GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
This police vehicle surveillance cctv system includes PTZ camera, mobile MNVR, keyboard controller/joystick, monitor screen/display, and mounting bracket.
1. PTZ camera:
Resolution: 690p/1080p HD IP; optical zoom: 18x, 20x, 30x for choice; Rotation angle: 360 degrees continue; Waterproof rate: IP66; Mounted way: with anti shock base and mounting bracket on roof of vehicle.
2. Mobile MNVR:
This PTZ camera can compatible with SOWZE 4 channels or 8 channels mobile MNVR. The MNVR supports SD card and HDD up to 2TB storage, built in GPS, WIFI, 3G, 4G modules for remote and real time monitoring.
3. Joystick and display:
The joystick is used to control camera PTZ via RS485 with cable. And the display is available with 7inch and 10inch for your choice.
4. Mounting bracket:
Small vehicle roof bar bracket, without shock absorbing seat, suitable for all kinds of vehicle installation, no drilling, easy installation, adjustable height. (Applicable to ordinary small cars, pickup trucks and other light car installation).
1.It could penetrate through the forest and camouflage net compared with other cameras which could not carry out this function.
2.Litter power consumption,and endurable for using,with the farthest radicalization distance,it is up to 200 meters.
3. It could be widely used for the environment such as night,bad environment,and farther range control.
4.Weather proof design,high die-cast aluminum construction,anti-shock,anti-corrosion,the protection grade IP66,with wiper function.
5.360 degree continuously rotation,the range upward angle up to 180 degree,no blind spot.
6.128 [reset positions and with 6 cruising tracks.
7.The power supply AC24V.
Vehicle PTZ camera;
high die-cast aluminum casingï¼?waterproof grade IP66;
selection of high quality infrared light, the irradiation distance is up to 100 meters;
128 preset positions, 6 cruising tracks and 3 self-learning paths;
Pan rotation speed 0~100°/s, tilt rotation speed 0~80°/s
360°continuously rotation, the tilt angle up to 180°, auto flip
Camera position coordination and magnified zoom display function;
it could be widely used for car surveillance at night and bad environment, (especially suitable for monitoring in dark district without light);
power voltage input for car surveillance: DC12V.
built-in surge protection and lightning protection, to effectively prevent 4000v Instantaneous current;
Detection distance: 100M.
Brife Introduction
GST201X is GPRS/GSM Model GPS intelligent terminal (Mobile user terminals) Built-industrial level GPRS/GSM communication module and the newest SIRF-Star III High-sensitivity GPS receiver module positioning, adopts GPRS and SMS Dual-mode communication, terminal run stable and reliable, Function-wide, multi-interface, the terminal can be applied to concrete, rental, logistics, public transport, bus and other fields, but also according to different industries, tailored to different users.
Main Features
1, Terminal dimensions small, waterproof, easy installation;
2, GPS positioning accuracy, dynamic positioning deviation is less than 5 meters;
3, Support for GSM SMS and voice function under, GPRS state of UCP/TCP protocol communications;
4, Support for GPS Data uploaded regularly and named functions;
5, Support for silent features;
6, Remote monitoring capabilities to support authorized;
7, Support the acquisition and high voltage, low voltage protection;
8, Support 3-way high-, low level signal detection;
9, Support blind transfer function up;
10, Car remote lock function;
11, Support the emergency alarm;
12, Support power-off alarm function (built-in backup battery);
13, Support for high-pressure alarm and under voltage alarm;
14, Support speed alarm function;
15, Support the parking alarm;
16, Support the illegal open,illegal start alarm;
17, Support the fatigue driving function;
18, Statistical functions to support mileage;
19, SMS alarm notification;
20, Built-in 16MB Flash, can save 30 thousand blind track data.
Specifications:
3.1, Hardware Datasheet:
Work voltage: 8VDC~36VDC
Work current: 50mA~160mA
GSM module: Simcom300/340
inside contain frequency GSM 900/1800
inside contain frequency GSM 850/900/1800/1900Mhz (can be customized)
Communication protocol: UDP/TCP(can be customized)
GPS module: GPS JRC 595
GPS sensitivity: -159dBm
GPS frequency: L1, 1575.42 MHz
C/A coding: 1.023 MHz chip rate
Channels: 20 channels examine track
Position accuracy: 10 meter, 2D RMS
Speed accuracy: 0.1 meter/second
Time accuracy: GPS time synchronization
Default data: WGS-84
Recover: Average 0.1 second
Hot start : Average 1 second
Warm boot: Average 38 second
Cold boot: Average 42 second
Height limit: 18,000 meter (60,000 feet) max
Speed limit: 515 kilometer/second (1000 knots)max
Acceleration limit: Less than 4g
3.2, Others:
Work temperature: -20~70C
Storage temperature: -30~85C
Humidity: 5% ~95% noncondensing
Terminal size: 101 mm, 50mm, 24mm
Inside battery: Continuous working no less than 4 hours
LED light:
Red: device state; Yellow: GSM module state; Green: GPS module state
Standard Accessories:
Host unit, Power Wires, GPS Antenna, GPRS Antenna, Magic Tape, Warranty Card, Relay, Warranty card receipt, Certification.
