1.Total Thickness:16mm/18mm/20mm/25mm/50mm 2.Surface material:galvanized steel plate-0.25mm / 0.27mm 3.Mid content material:polyurethane sandwich foam 4.Back material:aluminum foil cloth
PU Sandwich Wall Panel Product description: the surface of the metal carved board/panels(metal engraved board/panels) is a high-quality metal plate overcoating with colored relief after special coating treatment, the middle layer is a hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment, the underside is the aluminum foil protective layer which plays the role of thermal/heat insulation and moisture-proof. the wall panel has the characteristics of thermal insulation, waterproof and flame-retardant, light earthquake resistance, sound insulation and noise reduction, green environmental protection, beautiful and durable, and the assembly method of the board body is simple, convenient construction, and it is not limited by the season or environment, the four seasons are appropriate. Structure: Material of surface: the outer layer is a metal layer, which is pressed by a galvalume steel sheet (Containing 55% aluminum, 43% zinc) and is not rusted all year- round. the steel coating is coated with high-quality Nippon paint, which is durable and does not fade. Core material: the hard high-density polyurethane foam thermal insulation layer treated by flame retardant treatment, set heat preservation, fire-proof, moisture-proof, high hardness in one, which is incomparable with ordinary foam polyurethane. Material of bottom: the back of the metal carved board is the aluminum foil protective layer with excellent water-proof performance, which can effectively block the intrusion of water vapor into the board and build a wall, and reflect the heat source of the house to enhance the heat preservation effect.
Brown Sand Roll Earthy Yellow PU Sandwich Wall Panel Product description: the surface of the metal carved board/panels(metal engraved board/panels) is a high-quality metal plate overcoating with colored relief after special coating treatment, the middle layer is a hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment, the underside is the aluminum foil protective layer which plays the role of thermal/heat insulation and moisture-proof. Advantage: 1. Heat preservation and heat insulation: the metal carved board has excellent heat preservation and heat insulation performance, can greatly reduce the heating and cooling energy consumption, and save energy expenditure, compared with the traditional exterior wall heat preservation materials, the product cost performance is higher. 2. Fire and flame retardant: the surface of the board is made of a metal layer with special technology, and the inner core is made of hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment. The bottom layer is fireproof and moisture-proof fiber cloth, which makes triple protection more secure. 3. Waterproof and moisture-proof: Metal carved board has an excellent own structure and compact concave-convex bump plug between the board and groove type installation, it can avoid structural damage caused by rain, snow, freezing, melting, etc. It can eliminate the possibility of wall water seepage after installation. 4. Sound insulation and noise reduction: 5. Efficient construction: the installation method of the metal carved board is simple and fast, regardless of being limited by seasonal climate and geographical environment. It can obviously shorten the progress of the project, save the construction cost and reduce the overall cost. At the same time thermal insulation, minimizes the load on the exterior walls and increases the availability of space and land. 6. Environmental protection and durability: the metal carved board has a stable chemical and physical structure, it does not decompose and mildew, and it has no radiation and no pollution to our environment. It also can be flexible disassembly for reinstalled and reused, its scraps can also be recycled and reused, the construction waste will be reduced in the installation process, and easy to clean and durable. 7. Shock resistance and crack prevention: the metal carved board is light in weight, high in strength, and good in impact resistance. the advantages of light weight, not only reduce the burden of the building itself, but also greatly reduce the impact of the earthquake on the building. the board is installed in the lightweight steel structure of the building and has strong integrity, anti-knock and anti-crack, which performs strongly and is high in safety.
The source of the production raw materials is widely with no regional restriction.The product is made of cement, foam, many kinds of crop straw and norganic material (such as talcum powder, infusorial earth and powder coal ash) after special technology. So this project have low production cost, small investment and fast effectiveness.
surface material The high quality metal plate after the special coating and embossed finish pressing treatment . core material : Rigid high-density pu foam thermal insulation layer with fire-retardant treatment bottom side material Aluminium foil protective layer with the function of insulation and moisture proof
XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations. B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.
