Transit mixer gear box, transit mixer oil cooler, hydraulic pumps and motors, oak tree boards.
Metal scrap and steel, cooking oil of various types, building material, logistics and agro products e.t.c. we deal very strongly in both ferrous and non ferrrous metals, copper wire scrap , aluminium wire scrap, aluminium ingots such as a7, a8,hms, aluminium , ubc , profiles aluminium wheels brass,hms, cast iron, pvc, big bags scrap cement. we buy and sell all these products,.Logistics
Pond liners, pond pumps, pond filters, water lilies, water plants, fontain pumps, uv lamps.
40g, fullbody
Can be printed up to 4 colors, uv stabilised, antistatic, antislip, microperforated, with vents etc. Various utilization in household or industry. Can be flat, tube, half-tube or sheets perforated on the roll. Packed on rolls (diameter 76 or 50mm).
Heat-shrikable film made of ldpe+hdpe, biaxial shrinkage, ideal for pallet wrapping, beverage packing etc. Packed on rolls (76 or 50mm).
Pallet hoods (cover bags) for protecting the goods against weather conditions. Made of polyethylene in several sizes, ideal for pallet protection. Can be printed up to 4 colors, UV stabilised etc. Packed on paper core (perforated on the roll) or loose in cartons.
Ethanol, oxychlorine, hypochlorous acid products.Producer
Safety shoes, occupational shoes, hospital shoes, esd shoes, farmer shoes, eu certificated shoes.
Supply copper millberry scrap, copper scrap, copper millberry wire scrap, copper Looking for a genuine buyer of copper scraps COMMODITY: Copper Wire Scrap, (Millberry) 99.99%
Plastic material and, pressing machines, melting and retranslation lines for processing plastic waste.Waste management
Distributor of chemicals.
Virgin HDPE,LDPE,PP Granules Film Grade HDPE Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190°C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50°C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 °C Blowing molding Grade HDPE Item Test Condition Test Method Value Unit Density ISO 1183 0.950~0.955 g/cm MFR 190°C/2.16kg ISO 1133 1.7~2.5 g/10min Tensile strength at yield ISO 527-2 24 MPa Elongation at break ISO 527-2 >600 %
Couplers.
Polyethylene film (HDPE, LDPE, MDPE), garbage bags, poly sacks, heat shrinkable foil..
Complete assortment of measurement & control technology industrial temperature sensors, pressure sensors, transmitters, valves..Complete product service including delivery, installation, and debugging.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 °C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 �°C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Salt, spent catalysts, bentonite clay.
Baby carriers, clothes and baby clothes, work clothes.
