Insulated Piercing Connector Pct Series Suppliers and Manufacturers

Product description: Purpose of insulation piercing connectors(ipc) is to connect main and one(pc13), two(pc24) tap conducor's of section, how is written on ipc body.Type without letter b serves to connect isolated conductors, with letter b bare conductors.Ipc for one tap conductor is equipped with cable termination cap pcec16/120, for two output wires-no cap. Ipc consists from two glass-fiber reinforced plastic parts, which are fited with two brass tinned teeth's, which are coated with uv-curing silica grease and the teeth are fitted with rubber insulation.This set is associated with the bolt, nut and pinch fixation segment.The terminals marked t are equipped with tear head. The lower part of the clamp is designed to be hold by the key 17 and the ventilation chamber, providing optimal ventilation of ipc. Product can be also used as tap connector inside low boltage boxes. Product range: Pct13 150/150 re/rm, isolated 6-150mm /isolated 6-150 mm, cu/al. Pct13c 120/10 re/rm, isolated/bare 1.5-10mm / isolated/bare 6-120 mm, cu/al. Pct13c 70/35 re/rm, isolated 6-70mm / isolated 4-35 mm, cu/al. Pct24 120/120 re/rm, isolated 6-120mm / isolated 6-120 mm, cu/al. Pct24 240/150 re/rm, isolated 95-240mm / isolated 16-150 mm, cu/al Pct13b 150/150 re/rm, bare 6-150mm / isolated 6-150 mm , cu/al. Pct13cb 120/10 re/rm, isolated/bare 1.5-10mm / isolated/bare 6-120 mm , cu/al. Pct13c 70/35 re/rm , bare 6-70mm / isolated 4-35 mm , cu/al. Pct23c 185/185 Pct24b 120/120 re/rm, bare 6-120mm / isolated 6-120 mm , cu/al. Pct24b 240/150 re/rm, bare 95-240mm / isolated 16-150 mm , cu/al. Used materials: Uv&fire resistant pa66, pvc, dacromet or h.D.G(optional)finished steel, tinned copper. Variants: The product is manufactured and supplied in modification's as is showed upwards in product range. Storange and transport: Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous. Standard package

Ipc series insulation piercing connectors Piercing connector, simple installation, need not strip the cable coat. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. Adopted special connecting table, apply to joint of cu(al) and cu(al) or cu and al. Small electric connecting resistance, impulse current can be up to 15ka. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kv. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (1.5-240mm2) Packaging by cartons

Conductor Range(mm2) Model No. Main Tap Bolt No. TTD121F95-2525-2.5 1 TTD151F95-2535-2.5(6) 1 TTD201F95-3595-25 1 TTD281F185-5012936 1 TTD282F95-252Ã?(35-2.5) 1 TTD451F240-95 240-95 1

Naixiang also has a wide range of production capabilities to include but not limited to, hot forming, cold forming, injection molding, casting, hot forge, cold forge, stamping, and many more. We are also able to offer secondary machining and assembly as needed. Naixiang also has a wide range of production capabilities to include but not limited to, hot forming, cold forming, injection molding, casting, hot forge, cold forge, stamping, and many more. We are also able to offer secondary machining and assembly as needed

Da 2-95 Main line; 16-95sqmm Branch line: 4-35/50sqmm. mainline:insulated Cu or Al tap:insulated Cu or Al 1.Using corrosion-resistant shell, Anti-climate change, high-intensity ultraviolet insulation materials 2.Constant puncture fastening torque nut is installed more simple, safe, fast. 3.Extension puncture site and contact with senior waterproof cover functions (IP27), the water pressure of 6 KV 4.Extension Cover may as required under extreme left or right side. 5pcs/box 20box/carton.

Qucik detail Place of Origin Zhejiang, China Brand Name CROP Model Number Insulation piercing connector Product name insulation piercing connector IPC connector Sample Free Material Plastic Company website www.cropgroupcn.com Quality Prime Installation Quick Certifications ISO9001 OEM Acceptable Export All over the world Business Type Manufacturer Insulation Piercing Connector for Street Lighting MODELS MAIN LINE (MM2) SERVICE LINE (MM2) BOLT NO. TORQUE REMARKS PCT13C 95/10 6-95 1.5-10 1 10NM ISO to ISO PCT13CB 95/10 (B)6-95 1.5-10 1 10NM ISO to Bare PCT13C 120/10 6-120 1.5-10 1 10NM ISO to ISO PCT13CB 120/10 (B)6-120 1.5-10 1 10NM ISO to Bare Piercing Connector for Low Voltage Aerial Bundled Cables MODELS MAIN LINE (MM2) SERVICE LINE (MM2) BOLT NO. TORQUE (NM) REMARKS PCT13C 70/35 16-70 4-35 1 15NM ISO to ISO PCT13CB 70/35 16-70 (B)4-35 1 15NM ISO to Bare PCT13C 95/50 16-95 4-50 1 17NM ISO to ISO PCT13CB 95/50 16-95 (B)4-50 1 17NM ISO to Bare PCT13C 120/25 25-120 6-25 1 17NM ISO to ISO PCT13C 150/50 50-150 4-50 1 17NM ISO to ISO PCT13C 185/35 50-185 6-35 1 17NM ISO to ISO MODELS MAIN LINE (MM2) SERVICE LINE (MM2) BOLT NO. TORQUE (NM) REMARKS PCT13C 95/95 16-95 16-95 1 17-23NM ISO to ISO PCT13CB 95/95 16-95 (B)16-95 1 23NM ISO to Bare PCT13C 150/150 16-150 16-150 1 23NM ISO to ISO PCT13CB 150/150 16-150 (B)16-150 1 23NM ISO to Bare MODELS JBC-0 JBC-1 JBC-2 PCT23C 240-240 Main Line(mm2) 25-70 35-70 35-150 50-240 Service Line (mm2) 6-35 6-35 35-150 50-240 Bolt No. 1 1 1 2 Torque (Nm) 10NM 13NM 17NM 23NM Remarks ISO to ISO ISO to ISO ISO to ISO ISO to ISO

