the request of customers. Technical Specifications Analysis items Standard Na2SiF6 99% min Loss of weight on drying at 105â?? 0.3% max Free acid (as HCl) 0.1% max Chloride (as Cl) 0.1% max Sulphate (SO4) 0.3% max Iron(Fe) 0.02% max Water-insoluble matter 0.5% max Particle size distribution Passing through 40 mesh sieve 98% min Passing through 60 mesh sieve 90% min Passing through 325 mesh sieve 25% max
1.Name: Sodium nitrate Chemical formula: NaNO3 Formula weght:84.99 2.Property: (1) ordinary sodium nitrate: white little crystals or light yellow (2) dry powder sodium nitrate: non-caking, showing loose status. Density:2.257. It is liable to deliquesce, dissolved in water, soluble in liquid ammonia, slightly soluble in ethanol and glycerin, Melting Point:308. While being heated up to about 380 it will decompose and release oxygen and turn into sodium nitrite,as the heating goes on, it will decompose into oxygen, nitrogen and nitrogen oxide. It has strong oxidability and can cause combustion explosion if being mixed with organic substance, sulfur, sodium nitrate etc. 3. Usage:Â it has been wildly used in the glass industry, dye, dynamite, metallurgy, machinery, ceramic etc. 4. Specification: (Technical Standards:GB/T4553-2002) Item Unit High G. First G. Qualified G. Dry powder G. Assay % 99.7 99.3 98.5 99.3 Sodium nitrite % 0.01 0.02 0.15 0.02 Chlorides % 0.25 0.30 -- 0.25 Water insolubles % 0.03 0.06 -- 0.03 Moisture % 1.0 1.5 2.00 0.2 Carbonates % 0.05 0.10 -- 0.1 Iron % 0.005 -- -- 0.005 Loose degree -- -- -- 95 5.Package: net 25kg/50kg net each in plasic woven inner plasic bag,or 500kg net each in flexible container.
Paper products, medical instruments and equipment, surgical instruments and equipment, scientific instruments and equipment, medical disposables, all types of chemicals, fresh vegetables, fresh fruits, tea, incense sticks, stationery items, educational kits, household items, handicrafts, furniture, crockery, scrap.
Soap, detergents, water treatment chemicals, mining chemicals, agricultural products, minerals like raw bauxite, barium sulphate, bentonite, hydrated lime, quick lime, petcoke, sulphur, ferric chloride, sodium silicate, nitric acid, chlorohexidine gluconate 20%, povidone iodine, cetrimide.
Brief Introduction of the Jacket Glass Reactor The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional. The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux. Main Features of the Jacket Glass Reactor 1, The use of borosilicate glass (GG17 material), has excellent physical and chemical properties. 2, Speed mixing, smooth and reliable operation, torque, no spark. 3, PTFE components mechanical seal, proprietary technology, can maintain the market similar products, high vacuum (-0.095mpa or so), the leading domestic. 4, PTEE discharge valve, kettle body and lid are also customized according to customer requirements. 5, The reaction of the sandwich heating (cooling) solution can be completely removed after the reaction, no solution. 6, Regardless of refrigeration or heating, can be produced according to customer requirements matching products. 7, The overall structure of science, novel, practical, beautiful, leading domestic.
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction. Brief Introduction of the Jacket Glass Reactor The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional. The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
Hard low E is produced by spraying a chemical material with Tin componds on the melting glass surface to form single layer of compound film with certain low emissivity function. Applicationï¼? Architecture:� curtain wall, facade, windows and doors Home appliance: micro oven, refrigerator Advantage: Improved energy efficiency Less UV Reduced condensation Specification: Glass Thickness: 3.2mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm Max size:� 3300*8000mm Normal size:� 2134x3300mm, 2440x3300mm, Quality Standard: In accordance with CE, GB, AS/NIS 2208-1996
Truck & equipment spare parts, spare parts for trucks and heavy equipment, engine, clutch & gear parts all kinds of auto ac parts & auto lamps, batteries tyres , safety products and ppe items safety glasses, goggles, face shields safety boots, steel toed shoes reflective vests, jackets, heat resistant gloves, cut resistant gloves, welding helmets, jackets, gloves, aprons, chemical resistant suits, aprons, coveralls, safety harnesses, lanyards, anchor points.
It is processed by controlled thermal or chemical treatments to increase its strength compared with normal glass, about four times stronger than annealed, glass. When broken, tempered glass fractures into small, relatively harmless pieces, it is widen used for window, door, railing, furniture, vehicle.