"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
Aluminum composite panel There are also five kind of finishes : --Metallic Colors -- Solid Colors -- Stone/Timber finish -- Mirror Finish -- Prismatic Pearlized Size: --Standard Width : 1220 mm,1250mm -- Available Widths : 1000,1220, 1250,1300,1500, 1550,1560 mm -- Standard Length : 2440, 3200, 4500 mm -- Available Lengths : Any length up to 6000 mm --Available Thickness : 2mm, 3mm, 4mm, 5mm, 6mm --Available Aluminium Thickness: 0.05mm--- 0.5mm After Sale Service: PVDF Coating ACP:We offer 20 years guarantee PE Coating ACP: We offer 7~13 years guarantee Claim: Pls contact our After-sale service department within 60 days after you receive the cargo Process: If the quality meet any problem, pls provide us the photos which describe the problem Solutions A: If the problem is small, we will send the same quantity free in new shipment B: If the problem is big, here will have the technical personnel comes to the construction site,check and assessment ,except the goods value, we will pay for all installation charges for these problem panels But we keep the quality always. Will not let this problem come appear Each claim, you can call our 24 hours Tel No. 0086-2816311608 directly Packing1:Wood box(pallet, strap, top/sides protections), NO LOOSE.Conveyance (qty/20' GP): 1) 4mm: 3500sqm 2) 3mm:4500sqm Packing2,: nakedness packig 1)4mm:4500sqm 2)3mm:6000sqm
The surface material is galvanized steel plate, the middle layer is a polyurethane sandwich layer, B2 grade fireproof, and the back material is aluminum foil cloth. The metal surface is treated with anti-rust and anti-corrosion, which is environmentally friendly, pollution-free, and tasteless. Light weight, convenient transportion and easy installation.
Wall panels.
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other. Max size :3300*12000mm Main character : Energy saving , improving the thermal performance Sound insulated Security and comfort Component : 1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application 2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material . The spacer width usually from 6mm-18mm.
Composite panels Size: 4000*375*15mm Pack: 13 pieces Weight: 32kg/pack
Insulation Wall Panels.
Control Panel
Eps sandwich panel Krs eps sandwich panels are of 1 meter width and up to any desired length as per requirement. Sandwich panels are the most appropriate construction material for making site office, pharmaceutical laboratory & storage rooms, ware houses, sensitive laboratory, ice-cream factory and low-cost houses, cold rooms, steel structure building and many more. We are also offering boundary fences made of eps sandwich panel which is cost effective on the other hand less time consuming as well. The advanced eps sandwich panels are of any color depending on customers¡¯ requirement & preferences. . Eps sandwich wall panels: Effective width: 950mm, 1000mm/1150mm Length: as per client¡¯s requirements & application. Eps density: 8-35 kg/m3 Thickness of steel sheet: 0.25-0.7mm Thickness of eps foam: 30mm-200mm. Color of steel sheets: according to ral color reference Eps sandwich roof panels: Effective width: 950mm, 970mm, 980mm Length: as per clients requirements Core material: eps foam Eps density: generally 8-35 kg/m3. It can be customized as per clients requirements Thickness of steel sheet: 0.25-0.7 mm Thickness of eps foam: 30mm-200mm Color of sheets: according to ral color reference. Pallet
A traditional roofing material of the Pacific Islands and Australasia, which is made from dried tropical grasses which are woven together and then bunched. Cogan Grass thatch is particularly dense so covers well and comes in rolls making it a simple and economical solution for circular roofs.
Corner fittings for ceiling access panels ( With Powder coated RAL 9016 / Mill finish). With 10 pcs fittings, 2 push locks, 4 screws, 1 Hook with chain & Aluminium Sheath, 8 PVC Rubber Screw caps.
M. Green rustic 600x150mm - Natural South Slate Wallpanel
High flexibility, fit all kinds of roofing. Covenient installation and transportation, saving a lot of costs. Lead-free environmental protection, green photovoltaic concept. Lightweight ultra-thin design to meet project needs. It can be customized to meet various scenarios. High reliability in harsh environment testing.
PU Outstanding performance 1.High thermal insulation effect There are numerous blast holes insidethe rigidPUfoam. They are interconnected and uniformly distributed to absorbor block sound. So thereis a verygoodsound isolation, which can provide quietand comfortableindoor environment. 2.Great bonding strength The rigid PU foam has excellentbindingforce. It can bond well with cement, steel material, clay, pitch, wood, glass, plastic and other materials. The bonding strength is greater than the crack-resistant strength itself, which is in accordance with Chinese technology requirements for exterior wallthermal insulationprojects. 3.Largecompression The rigid PU foam has gooddimensional stability. Itsdeformationresistantcapabilityis excellent and can not crack especially under the outside force, temperature, moisture, dryness and other negative factors. This helps to ensure the whole stability and durability. 4.Good weathering resistance and long service life Materialized rigid PU foam can be used for 30 years under 130 normally, and can reach 70years under 50.