This type insulation piercing connectors are suitable for all types of LV-ABC conductors as well as connections to service and lighting cable cores. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Stripping of insulation is avoided. Suitable for aluminum and copper conductors and components not losable, end cap attached to body, Insulation material made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel. insulation piercing connector

Customized Insulation Piercing Connector Customized Flameproof Insulated Piercing Connector Insulation Piercing Connector for Insulated Overhead Lines 1kV Insulation piercing grounding connectors (CONWELL type) selection table Type (mm2) Main Line Section (mm2) Branch Section Bolt Quantity (pcs) KWLW-1 5-120 35-70 1 KWLW-2 35-70 16-35 1 KWLB-1 16-95 16-95 1 KWLB-2 1 KWDM-1 16-120 4-35 1 KW4-150-2P 16-150 16-150 2 KW2-95B 16-95 4-50 2 KW4-150A 16-150 16-150 2 lation piercing connector(IPC) 1. Piercing connector, simple installation, need not strip the cable coat. 2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001. 6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV. 7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td) Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc. Performance testing 1. Mechanical performance: the grip force of the wire clamp is 1/10 bigger than the break force of the lead, It comply with GB2314-1997. 2. Temperature rise performance: under the condition of big current, the temperature rise of connector is less than that of connection lead. 3. Heat circle performance: conforms to GB/T2317.3-2000, the heat circle trial standard for electric fitting. 4. Waterproof insulation performance: conforms to the relevant testing requirements in Part 2 of GB/T13140.4-1998. 5. Resistance to corrosion performance: under the condition of SO2 and salt fog, it can do three times of fourteen days circle testing. 6. Environmental aging performance: under the circumstance of ultraviolet, radiation, dry and moist, expose it with change of temperature and heat impulse for six weeks. 7. Fire-proof performance: insulation material of the connector withstands glowing filament test. Conform to the requirements in Chapter 4-10 of GB/T5169.4. -

1. Piercing connector, simple installation, need not strip the cable coat. 2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001. 6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV. 7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td) Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc. -

Model No.: IPC3.2 Main conductor Range: 95-70mm2 Tap Conductor Range: 95-70mm2 Bolt no.: 1 Color: Black

1. Puncture strunctre, torque nut to ensure the puncture pressure and it's easy to fix. 2. Pressunized struncture, corrosion protection, and have a long service life. 3. Small contact resisance, and low termperature rise. 4. Different pathway wire connected, widely used. 5. Good insulation performance, 1kv withstand voltage is bigger than 4kv, 10kv withstand voltage is bigger than 18kv. Specs: Be applicabe Voltage(kv) typemain wirebranch wire number of boltstoeque valuedimensions(mm) hbl 1kv Jbc15~25/1.5~10 1.5~251.5~10 113452760 Jbc16~70/4~15 16~70 4~25125525285 Jbc16~70/16~70 16~70 16~70125525285 Jbc16~95/4~3516~95 4~35 125604585 Jbc25~95/25~95 25~95 25~95 125655685 Jbc50~120/16~50 50~120 16~50125565485 Jbc50~120/50~12050~12050~120125605485 Jbc50~150/6~3550~1506~35125604585 Jbc50~150/50~15050~15050~150225675895 Jbc95~240/95~24095~24095~240225776795 Jbc120~240/25~120120~24025~120225676395 Jbc120~240/70~120120~24070~120225786095 Jbc120~240/120~240120~240120~240225806495 10kvjbc10-010~2510~252309573115 Jbc10-125~5025~502309573115 Jbc10-270~12025~502309578115 Jbc10-370~12070~1202309578115 Jbc10-4150~24070~1202309589115 Jbc10-5150~240150~2402309586115 Jbc10-6150~24025~502309586115

Place of Origin Hebei, China Color -Black Product name -Insulation Piercing Connectors Model Number -TH,ipc,jbc,ttd Teeth Material -Aluminium , Brass or Copper Material -PA66 Connector type -Piercing clamp Application -Power electric Withstand Voltage -Low Voltage Package -Package Others -OEM Service Offered

