InTANK iR2771-S3 has a patented design that allows two 2.5â?� SATA drives to be fitted into one 3.5â?� drive space! Itâ??s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup. iR2771-S3 internal RAID module supports SATA III 6.0 Gb/s host interface and SATA 22 pin power supply; the connectorâ??s location exactly as the same as a 3.5â?� hard drive. Thus, it is not necessary to install any other brackets but just install the iR2771-S3 inside to existing operating system and then the system will be upgraded as a RAID storage! Model no. iR2771-S3 Interface SATA III 6.0 Gb/s Support Hard Drive 2Ã?2.5â?� SATA III 6.0Gb/s HDD/SSD RAID Level RAID 0,1 The Largest Capacity 2TB Power Supply SATA 15pin (12v/5v) LED Indicators Yes Operating System Windows, Linux Function Control Interface GUI (Windows Only) Certification CE & FCC Packing Content Quick Installation Guide, Accessory Kit Dimension 102(W)Ã?26(H)Ã?147(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
InTANK iR2772-S3 has a patented design that allows two 2.5â?� SATA drives to be fitted into one 3.5â?� drive space! Itâ??s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup. RAIDON iR2772-S3 internal RAID module supports SATA III 6.0 Gb/s host interface and SATA 22 pin power supply; the connectorâ??s location exactly as the same as a 3.5â?� hard drive. Thus, it is not necessary to install any other brackets but just install the iR2772-S3 inside to existing operating system and then the system will be upgraded as a RAID storage! iR2772-S3 provides RS232 port, user can monitor the status of the system via their own program. Model no. iR2772-S3 Interface SATA III 6.0 Gb/s Support Hard Drive 2Ã?2.5â?� SATA III 6.0Gb/s HDD/SSD RAID Level RAID 0,1 The Largest Capacity 2TB Power Supply SATA 15pin (12v/5v) LED Indicators Yes Operating System Windows, Linux Certification CE & FCC Function Control Interface GUI (Windows Only) Packing Content Quick Installation Guide, Accessory Kit Dimension 102(W)Ã?26(H)Ã?157(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
iT4300-S3 is an 4 bays internal storage solution for 5.25-inch CD-ROM. Using the JBOD function enables you to store the operating system and data file in different hard disk space. The advantage of storage distribution can help to enhance the performance of system operation. RAIDON also delivers iT4300-S3 with only JBOD function to mini SAS to 4*SATA cable, users may collocate a RAID card whenever is necessary to upgrade to a RAID storage for desired applications. Model no. iT4300-S3 Interface miniSAS 6G TO 4 Port SATA Support Hard Drive 4x 2.5" SATA SSD/HDD(15mm) RAID Level JBOD System Monitoring Fan Failure / Overheat (alarm) The Largest Capacity 2TB Cooling Fan 4 cm Power Supply 15-pin Power Connector LED Indicators Yes Operating System Windows 7 or above, Linux Certification CE & FCC Product Code EAN:4711132864434 UPC:884826503576 Packing Content iT4300-S3 (with removable drive tray enclosed x 4), Quick Installation Guide, Screws & Keys, miniSAS 6G TO 4 Port SATA Internal Cable Dimension 146(W)x 42(H) x 153(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
The RAIDON iR2623-S3 is a fault-tolerant hard disk array which is easy to install and hot-swappable allowing drives to be replaced while the power is on. It is suitable for applications such as professional workstations, file servers and as real-time backup storage systems. The iR2623-S3â??s disk array is made up of two 3.5" hard disks, augmented by a 2.5" hard disk or SSD extractable tray with a separate SATA interface to diversify usage. The iR2623-S3 is a dual function storage device, offering data security and removable storage for on the go data transport. Model No iR2623-S3 Interfaces 6Gbps SATA III 1 Ports ( 3.5" RAID Module ) / 6Gbps SATA III 1 Ports ( 2.5" HDD/SSD ) Compatible Drive 2 x 2.5"/3.5" SATA III (6.0 Gbits) HDD/SSD + 1 x 2.5" SATA III (6.0 Gbits) HDD/SSD Storage Mode RAID 1 or RAID 0 ( 3.5" RAID Module ) +Independent volume( 2.5" HDD/SSD ) Operating System Windows, Linux Function Control Interface GUI (Windows Only) Electrical and Operating Requirements * Line voltage: 12V + 5V DC * Maximum continuous power: 60W * Operating temperature: 32° to 104° F (0° to 40° C) * Storage temperature: -4° to 116° F (-20° to 47° C) * Relative humidity: 5% to 95% noncondensing Size and Weight 148 mm (W) x 84 mm (H) x 202 mm (D) , 1.2 Kg Product Code EAN:4711132864984 UPC:884826503668 Carton 8 pcs per carton Package Accessories * iR2623-S3 x 1 * SATA Cable x 2 * Internal RS232 cable x 1 * External RS232 cable x 1 * Accessory kit * Quick Installation Guide
