Isopropyl Myristate Ipm Cas 110 27 0 Suppliers and Manufacturers

Product Name: Isopropyl myristate Synonyms: Isopropyl Myristate, 96% 25GR; IPM 100; IPM-EX; IPM-R; Radia 7730 (IPM); Isopropyl myristate Vetec(TM) reagent grade, 98%; MYRISTIC ACID ISOPROPYL ESTER MINIMU; ISO-PROPYL N-TETRADECANOATE CAS: 110-27-0 MF: C17H34O2 MW: 270.45 EINECS: 203-751-4 Melting point ~3 �°C (lit.) Boiling point 193 �°C/20 mmHg (lit.) density 0.85 g/mL at 25 �°C (lit.) vapor pressure 230 �°F storage temp. 2-8�°C solubility

Product Name: Isopropyl myristate INCI Name: ISOPROPYL MYRISTATE Molecular Formula: C17H34O2 Molecular Weight: 270.45 Appearance: Clear liquid Purity: 99% CAS NO.: 110-27-0 EINECS No.: 203-751-4 Supplier: ZHENYIBIO Isopropyl myristate (IPM) is a fatty acid ester which is used as solvent in water-in-oil emulsion, oils and fatty based ointments. The use of IPM is recommended in the Sterility Test chapter of the European, Japanese and United States Pharmacopoeia (EP, 2.6.13, JP, 4.06 and USP, 71) as diluent for oils and oily solutions, as well as for ointments and creams. Indeed, its solvent properties improve the filterability of these samples.

S.N CAS No. Item 1 9003-07-0 Poly(propylene) 2 25766-59-0 Polycarbonate resin 3 26062-94-2 Poly(butylene terephthalate) 4 9002-86-2 poly(vinyl chloride) 5 9002-88-4 Polythene 6 9003-56-9 ABS Resin 7 25212-74-2 Poly(1,4-phenylene sulfide) 8 25135-51-7 Polysulfone 9 110-63-4 Butane-1,4-diol 10 9003-35-4 Phenol-formaldehyde resin 11 9003-53-6 Polystyrene 12 9011-14-7 Poly(methyl methacrylate) 13 26009-03-0 Poly(2-Hydroxyacetic acid) 14 24980-41-4 Polycaprolactone 15 31533-76-3 Polyphenyl ether 16 29658-26-2 PEEK 17 9002-81-7 PolyoxyMethylene 18 26023-30-3 Polylactic acid 19 63428-84-2 Polyamide 20 25038-59-9 Polyethylene terephthalate

1 63148-62-9 Silicone oil 2 77-92-9 Citric acid 3 9003-05-8 Polyacrylamide 4 7664-39-3 Hydrogen fluoride 5 9000-11-7 Carboxymethyl cellulose 6 7757-82-6 Sodium sulfate 7 68-04-2 Sodium citrate 8 7664-38-2 Phosphoric acid 9 1310-73-2 Sodium hydroxide 10 497-19-8 Sodium carbonate 11 139-33-3 EDTA disodium 12 67-63-0 Isopropanol 13 25322-68-3 Polyethylene Glycol 14 144-55-8 Sodium bicarbonate 15 4404-43-7 Fluorescent Brightener 28 16 7758-29-4 Sodium tripolyphosphate 17 7601-54-9 Trisodium phosphate 18 532-32-1 Sodium benzoate 19 5329-14-6 Sulfamic acid 20 142-91-6 Isopropyl palmitate 21 7782-99-2 Sulfurous Acid 22 9014-01-1 Subtilisin (Compound proteinase) 23 1344-09-8 Sodium silicate 24 6834-92-0 Sodium metasilicate 25 7720-78-7 Ferrous sulfate

S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid

THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.

Commodity: SODIUM ISOPROPYL XANTHATE H.S code: 2930902000 CAS Number: 140-93-2 EINECS No.: 205-443-5 DG Class:4.2 UN No.:3342 Specifications: Appearance Yellow Granule ACTIVITY %MIN 90.0 FREE ALKALI %MAX 0.2 MOISTURE&VOLATILE % MAX 4.0

Aluminium tri-sec-butoxide Product Name: Aluminium tri-sec-butoxide CAS: 2269-22-9 MF: C12H27AlO3 MW: 246.32 EINECS: 218-871-2 Mol File: 2269-22-9.mol Chemical Properties Boiling point 40 C density 0.967 g/mL at 25 C(lit.) vapor pressure 23 hPa (195 C) refractive index 1.439 Fp 82 F storage temp. Flammables area solubility Miscible with alcohol, isopropyl alcohol and toluene. form Oily Liquid Specific Gravity 0.9671 color Light yellow Item Specifications Appearance Colorless transparent or light yellow liquid Purity % 99.99 Aluminum content % 10.2-12.5 Density ( g/cm3) 0.92-0.97