Place of Origin -Hebei, China Color -Black Product name -Insulation Piercing Connectors Model Number -TH,ipc,jbc,ttd Teeth Material -Aluminium , Brass or Copper Material -PA66 Connector type -Piercing clamp Application -Power electric Withstand Voltage -Low Voltage Package -Package Others -OEM Service Offered

Keeps good conduction without any damage resistant to effusion can resistant to 4KV 1 min in water 1 Has piercing structure, need not strip the connector over 2 Takes small installation space,easily installed 3 suitable for bridge,overhead line and underground 4 Can used in between below 50 degrees and 150 degrees Materials Body: Nylon 66 Teeth/blade : copper tinned Bolt: Hot dip galvanized Sheer head : Zinc alloy Parameters KTEP:main:16-95mm2/1.5-10mm2 Packing:300pcs/CTN

Material 1.Body Material : UV-resistant plastic 2. Nut Material : Hot-dip galvanized steel 3. Teeth material: Cu or AL

0.6-1KV Insulation Piercing Connectors Jma Insulation Piercing Connector / Insulation Piercing Clamps (IPC) Hot Sale Overhead Line Insulation Piercing Connector 1kV Insulation piercing grounding connectors (CONWELL type) selection table Type Equivalent Type (mm2) Main Line Section (mm2) Branch Section (a) Norminal Current (mm) Dimensions (g) Weight (mm) Piercing Depth Bolt Quantity (pcs) KW756 JJC888 0.75-6 0.75-6 41 21Ã?27Ã?23 10 1-1.5 1 KW101 JJC-1 1.5-25 1.5-10 55 27Ã?41Ã?62 55 1.5-2 1 KWEP JJC-2 16-95 1.5-10 55 27Ã?41Ã?62 55 1-2 1 KW102 JJC-3(B) 6-50 4-25 157 42Ã?45Ã?62 110 2.5-3.5 1 KW2-95 JJC-3 16-95 4-35(50) 157 46Ã?52Ã?87 160 2.5-3.5 1 KW2-150 JJC-4 50-150 6-35(50) 157 46Ã?52Ã?87 162 2.5-3.5 1 KW3-95 JJC-5 25-95 25-95 214 50Ã?61Ã?100 198 3-4 1 KW4-150 (old) JJC-6 (35)50-150 (35)50-150 316 50Ã?61Ã?100 219 3-4 1 KW4 -150(new) JJC-6 (35)50-150 (35)50-150 316 50Ã?61Ã?100 280 3-4 1 KW6 JJC-7 120-240 25-120 276 52Ã?68Ã?100 360 3-4 1 KW7 - 150-240 10-25 102 52Ã?68Ã?100 336 3-4 1 KW240 (old) JJC-8 95-240 95-240 425 83Ã?130Ã?130 1020 4-5 2 KW240 (new) JJC-8 95-240 95-240 425 68Ã?68Ã?110 580 4-5 2 KW300 300 25-95 425 83Ã?130Ã?130 1040 4.5-5.5 2 95-240 KW400 400 25-95 425 83Ã?130Ã?130 1050 5-6 2 -

Fire-retardant Insulation Piercing Connectors Factory Direct Sales Plastic Fire-Retardant Insulation Piercing Connectors for ABC Cable Electric Fire Retardant Insulation Piercing Connector Insulated Clamp Electric Fire-Retardant Insulated Piercing Connector for ABC Cable Fire-retardant Insulation Piercing Connectors(CONWELL Type) Selection table Please phone us for special specification and type. General of insulation piercing connector(IPC) 1. Piercing connector, simple installation, need not strip the cable coat. 2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001. 6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV. 7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td) Sali For Sale Piercing Connector, Metal Anchor Clamp, Insulation Piercing Connectors, Eye Bolt, Guy Attachment, Plastic Anchor Clamp etc. -

10KV Insulation Piercing Grounding Connectors 10kv Insulation Piercing Ground Connector / Earth Wire Clamp 10kv High Quality Insulation Piercing Grounding Connectors 10kV Insulation piercing grounding connectors (CONWELL type) selection table It is suitable for 10kV overhead insulated wire grounding protection and temporary electrical inspection. Type Equivalent Type (kV) Applicable Voltage (mm2) Applicable Wire (mm) Main Size (A) Nominal Current (æ??) Bolt Quantity (pcs) (mm) Piercing Depth ABH KWF10-240/150 JJCD10-150-240 10 150-240 160140112.5 476 2 4-5 KWF10-185/95 JJCD10-95-185 10 95-185 152140112.5 476 2 4-5 KWF10-95/25 JJCD10-95-25 10 25-95 144.514092.5 257 2 4-5 KWF10-120/35 10 35-120 14812086 316 2 3-4 KWF10-95/25 10 25-95 154120110 276 1 3-4 Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc. Sali is a set research and development, manufacturing, sales and service in one, with international competition industry suppliers. -