Brife Introduction:
GST201X is GPRS/GSM Model GPS intelligent terminal (Mobile user terminals) Built-industrial level GPRS/GSM communication module and the newest SIRF-Star III High-sensitivity GPS receiver module positioning, adopts GPRS and SMS Dual-mode communication, terminal run stable and reliable, Function-wide, multi-interface, the terminal can be applied to concrete, rental, logistics, public transport, bus and other fields, but also according to different industries, tailored to different users.
Main Features:
1. Small and compact size, and easy to install;
2. Accurate GPS positioning dynamic positioning deviation is less than 5 m;
3. In support of GSM voice, SMS functions, and UDP / TCP protocol communications in state of GPRS;
4. Support GPS data uploading at interval and Rollcall function;
5. Support mute function;
6. Support authorized tapping function;
7. Support protection from high or low level voltage function;
8. Support high, low-level signal detection function;
9. Support the data re-sent from signal dead zone function;
10. Support remotely locking vehicle function;
11. Support emergency alarm function;
12. Support the power-off alarm function;
13. Support the high-voltage under-voltage alarm and alarm functions;
14. Support over speed alarm function;
15. Support parking alarm function;
16. Support illegal door-open, illegal engine-start alarm function;
18. Support mileage statistics;
19. Support Geo-fence alarm;
20. Support fatigue driving alarm;
21. Support SMS for alarm notice;
22. Internal flash memory 16MB: When the GST201X is disconnected to the system (for example, the GPRS signal is weak), the position data will be storing in the flash, and then it will upload again after it reconnect to the system (the GPRS signal is ok).
Specifications:
Hardware Datasheet:
Work voltage: 8VDC, 36VDC
Work current: 50mA~160mA
GSM module: Simcom300/340
inside contain frequency GSM 900/1800
inside contain frequency GSM 850/900/1800/1900Mhz (can be customized)
Communication protocol: UDP/TCP(can be customized)
GPS module: GPS JRC 595
GPS sensitivity: -159dBm
GPS frequency: L1, 1575.42 MHz
C/A coding: 1.023 MHz chip rate
Channels: 20 channels examine track
Position accuracy: 10 meter, 2D RMS
Speed accuracy: 0.1 meter/second
Time accuracy: GPS time synchronization
Default data: WGS-84
Recover: Average 0.1 second
Hot start: Average 1 second
Warm boot: Average 38 second
Cold boot: Average 42 second
Height limit: 18,000 meter (60,000 feet) max
Speed limit: 515 kilometer/second (1000 knots)max
Acceleration limit: Less than 4g
Others:
Work temperature: -20, 70 C
Storage temperature: -30, 85 C
Humidity: 5% , 95% noncondensing
Terminal size: 101 mm , 50mm , 24mm
Inside battery: Continuous working no less than 4 hours
LED light:
Red: device state, yellow, GSM module state, green, GPS module state
Standard Accessories:
Host unit, Power Wires, GPS Antenna, GPRS Antenna, Magic Tape, Warranty Card, Relay, Warranty card receipt, Certification.
Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger.
This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications.
Product advantages:
All-in-one design, high integration and space saving installation
Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years
Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability
Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage
BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range
System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell
Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
This vehicle mini IP PTZ camera is available 1.3MP 20X, 2MP 20X and 2MP 30X optical zoom. And it is mostly mounted on top/roof of police car, police vehicle, police truck, military car, military vehicle, patrol car and patrol vehicle with mounting bracket or magnetic base. Following are optional models for your choice:
1)SW-MIP7120M-LA:
1/3" 1.3MP Progressive Scan CMOS;
20X optical zoom (4.7-94mm lens);
Supports ONVIF;
2)SW-MIP7220M-LA:
1/2.8" 2MP Progressive Scan CMOS;
20X optical zoom (4.7-94mm lens);
Supports ONVIF;
3)SW-MIP7230M-LA:
1/2.8" 2MP Progressive Scan CMOS;
30X optical zoom(4.3-129mm lens);
Supports ONVIF;
Functionsï¼?
