Injection Packer Suppliers and Manufacturers

Injection packer is a must in chemical grout used for injection of epoxy and polyurethane foam into holes penetrated at a pressure higher than 20kg/cm(max. Pressure 500kg/cm) on to concrete structure. The injection packer is a tool for sealing works. It is tightly fixed in the drill hole of the building component and connects the injection device with the building. Under pressure the sealing material is injected into the damaged building component. Packers are made of different materials such as steel or plastic and various types of packers are available. The head is provided with a one-way valve, can prevent the slurry at high pressure into the pour spout. It is widely used with high pressure grouting machine.

Injection packer is a must in chemical grout used for injection of epoxy and polyurethane foam into holes penetrated at a pressure higher than 20kg/cm(max. Pressure 500kg/cm) on to concrete structure. The injection packer is a tool for sealing works. It is tightly fixed in the drill hole of the building component and connects the injection device with the building. Under pressure the sealing material is injected into the damaged building component. Packers are made of different materials such as steel or plastic and various types of packers are available. The head is provided with a one-way valve, can prevent the slurry at high pressure into the pour spout. It is widely used with high pressure grouting machine.

Shenglong Injection packer for high pressure grout Features High pressure injection packers for concrete crack repairs , waterproofing ,rehabilitation of concrete structures , basement leak sealing cracksealing etc. Shenglong injection packer for injection machine spare parts is uesd with the Shenglong injection machine in concrete crack repair and water leaking stop. It suits for both polyurethane and epoxy injection. Method of Construction for Injection 1.Crack and leakage condition inspection Check the process procedure after finding the thickness, width and depth of crack and leakage condition of the structure 2.Drilling Operation Drill directly into crack section if the thickness of concrete is thinner than 10cm. For the thickness of 10~50cm, drill it with 45 degree angle by keeping a distance of 1/5 of concrete thickness. Make sure it penetrates the crack section. If the thickness is over than 50cm, keep the distance of 20~30cm and drill it with 45 degree angle until it penetrates crack section. And keep drilling by maintaining the fixed interval. (5 holes per 1 meter. Drill it in zigzags) 3.Packer Installation Clean the inside of drilled holes with compressor. Make sure that rubber sleeve of packer and cutting line of tightening nut should be put into the inside of concrete surface when installing. Tighten the packer completely by using the T-box. (Packer might be damaged if you tighten it too strongly) 4.Injection Operation Inject the waterstopping material by using the high pressure device or grease gun. Maintain the initial injection pressure as around 40kg/cm and increase the pressure by each 10kg/cm gradually until the waterstopping material flows out from crack section. Water will come out from the crack section first and then waterstopping foaming agent and then water stopping liquid at last. If the waterstopping material that is not foamed comes from the crack section, then move to next packer for injection. 5.Packer Removing Operation Remove and break the packer by using vise pliers or hammer as a tool. If there is still a wet section, then inject the water stopping material again. 6.Finishing Operation Remove the water stopping material that is remained on the crack section. Spreading with the elastic sealing material. SL-8 (80*13.5*14)mm SL-10 (100*13.5*14)mm SL-15 (150*13.5*14)mm SL-20 (200*13.5*14)mm SL-25 (250*13.5*14)mm SL-30 (300*13.5*14)mm SL-100 (1000*13.5*14)mm In carton

PRODUCT DESCRIPTION Use: Coal injection, dust-fall, coal pressure reduction, coal-crack, methane drainage, etc. Function: 1. Moisture enters into coal mass, releasing some gas, and reducing the gas content in the coal body. 2. It can reduce the 80% dust, improve workers' working environment, and completely eradicate dust explosion accidents when water injection reaches the desired impact. 3. Wetting coal mass to prevent the spontaneous ignition of coal body. 4. High pressure water injection, breaking coal mass, reducing cost, and enhancing the workers feeling of safety. 5. Use the hole sealing device to efficiently prevent the gas stress and explosion. Structure: It is made of high pressure expansion hose, safety valve, and rapid-acting coupling. Techincal Parameter Hole-sealing diameter: 30~120mm(also can be processed according to customers' needs ) Working pressure: 1-8MP(processed according to the customers' needs) Start-up pressure of the safety valve: 0.4-0.5Mpa Working flow: 4-4.5 tons of water per hour Depth of hole-sealing: 1m-8m Expansion coefficient of the hose: 60%-100% Operation Method and Notes 1. It is very simple and convenient to use the device. It only needs to connect the device with the watercourse on the operation field, put the device into the drill hole under certain pressure, the hose will expand to come to purpose of hole sealing and coal breaking. 2. The device can be used for several times repeatedly. To unload pressure after water injection, it can restore to its original state, and then take out the hole device. 3. Forbiding to insert and retrieve the hole device with pressure. 4.Allow no person in front of the working device.

Pu Injection Packer..

GE OMNIPAQUE (iohexol) Injection 300mg and 350mg MOQ: 10,000 VAILS or 1,000 Packs Monthly. Supply ability: 100,000 VALS or 10,000 Packs Monthly Supply Ability: 50,000 VAILS or 5,000 Packs Monthly Payment terms: 100% Pre-payment by wire TT Delivery time: 30 days Please send me your PO details to move forward.

GE OMNIPAQUE (iohexol) Injection 300mg and 350mg GE OMNIPAQUE (iohexol) Injection 300mg and 350mg

1) plastic injection molded parts 2) mould design and development 3) automotive plastic parts 4) auto electrical parts 5) industrial/automotive battery parts 6) plastic household products 7) gear moulding 8) over moulding 9) insert moulding.

The advantage of injection machine ie-02 is the adjustable pressure relief valve with return to the hopper. With this feature you can regulate the pressure to prevent an overpressure of concrete otherwise the concrete will break. At the same time, this functionality will efficiently protect the pump of overcharging pressure. 1 set per carton, 20 cartons per pallet The gross package weigh is 9kgs

Agricultural products like onion, kidney bean, watermelon, corn, wheat, cotton.Clearing agent and transportation

The ignite temperature ¡æ 402 10 or 20 kgs per special made iron pail

Product’s name: Injection mold Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding. We also undertake injection, blow or rotary molding works from Toys to Big bins or water tanks, floating docks, road barrier etc. We can do custom design plastic parts or components. Water Tanks ( Roto Molding process)

Medical cable, extrusion, cable, wire, connector, cable assembly, wire harness, pvc, hdpe, pp, ldpe, pcb, pcba, injection mold, injection molding, fixture, machining part, stamping part, tube, catheter, wire harness, release paper, release liner, flim, tape, silicone foam, sponge.Export and shipping

Brand crack repair injection system, such as high pressure injection machine, high pressure polyurethane injection grout pump, injection packer, aluminum injection packer, ip-11polyurethane injection grout.