iT2771-S3 JBOD mode could use both of 2.5" HDD/SSD products and extensively use in various storage requirement iT2771-S3 uses our screwless tray which provides an easy use Tray Lock to protect your data. You could easily replace the defective HDD from its easy-to-use tray design even though you haven't got any experience in doing that before. Model no. iT2771-S3 Interface SATA III 6.0 Gb/s Support Hard Drive 2�2.5� SATA III 6.0Gb/s HDD/SSD RAID Level JBOD The Largest Capacity 2TB Power Supply SATA 15pin (12v/5v) LED Indicators Yes Operating System Windows, Linux Certification CE & FCC Packing Content Quick Installation Guide, Accessory Kit Dimension 102(W)�26(H)�147(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
Item No .: 7198 - 397 NR Size : 39 - 48 (5-14) SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Breathable Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 SRA Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198-397 Nr Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Single Color : Single AVAILABLE OPTIONS Product Number : 7198-397 Nr Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Single Color : Single BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3003-301 Size : 36 - 48 Soles : 3003 Double Density PU sole SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Gents Safety Shoes Standard : S1 Sizes : 36 - 48 Colors : White AVAILABLE OPTIONS Product Number : 3003-301 Standard : S1, S1P, S2, S3 Toe : Steel /fibre Glass Midsole : Steel/metal Free Sole : Dual / Mono Color : Black /brown AVAILABLE OPTIONS Product Number : 3003 - 301 Standard : S1, S1p, S2, S3 Toe : Steel /fibre Glass Midsole : Steel/metal Free Sole : Dual / Mono Color : Black /brown BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet.
Item No .: 2080 - 62 Size : 36 - 47 (5-13) Soles : 2080 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 47 (5-13) Colors : Black AVAILABLE OPTIONS Product Number : 2080 - 62 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Nubuck Lining : CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Toe : Steel Midsole : Steel Footbed / Socks : Felt Antistatic Sole : 2080 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3003 - 52 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-52 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole: Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Nubuck Lining : Soft Fur, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions
Item No .: 7198-354 Size : 39 - 48 (5-14) Moq : N/A Soles : 7198 Dual Density PU SEND ENQUIRY SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198 - 354 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Smooth Haircell & Helcore Lining : Soft Buff Leather White Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 7198 Dual Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3003-100 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-100 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper: Water Resistant Printed Leather Lining : Soft Fur, Abosrbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 2080 - 190 Size : 36 - 47 (5-13) Moq : N/A Soles : 2080 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 47 (5-13) Colors : Black AVAILABLE OPTIONS Product Number : 2080 - 190 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Smooth Haircell Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 2080 Dual Density PU CERTIFIED: EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED *Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and com