1)Integrated 16 bit processors, with low power consumption, more stable
2)Built-in high-intensity OSRAM chips, it could achieve the further distance surveillance.
3)Precision 0.9°motor-driven, more stable and low speed control smoothly without jitter.
4)Using industrial-grade components, and it is suitable for bad weather environment.
Featuresï¼?
1)Weather-proof design for car surveillance with special shock absorber
2)With powerful magnet for portable outdoor vehicle monitoring
3)It is suitable for video conference
4)This car PTZ camera integrated with different kinds of HD camera module and HD sensor, achieving HD image capturing.
5)It uses latest H.264 video compression algorithm and DSP processing chip and platform, high compression ratio, with high quality image, and it integrates digital decoder inside.
6)It applies full digital control, flexible programming, drive line compact and simple design, could take rapid positioning and continuous tracking scan, really achieving full range monitoring without blind spot.
7)The maximum resolution to support 960P@30fps
8)Supporting dual stream and HD capture
9)Supporting variety of HD Platform connection
FAQ:
1.What is your MOQ:
Our MOQ is 1pcs, welcome to order sample to test our quality and service.
2.What is your payment term?
We accept PayPal (5% bank charge), T/T bank transfer ($30 bank charge), Western Union and Money Gram.
3.What is your warranty?
1 year of normal use
4.How can I get a sample?
1) choose the item you need and contact our sales for price, shipping and specifications details;
2) if you are agree with our offer, please send us your contact information to make Proforma Invoice;
Our vehicle PTZ camera is mostly used for police car/vehicle/truck, patrol vehicle, military vehicle and lately for robotic surveillance vehicle. It is mounted on top/roof of vehicle with shock absorber base and mounting bracket. Products features: 1) Total metal housing, anti-corrosion/dust/impact; 2) Can be used in any tough environment with sunshade and wiper; 3) Using 2MP/1080p pixels high-definition chipset; 4) Support 30x zoom; 5) Supports 256 preset positions, 6 tour tracks; 6) Can be set to automatically cruise, horizontal scanning, camera mode and title display; 7) PTZ coordinates, lens magnification display function; 8) Built-in OSRAM high-intensity light-emitting chip, to achieve long-range night vision monitoring; 9) Using precision motor drive, low speed & smooth, smooth running without jitters; 10) Adopting industrial-grade components, suitable for all kinds of extremely bad weather; 11) Glass with heating device to prevent from foggy; 12) Built-in temperature control device for a variety of environments; 13) PTZ adopts upright installation, with shock absorber & fixed-point installation, achieving all-day round-the-clock monitoring.Three models for your choice: SW-MIP8120TC-LA: 1/3" 1.3MP 20X optical zoom (4.7-94mm lens); Supports ONVIF; SW-MIP8220TC-LA: 1/2.8" 2MP 20X optical zoom (4.7-94mm lens)
This vehicle ptz security camera is available in IP 960p 20x, 1080p 20x and 1080p 30x. Mounted on top roof of car and vehicle via shock absorber base and mounting bracket. With Xenon light, image/video of this ptz camera is coloured at night; and night vision distance is up to 200 meters. Products features: 1) PTZ camera is designed for using in all environment: with high-strength aluminum alloy casting shell, sun shield and wiper; 2) Thoroughly solve the problem of dark night without lighting conditions, and quickly capture the target; 3) Built-in high power Xenon light, night vision distance up to 200 meters; 4) Horizontal 360 ° infinity rotation, up & down (+90 ° ~ -90 °) without blind spots; 5) Horizontal Preset Speed 100 ° / S, Vertical Horizontal Preset Speed 80 ° / S; 6) Can set 128 preset positions, 6 tour tracks; 7) With the function of north point, the camera is automatically aligned in a direction after reboot; 8) Camera is with automatic thermostat function, automatic heating function, suitable for different environments; 9) Defogging function can be customized; 10) Can be set for automatically cruise, horizontal scan; 11) Can display device coordinate and lens magnification; 12) Configurable shock absorbers for installation; 13) Industrial-grade car power supply circuit design, DC11V-18V wide voltage power supply.
EES All in one system 16KWH LiFePO4 Lithium Battery with AC Charger and 10KW Inverter for solar energy storage application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger.
This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications.
Product advantages:
All-in-one design, high integration and space saving installation
Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years
Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability
Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage
BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range
System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell
Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
682 Intelligent Laser Vehicle Ptz With Defog Suppliers
Short on time? Let Intelligent Laser Vehicle Ptz With Defog sellers contact you.
