Please click here to check who's online and chat with them.

Find Verified Iron Cobalt Vanadium Alloy P6 Alloy Suppliers, Manufacturers and Wholesalers

Mar-07-19
Supplier From Xian, Shaanxi Province, China
 
IRON-COBALT VANADIUM ALLOY - P6 Alloy ; (Composition (Nominal) 6.00 Ni, 45.00 Co, 4.80 V, Bal. Fe; ) :(A ductile, semi-hard magnetic alloy which has been used in laminations for hysteresis motors. Alloy exhibits highest efficiency (loss per unit magnetic field strength) of any known material. :(Product availability and request a QUOTE!
GOLD Member
Feb-18-21

Alloy Ingots Adc12

$80.00
MOQ: Not Specified
Supplier From Saint-Paul, France
 
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)

1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;


2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.

Every lot of production need to do testing .


3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.


4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500


5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
GOLD Member
Nov-13-24
 
Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
The Incoloy825 has the following functions:
Good resistance to stress corrosion cracking.
Good resistance to pitting and crevice corrosion
Good oxidation resistance and non oxidative thermal acidity.
It has good mechanical properties at room temperature and high temperature up to 550
Certification of pressure vessels with manufacturing temperatures up to 450 C
Incoloy 825 metallographic structure:
Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization.
Incoloy825 Corrosion resistance:
Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550.
Typical applications include:
Heating pipes, containers, baskets and chains for sulfuric acid pickling plants.
Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline.
Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production.
Air heat exchanger in petroleum refining
Food Engineering
chemical process
Flame retardant alloy for high-pressure oxygen



Product name

INCOLOY Alloy 825
Grade

INCOLOY Alloy 825

Thickness range

0.3mm-3.0mm,

Width range

600mm-1500mm

Length

2000mm, 2438mm, 3048mm

Size

1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required

Finish

No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint

Lead time

7 to 15 working days after the receipt

Packing

Wooden pallet or according to customer's request

Application

Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate



Grade

Cu

Ti

AI

P

C

Ni

Cr

Mo

INCOLOY Alloy 825

2

0.8

0.1

-

0.02

42

21

3
GOLD Member
Nov-14-24
 
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase.
The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance.
The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion.



Product name

ALLOY 20 STAINLESS STEEL
Thickness range

0.3mm-3.0mm,

Width range

600mm-1500mm

Length

2000mm, 2438mm, 3048mm

Size

1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required

Finish

No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint

Lead time

7 to 15 working days after the receipt

Packing

Wooden pallet or according to customer's request

Application

Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate



Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
GOLD Member
Nov-14-24
 
Use of INCOLOY Alloy 825: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 �° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.



INCOLOY Alloy 825




Standard

Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249)

Heat exchanger tube: ASTM A249 / ASME SA249, GB / T 24593-2009, HG 20537.2

Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3

Drinking water tube: GB / T 19228

Mechanical tube: ASTM A554, EN 10296-2

Size

Outer Diameter Range: 9.5~2000mm
Thickness Range: 0.5~20mm (Size can be customized.)
Length: Up to 11.8 meters per piece.

Shape Section

Round, square, rectangular





Usage

Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on;

Heat exchanger tube: condenser, boiler, super heater, evaporator and so on;

Industiral pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on;

Mechanical tube: handrail, railings, balustrade, hence and so on.



Features:
1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3�¼m.

2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing.

3. Thick welding, good appearance.The mechanical properties of tube could be tested.

4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015.

5. Full material traceability is guaranteed during the manufacturing process.

6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness.

7. Internal Bore: Tubes have a smooth, clean and crevice free bore.
29382 Iron Cobalt Vanadium Alloy P6 Alloy Suppliers
Short on time? Let Iron Cobalt Vanadium Alloy P6 Alloy sellers contact you.
GOLD Member
Jan-03-25
Supplier From Dubai, United Arab Emirates
 
We supply high-purity Zinc Alloy for industrial applications, ensuring exceptional quality and performance. Our material features a Zinc (Zn) content of 99.999%, with extremely low levels of impurities, making it suitable for critical uses across multiple industries.

