• Kapok fibre
Kapok is a fluffy, silky yellowish fiber, similar in feel to milkweed or down.Kapok is similar to cotton in that both fibres are found around the plant seeds, rather than extracted from the stem or leaves.Individual fibres are 1.2 to 3.6 (0.47 to 1.41 inches)long, averaging 1.9cm (0.78 inch), kapok is a moisture-resistant, quick-drying, resilient, and buoyant fibre. Typical analyses indicate that the kapok fibers comprise 64% cellulose, 13% lignin and 23% pentosan.The hollow core makes kapok very light, 8 times lighter than cotton by volume.During the war, kapok was employed for insulating tanks, for lining aviation suits, for filling floats of army assault-bridges, and generally for replacing cork wherever lightness, moisture-resistance and floating power were needed. Kapok is chiefly cultivated in asia; the kapok fibre important product of pakistan.
M. Anwar is the chairman and founder anwar kapok trader. Anwar kapok trader is committed to operating a successful business by developing, manufacturing, marketing and supporting quality kapok products for the world textile industry. Developing long-term relationships with our customers and suppliers providing superior quality products at competitive prices.
· We aim to be a distinctive kapok seller with international presence delivering best quality kapok fibre through innovative techniques and effective resource management by maintaining high ethical and professional standards.
· We believe that processing 5kgs of kapok is just as important as 1000kgs.
· Care is given to assure that the best final product is returned to the customer.
1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
Coir fibre is the major product that is extracted from the coconut husk. Coir fibres have a multitude of different applications and they are available in blocks and bales as well. The coir fibres are generally used in the production of ropes, mats and mattresses. The coir fibres that are extracted from the inner layer of the outer part of the coir husk are used in large scale production of the ropes, mattresses and brushes.
Coir fibre is also the main product used in manufacturing the geotextiles. Geotextiles have a wide range of uses. But it is mainly used in limiting the soil erosion. Soil erosion has become one of the most prevalent problems of our society. Although there are various methods for limiting it but the erosion can be successfully kept in check by the use of geotextiles. Moreover, the geotextiles are also used in various types of road works and for surrounding the dams.
GreenTorus Organics Private Limited, India was established a decade ago with the sole objective of producing and promoting COCONUT FIBRE AND COCOPEAT. Built on the premise of ethical business policies and fair dealings, we have registered a position of one of the leading exporters in this field. The active support provided by our expert team and effective end to end production methodologies in own facilities spread over 5acres in multiple locations enables us to offer quality Coconut coir FIBRE and CocoPeat.
We have our own production units, washing yards, sorting and packing facilities situated in Pollachi and Udumalpet in South India enabling us to make the right choice of product and quality.
Our Production Capacity for Coconut Fibre is 120 MT per Month.
We can Offer you as follows:
Coconut Fibre : Brown/golden brown
Length : 5-30 cm
Moisture content : max 18%
Impurity : max 3%
Packing : 100-120 Kg Tightly Strapped Bales.
MOQ : 18-20 MT - 1 x40HC
Place of Origin Bac Ninh, Vietnam
Product Type Raw Cotton
Material 100% Kapok
Fiber Length custom
Strength 15cm
COLOR Natural White
Type Bulk
Packing 150/Kg Bale
Supply Ability 1000 Roll/Rolls per Day
Our premium fibrecuts specially less than 10mm designed for multiple utilities like soil amendments, mulching, weed protection , landscaping etc.
Compressed into easily breakable blocks of 4.5 kgs
Such 5 blocks in a poly bag on packed on pallets
Appx 12 tons in a 40HC
OR
650-700 kg jumbo bags
14-15 tons in a 40HC
8536 Kapok Fibre Suppliers
Short on time? Let Kapok Fibre sellers contact you.