Commodity: Potassium Amyl Xanthate Product Nature Chemical name: Potassium Amyl Xanthate (PAX) Equivalent to : Z-6, AERO 350 xanthate Molecular Formula: C5H11OCSSK Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form Testing method: Lead acetate titration CAS Number: 2720-73-2 EINECS No.: 213-180-2 Use A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of CU/PB/NE AND PYRITE, Especially For The Floatation Of The Gold In Gold And Copper Mine.it Could Make Good Result In Copper And Lead Oxidized Ore.ofeen Used In Rough Selecting And Scavenging. Specifications Chemical components Specification 1 Specification 2 Purity 85% Min 90% Min Moisture & volatiles 10% Max 4% Max Free alkali 0.5% Max 0.2% Max Packing and Storage 120KG IRON DRUM,134 DRUMS PER 20'FCL,16.08MT; (OR 110-180KG IRON DRUM) 850KG Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner BAG) 25-50KG WOVEN BAG

Product Name:Aluminium sulphate Molecular Formula:AL2(SO4)3 Hs Code: 2833220000 CAS Code:10043-01-3 Standard:HG2225-2010 Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter. Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive. Specifications Item Name Standard AL2O3 15.6% 16.5% 17% Fe2O3 ¤0.5 % 0.005 % 0.004% PH value .0 3.0 3.0 Water insoluble matter 0.2% 0.04% 0.03% Packing 25kg or 50kg or 1000kg in plastic lined woven bag

Product Name: Ferrous Sulphate Heptahydrate Molecular Formula: FeSO4. 7H2O CAS No.: 7782-63-0 Mol Weight: 278.05 Usage and Dosage: 1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement. 2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation. 3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color. 4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies. Storage: Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems. Precaution: Flammability Non flammable. No fire or explosion hazard exists. Packing: Net weight 25kgs, 50kgs per each plastic woven bag Technical Specification Appearance: Light green crystalline powder Fe 19.7%min Pb 20 ppm max As2 ppm max Cd 5 ppm max Size Crystalline Powder

Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste. Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance. Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )

Product Description Categories Sweeteners Qty in 20 FCL 9000kg, 11250kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E951 CAS No. 22839-47-0 HS Code 292429 Specification FCC/USP Aspartame is an artificial sweetener, like Acesulfame Potassium, Sucralose, Sodium Saccharin, Sodium Cyclamate and Neotame. It is widely in daily food products to replace sugar. There are too many types of Aspartame in the market, generally are powder 100mesh, Granular 20-60mesh, Fine Granular 60-100mesh, HDP 100-200mesh and Super Fine Powder 300mesh. Weâ??re China Aspartame supplier not only sell Aspartame but also provide manufacturers analysis, market price trends, free samples and also other food additives for mix combined. Aspartame Powder 100mesh Specification Test Item Specification Appearance White Powder Odor/Taste Conforms to Quality Standards Identification Meets Requirements Assay (on dry basis) 98.0% to 102% Loss on Drying 4.5% Residue on Ignition / Sulphated Ash < 0.2% Optical (Specific) Rotation +14.5 and +16.5 Conductivity 30 Scm-1 Transmittance 95% Extraneous Matter Free from material foreign to product pH (0.8% Solution) 4.5 ~6.0 Heavy Metal (as Pb) 10 ppm Lead < 1 ppm Arsenic < 3 ppm Residual Solvents Meets Requirements 5-benzyl-3,6-dioxo-2 Piperazineacetic Acid (DKP) 1.5% Other Related Substances 2.0% USP/NF; 1.5% EP L-phenylalanine 0.5% Solubility Completely Dissolves Particle Size NMT 5% on 100 mesh Bulk Density 0.3 +/- 0.1 g/mL Total Aerobic Plate Count 250 CFU/g Yeast and Mold Count 100 CFU/g Coliforms 3.0 MPN/g Escherichia Coli Negative/g Salmonella Negative/25g

Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%

Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%

Fumaric Acid powder, E297,CAS No.110-17-8, food acidulent, a common food additive included in many processed foods to keep them stable and to add tartness. Fumaric acid is used as a flavoring, because it is the sourest tasting of the organic acids. used as a food acidulent, in Bakery:Tortillas,Breads; Beverages: Fruit Juice Drinks, Wine; Confectioneries:Jellies and Jams;Desserts:Alginate Based Desserts,Gelatin Desserts,Pie Fillings,Egg White Foams; Animal Feed and Industrial Uses. As an experienced Fumaric Acid manufacturer and supplier, we has been supplying and exporting Fumaric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Fumaric Acid Food Grade Specification DESCRIPTION White, odorless granules or crystalline powder. It is soluble in alcohol, slightly soluble in water and in ether, and very slightly soluble in chloroform Chemical Name Trans-butenedioic acid Chemical Formula C4H4O4 Structural Formula Molecular Weight 116.07 Solubility (g/100g) in water at 25 0.7 in water at 100 9.8 in alcohol at 30 5.76 in dimethyl benzene at 20 0.03 SPECIFICATION (Executive Standard: GB 25546-2010,also meets the international standards of FCC,USP ect.) Assay(as C4H4O4) 99.5%~100.5%(anhydrous basis) Melting Point 294~300 Arsenic(as As) 2mg/kg Max Lead 2mg/kg Max Maleic Acid 0.1% Max Residue on Ignition 0.1% Max Water 0.5% Max