Chemical Composition (wt. %):
Zinc (Zn): 99.999%
Manganese (Mn): < 0.001%
Silicon (Si): < 0.001%
Iron (Fe): < 0.001%
Copper (Cu): < 0.001%
Chromium (Cr): < 0.001%
Titanium (Ti): < 0.001%
Aluminum (Al): < 0.001%
Magnesium (Mg): < 0.001%

Applications:
This high-purity zinc alloy is ideal for:
Electronics and semiconductors
Galvanization processes
Specialty coatings
Advanced alloy manufacturing
Research and development

With our stringent quality controls and reliable delivery network, we ensure that your specific requirements are met with excellence. Contact us for further information or to request a quote.
Mar-07-19

Iron Cobalt Alloy Permendur 49

$69.2k
MOQ: Not Specified
Supplier From Xian, Shaanxi Province, China
 
SOFT MAGNETIC - IRON COBALT ALLOY Permendur 49 : (Composition (Nominal): Fe49; V2; Co49:) :(PERMENDUR 49 exhibit the highest magnetic saturation (2.4 T) of all soft-magnetic alloys. high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. : (Specifications: ASTM A801 Alloy Type 1 ; ( Please request a QUOTE for material Datasheet ?
Apr-18-19
 
Name of product : Cobalt Concentrate 10-20% and Cobalt Hydroxide 24-26% and grade 8-10%.

Price of product : LME Cobalt x Co% x payable % on dry basis ex-warehouse Zambia. Exact payable % to be determined for quality required.

Product origin : Zambia

Key Specifications/Special Features

Harmonization System (HS) Code :

Minimum Order Size : 500 mt, but up to 2000 MT per month

Packaging details : Big bags
GOLD Member
Apr-24-22

Ferro Alloys

MOQ: 100  Tons (US)
Supplier From Kolkata, West Bangal, India
 
We also have interest in selling Bulk Ferro Alloys and especially Low/Medium Carbon Silico Manganese and we are already exporting these product/s. We have tied up with a manufacturer bin , Bhutan to sell their products.

Products are:-

Low Carbon Silico Manganese. Typical Specifications are:

Mn: 55 % Minimum
Si: 25-28%
C: 0.2% Maximum
P: 0.15% Maximum
Size: 10-150 MM (90%)

Medium Carbon Silico Manganese. Typical Specifications are: -

Mn: 55%-60%
Si: 22%-25% Max
C: 0.5% Max
Si: 0.05% Max
P: 0.2%-0.40%
Size: 10-150 MM (90%)

For sure, we will be able to meet the requirements, once we get your reply
Mar-07-19
Supplier From Xian, Shaanxi Province, China
 
SOFT MAGNETIC IRON COBALT ALLOY Hiperco 50A ; (Composition (Nominal): Fe49, V2 , Co 49, :)Hiperco 50A Alloy is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (2.4T), high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. :) Specifications: ASTM A801 Alloy Type 1 ;( Product availability and request a QUOTE!
Jan-08-19
Supplier From Trenton, United States
 
F-75 Cobalt bearing sludge

100,000 pounds

More details upon request
Mar-07-19

Nickel Iron Astm F30 Alloy 46

$19.84
MOQ: Not Specified
Supplier From Xian, Shaanxi Province, China
 
ron Nickel alloy ASTM F30 alloy 46 ;( Composition (Nominal) Ni 46 ; Fe Balance: (
Alloy 46 is a nickel-iron controlled expansion alloy containing 46% nickel. It has a fairly constant coefficient of thermal expansion from room temperature up to 500 °C. ; : (SPECIFICATION: ASTM F30
Mar-07-19

Nickel Iron Glass Sealing 42 Alloy

$1.6k
MOQ: Not Specified
Supplier From Xian, Shaanxi Province, China
 
Glass Sealing 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : (
Alloy 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
Mar-07-19
Supplier From Xian, Shaanxi Province, China
 
INVAR 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : (
INVAR 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
Mar-07-19
Supplier From Xian, Shaanxi Province, China
 