Item No .: 3003-25 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Oil Resistant Shock Absorber Steel Midsole Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003 - 25 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Suede and Cordura Lining : 3D Textile, Breathable, Ensures good Ventilation and greater comfort Toe : Composite Midsole : Non Metallic -Zero Penetration Footbed / Socks : Cambrella and EVA Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 3003-34 Size : 36 - 48 Moq : N/A Soles : 3002 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Oil Resistant Shock Absorber Steel Midsole Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 Sizes : 36 - 48 Colors : Blue AVAILABLE OPTIONS Product Number : 3003-34 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual Or Mono Color : As Per Pic MATERIALS Upper : Water Resistant Suede and Breathable Textile Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Composite Midsole : Non Metallic -Zero Penetration Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 3002-02 Pu/rubber Size : 36 - 47 (5-13) Soles : 3002- PU Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Gents Safety Boots Standard : S3 Sizes : 36 - 47 (5-13) Colors : Brown/black AVAILABLE OPTIONS Product Number : 3002-02 PU/Rubber Standard : S1,s1p,s2,s3 Toe: Fibre Glass/steel Midsole: Steel/kevlar Sole : DD PU/Rubber Color: Brown & Black MATERIALS Upper: Water Resistant Buff Printed Leather Lining: Camberella - 100% Camberella Polymide,breathable,absorbing And Relaxing Moisture Toe : Fibre Glass Midsole : Kevlar Footbed / Socks: Moulded Antistatic Sole : 3002- PU Rubber Certified : EN ISO 20345:2011 SRA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3002-02 Size : 36 - 47 (5-13) Soles : 3002 Double Density PU /Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Gents Safety Boot Standard : S3 Sizes : 36 - 47 (5-13) Colors : Brown AVAILABLE OPTIONS Product Number : 3002-02 Standard : S1, S1P, S2, S3 Toe : Steel /Fibre Glass Midsole : Steel/Metal Free Sole : Dual Color : Black / Brown MATERIALS Upper : Buff Barton Printed Din Leather +PU Coated Synthetic on Collar and Tongue Lining : Cambrella Toe : Fibre Glass Toe Midsole : Kevlar Footbed / Socks : Moulded Antistatic Sole : 3002 Double Density PU /RUBBER Certified : EN ISO 20345:2011 SRA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 7198-398 NR Size : 36 - 48 Soles : 7198 Nitrile Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Breathable Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sra Sizes : 36 - 48 Colors : Black / Brown AVAILABLE OPTIONS Product Number : 7198 - 398 Nr Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Single Color : Black / Brown MATERIALS Upper : Buff Barton Lining : Textile Toe : Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole : Single Density Nitrile Rubber Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 7198-01 NR Size : 39 - 48 (5-14) Soles : 7198 Nitrile Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Breathable Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 SRA Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198-01 Nr Standard : S1, S1p, S2, S3 Toe : Steel Midsole : Steel Color : Black / Brown MATERIALS Upper : Buff Barton Lining : Cambrella Toe : Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole : Single Density Nitrile Rubber Certified : N/A BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 3003-01 Size: 36 - 48 Soles : 3003 Dual Density SAFETY FEATURES Abrasion Resistant Anti Skid Anti Static Insole Breathable Fine Leather Heat Resistant Sole Light Weight Oil Resistant Shock Absorber Steel Midsole Steel toe / Kavlar Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 SRC Sizes : 36 - 48 Colors : Black / Brown AVAILABLE OPTIONS Product Number : 3003-01 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Kevlar Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Buff Barton Lining : Cambrella Toe : Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole : Double Density PU/PU Certified : EN 61340-4-3:2002 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 7198-330 Size : 39-48 (5-14) Soles : 7198 Dual Density SAFETY FEATURES Anti Skid Anti Static Insole Heat Resistant Sole Oil Resistant Shock Absorber Steel Midsole Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Clog Standard : S3 Sizes : 39 - 48 (5-14) Colors : Black / Brown AVAILABLE OPTIONS Product Number : 7198 - 330 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Printed Leather Lining : CAMBRELLA 100% polyamide, Breathable, absrobing and releasing moisture, Abrasion Resistant , Odour free, Antibacterial Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 7198 Dual Density Certified : EN 61340-4-3:2002 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet 100% COMFORT GUARANTEED *Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions