Kosoo nh heat shrink tube Features/Benefits Shrinkage ratio: 2:1 Low smoke Free of added halogens Low evolution of acid gases Operating Temperature Range Operating temperature range: -45+óGÇP¦Æ~105+óGÇP¦Æ Minimum shrink temperature: 80+óGÇP¦Æ Minimum full recovery temperature: 120+óGÇP¦Æ PACKED IN ROLLS
Heat shrink tubing kosoo k2 Features/Benefits Shrinkage ratio: 2:1 Flexible, high flame retardance Excellent physical, chemical and electrical properties, for highly reliable, general purpose tubing Good abrasion and solvent resistance Complied with EN71 Part 3, EN1122, EPA3050B, EPA3052 European environmental standards Wide range of sizes and colors PACKED IN ROLL
Heat shrink tube kosso k-2(3x) Shrinkage ratio: 3:1 Flexible, high flame retardance Excellent physical, chemical and electrical properties Resistance to abrasion and fluids Operating temperature range Operating temperature range: -55p+G-ªG+GG¦fP+T-ª+GG¦ß~135p+G-ªG+GG¦fP+T-ª+GG¦ß Minimum shrink temperature: 70p+G-ªG+GG¦fP+T-ª+GG¦ß Minimum full recovery temperature: 110p+G-ªG+GG¦fP+T-ª+GG¦ß Packed in roll
Kosoo k-2 (gys) heat shrink tube Application KOSOO K-2 (GYS) is one of the KOSOO K-2 series of heat shrinkable tubing. It is a co-extruded, green and yellow striped, heat shrinkable tubing designed for use in earth sleeving. Features/Benefits Shrinkage ratio: 3:1 Flexible, high flame retardance Excellent physical, chemical and electrical properties, for highly reliable, general purpose tubing Operating Temperature Range Operating temperature range: -55+óGÇP¦Æ~135+óGÇP¦Æ Minimum shrink temperature: 70+óGÇP¦Æ PACKED IN ROLLS
Kosoo k-2 (z) heat shrink tube Features/benefits Shrinkage ratio: 2:1 Flexible, high flame retardance Low shrink temperature Good thermal stability Excellent physical, chemical and electrical properties Complied with en71 part 3, en1122, epa3050b, epa3052 european environmental standards Free of pcbs, pcps, pbbs, pbbos, pbbes, pbdes, which are classified as environmentally hazardous substances, conform to european rohs environmental standards Operating temperature range Operating temperature range: -55póGÇPµÆ~135póGÇPµÆ Minimum shrink temperature: 70póGÇPµÆ Minimum full recovery temperature: 110póGÇPµÆ Packed in rolls
Shell and Tube Heat Exchanger
Product Name:POF shrink film wrap Thickness:From 8mic-38mic / customized Width:From 150-3000mm/customized Material:100% virgin polyolefin material Transparency:High Clear and High Transparent Colors:From 1 to 8 colors/ customized Other customized service:Size; Colors;LOGO; Packing;OEM etc. Modes of packing:Packed in standard cartons Finishing Time:
Product Name:POF shrink film wrap Thickness:From 8mic-38mic / customized Width:From 150-3000mm/customized Material:100% virgin polyolefin material Transparency:High Clear and High Transparent Colors:From 1 to 8 colors/ customized Other customized service:Size; Colors;LOGO; Packing;OEM etc. Modes of packing:Packed in standard cartons Finishing Time:
Solvent distillation plant , ethanol distillation plant , etp, water treatment plant , effluent treatment plant, evaporator , dryer, zld plant, lab equipment supplier, lab chemical supplier, industrial equipment , storage tank , bulk tank, petrochemical plant, ethyl acetate distillation plant, supplier of chemicals, reactor , pressure vessel , instruments, plc panel ,dcs panel, mcc panel , steam boiler, agitator tank, mixing tank, blending tank, bottling plant , vodka plant , ena distillation plant , fermentation plant , cooking plant, cpu plant, dg set, dpr report. etc, industrial dryer, industrial storage tanks, lab equipment, bio cng plant, biogas plant, bioreactor, sludge settling tank, wash settling tanks, pre fermenters, culture vessel, blender, blending tank, agitator, mixing tank, shell and tube heat exchanger, reboiler, reactor, mcc electrical panel, pressure vessel, evaporator, industrial dryer, beer plant, brewery plant, ethanol distillery , grain alcohol distiller plant.
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder
High quality silicone foam tube for medical, consumer and industrial application. It has outstanding heat-resistant air aging performance, strong sealing, ozone resistance, and is moisture-proof.
Materials: carbon steel and stainless steel (302,304,304L,316,316L etc). Characteristics:The welded stainless steel water well screen is made up of rods and warp. The rod can be round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire). Water well screens have a structure and high open area, as well as accurate slot dimension. At the same time, water well screen have heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Uses: The strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters. Continuous slots significantly increase discharge area,thus providing greater access to water-bearing zone . We can produce this pipe with diameter 80mm-550mm ,slot size 0.1mm-10mm,length 50mm-5850mm .
We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized outer or inner packaging. Our boxed packaging has been produced to meet all kinds of requirements. This boxed heat shrink can be offered to you in various types of colors and kinds of heat shrink. Our products are easy to use and reliable in performance. If you choose our heat shrink tubing, it will bring you more convenience and reduce many unnecessary troubles. We guarantee reasonable prices and satisfactory quality, making it a good fit for your own brand. We can offer: - Competitive prices - High quality products - Sample orders accepted - Secure payment and delivery worldwide - Free shipping for bulk orders For custom production and any questions, please feel free to contact! Looking forward to be your supplier in China and have a long term cooperation. Contact us:Mors
Aokeray ptfe tubing heatshrinktubesNET manufacturer from PTFE/FEP/PFA tube PTFE Teflon Insulated Tubing ,PFTE RAW MATERIAL is FROM most commonly known as DakiN a brand name .USE ON sleeve bearings, push-pull cables, non-stickroller covering etc Control Cable Assemblies ,Motorcycle Cables PTFE TUBING ,ptfe lined tubing. Car cable high temp Teflon liner ,MOTORCYCLES Cable,Hydraulic clutch, brake and oil,Clutch and brake fluid, oil transfer .PTFE hose is specified in many of the most challenging industrial applications such as those found in steel mills, foundries, transit trucks and buses and air compressors..It is also an ideal choice for vacuum/steam lines, spray paint, marine/military, aerospace, biomedical,chemical processing, industrial adhesive, paper mill.The extruded PTFE tube has excellent flex life, high temperature tolerance and superior chemical resistance.QCSS PTFE hose working temperature range is -70 to 260 degree. A reinforcement 304/316 stainless steelwire cover adds strength and durability to withstand high working pressures and harsh environments.Burst pressure reaches to 12,000 psi.Production under ISO 9001:2008 and CE control. High quality product and customer'ssatisfaction is our pursuit. Good faith cooperation. Bright future.40°C and 260°C. Applications: For transfer of high purity products, chemicals, dairy and cosmetic products. Also suitable for heat exchangers and as protective sleeve for cables. They have excellent heat resistance, viscosity, chemical resistance, electrical insulation, etc,we also help custom like annealing, beveling, bonding, printing, marking, tipping, punching, flaring ect. .Aokeray ptfe tubing,heatshrinktubesNET
Product name: Molasses Beet HS Coe: 17039000 Origin: Egypt Packing: if in container it will be by flexitank OR if in Vessel it will be at tanks. Beet molasses is the syrupy by-product of the production process to extract sugar from sugar beets. The residual liquid that is left over is an excellent source of energy for livestock. It also offers a valuable feed resource to the cattle industry and a sugary substrate for the yeast and fermentation industry. Molasses is sold in bulk, delivered in heated tanker trucks (approximately 28 tons) USES Beet Molasses is an excellent source of energy and a good source of protein and essential minerals for both dairy and beef cattle. In growing and finishing diets, it can be added to dry rations or blended with other ingredients to produce a balanced liquid feed. For beef cattle, it can also be top-dressed to improve palatability of poor hay or silage. Molasses is also popular as an additive in salt licks and mineral supplements, assisting as both a sweetener and a binding ingredient. Molasses is a key ingredient in the production of yeast. Molasses is added to other substrates, heated and processed to create dry and liquid yeast for sale at both the wholesale and retail levels. Finally, in recent years, molasses has gained popularity as an alternative or a supplement to chloride salt for de-icing roads. Not only does it cost less than rock salt, it is also less corrosive and more environmentally friendly. STORAGE AND HANDLING Beet Molasses must be stored in a well-insulated, heated tank; at temperatures above 110 degrees it can easily be pumped with a 2.5 to 3 HP pump and 3 inch tubing. FOR MORE INFO AND ORDERS CONTACT US FOR NEXT TENDER (24/7)
We are a multi facet company dealing into multiple products categories with 4 different firm names dealing in their specific range of products. folding cartons & boxes, packaging boxes, pizza boxes, corrugated boxes, sticker labels, self adhesive label, condoms, lamitubes, pharma aluminium tubes, shrink sleeves, paper & paper board, eflute boxes, pos rolls, thermal label, thermal paper, greaseproof rolls, printed burger paper rolls, sticker's, condoms, gummies, food supplements, pharmaceuticals & medicines, natural supplements & cosmetics, luxury goat milk hand made soaps, beauty products (100% natural), medical devices, medical disposables & consumables, adult & baby diapers, sanitary napkins, paper & paperboard, a4 copier papers, kraft paper, recycled paperboard..
Soft adhesive-lined heat shrinkable tube is made of cross-linked polyolefin material and environmental friendly hot-melt adhesive.Its working temperature is -45~125 degree and shrink temperature is 70~125 degree.Shrink ratio is 2:1,3:1,4:1.Two kinds of wall thickness is optional.It has passed UL,ROHS,REACH certification with 600V.It is widely use in manufacturing of electrical and electronics,communications,automobiles,shipping,aircraft etc.