IRON NICKEL ALLOY ASTM F1684 INVAR 36 ; (Composition (Nominal): 0.02 C, 0.35 Mn, 0.20 Si, 36.00 Ni, Bal. Fe ; (
Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, making Invar Alloy particularly useful in applications where minimum thermal expansion and high dimensional stability is required, such as in precision instruments like optoelectronic devices, optical and laser benches, electronics, and other kinds of scientific instruments.; ( SPECIFICATION: astm f 1684 ; (Product availability and request a QUOTE!
Mar-07-19
Supplier From Xian, Shaanxi Province, China
 
Iron-Nickel-Chromium alloy NI SPAN C902 UNS N09902 .,;( Composition (Nominal): Ni 43 ., Cr 6., Ti 3. Fe Balance ., :(
Ni-Span C902 nickel iron chromium alloy is precipitation hardenable. It can attain controlled thermoelastic coefficient and static elastic modulus at temperatures from -50° F to 150° F. The main constituents of alloy are iron, nickel and chromium with nominal traces of titanium and aluminum. These elements produce a reddish-brown oxide layer upon exposure to natural conditions since it does not have the same qualities as stainless steel. Additionally, nickel iron chromium alloys feature nominal expansion after hot and cold processing. (Product availability and request a QUOTE!
GOLD Member
May-25-15
Supplier From Varanasi, Uttar Pradesh, India
Supplier Of LPG/LNG & CNG   |   Urea   |   Aluminium Billets

Service Provider Of Importing/Exporting   |   Animal & Cattle Feed   |   Dry Fruits & Nuts   |   Knitted & Woven Garments   |   Towels   |   Copper Millberry Scrap   |   Copper Wire Scrap   |   Wooden Handicrafts   |   Other Handicrafts & Decorative   |   Charcoal   |   Printing Paper   |   Rice   |   Fresh Fruits   |   Marble Handicrafts   |   Aluminum Scrap   |   Food Products   |   Wood Charcoal   |   Fresh Chicken   |   Pesticides   |   Clothing & Accessories   |   Polo Shirts And T Shirts   |   Shirts   |   Bed Linens, Bed Sheets   |   Sandstones & Sands   |   Electrical Household & Other Goods, Components   |   Petroleum By Products   |   Food Processing Machinery   |   DAP (Diammonium Phosphate)   |   Aluminium Scrap   |   Fresh Vegetables   |   Processed Food   |   Livestock   |   Frozen Chicken   |   Brass Handicrafts   |   Shirts & T-Shirts   |   Home Furnishing Textiles   |   Coke   |   Aluminum Ingots   |   Blankets   |   Aluminium Alloy   |   Crude Oil   |   Aggregates   |   NPK   |   Metal Scraps   |   Copper Scrap   |   Animal By Products   |   Heavy Melting Scrap (HMS)   |   Lubricants   |   Wheat Flour   |   Aluminium Balls   |   Copper Ore   |   Beverages   |   Toys & Games   |   Fertilizers   |   Diesel   |   Wires & Cables   |   Resin   |   Handicrafts, Gifts & Decorative   |   Sportswear/Polo Shirts   |   Grains & Cereals
Mar-07-19
Supplier From Xian, Shaanxi Province, China
 
Nickel Iron Alloy 48 UNS K94800/ Nilo 48 ASTM F30 ; ( Composition (Nominal): Ni48 ; Fe Balance ; )Alloy 48 (Nilo 48) is a low expansion Nickel-Iron alloy. The coefficient of thermal expansion of this metal is designed to suit the CTE of soft lead and soda lime glasses. High Inflection point. Its service temperature goes as high as up to 450oC or 840oF. : (Product availability and request a QUOTE!
GOLD Member
May-18-01
Supplier From Bengaluru, Karnataka, India
GOLD Member
VERIFIED
Mar-30-23

Stainless Steel Mill Scale

$220.00
MOQ: 100  
Supplier From Southampton, United Kingdom
 
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.

At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.

The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%


From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:

Waste code: 10 02 10

The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.

Chemical analysis of the material is available on request.
29382 Iron Cobalt Vanadium Alloy P6 Alloy Suppliers
Short on time? Let Iron Cobalt Vanadium Alloy P6 Alloy sellers contact you.