Find Verified Industrial Ceramic Suppliers, Manufacturers and Wholesalers

Reaction bonded silicon carbide (sisic) ceramic beams have large high temperature bearing, good oxidization-resistance, serving for 4-5 years, about 15 times no longer than alumina without deformation. The products can be used at high temperature, even higher than 1700C for PSSiC Beams. It is applicable to the load-bearing beams in tunnel kiln, shuttle kiln, roller kiln and other industrial kilns. Characteristics: Max temperature tolerance 1380 degree Excellent oxidation and corrosion resistance High thermal conductivity and shock resistance High mechanical strength and abrasion resistance Relevant Recommendation: Silicon Nitride Ceramics Oxide bonded SiC (OSIC) Recrystallizde SiC (Re-SiC) Reaction Bonded SiC (SiSiC)

Product Description The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system! We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production. This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off. After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience. Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times. It is the ideal product instead of steel or rubber lined pipe and elbow. Advantages: 1. Good abrasion resistance The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks. 2. Little loss during running 3. Low project cost Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project. 4. Good thermal stability -50 ~600 degree C is the ideal temperature. 5. Easy and fast to fix on site Welding, flange, flexible joint are available.

High temp. ceramic, high thermal conductivity in ceramic. Corrugated box.

Industrial technical ceramics Our technical ceramics are of high purity and can withstand high temperature upto 1700 degree centigrade, and high wear resistance in nature.

We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �¯�¿�½?�± x 10-7 (�°C-1) [50�°C-500�°C] �  63.8 RESIDUE CONTENT Residue Content on 63m (w/w %) �  1.7 Residue Content on 106m (w/w %) �  1.6 Fired Shrinkage (%) (@1200�°C) �  8.5 Water Absorption (%) (@1200�°C) �  2.6 DRY MOR (kg/cm2) �  57 FlRED COLOUR L Value �  71.3 a Value �  4.4 b Value �  21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) �  60.23 Aluminium as A2O3 (%) �  25.26 Titanium as TiO2 (%) �  1.00 Iron as Fe2O3 (%) �  1.94 Sodium as Na2O (%) �  0.04 Potassium as K2O (%) �  1.70 Calcium as Cao (%) �  0.01 Magnesium as MgO (%) �  0.60 Phosphorus as P2O5 (%) �  0.03 Manganese as MnO (%) �  0.01 Chromium as Cr2O3 (%) �  0.01 Zirconium as ZrO2 (%) �  0.04 Hafnium as HfO2 (%) �  0.00 Sulphur as SO3 (%) �  0.00 Strontium as SrO (%) �  0.01 Loss on Ignition (%) (@1025�°C) �  9.1 MOISTURE CONTENT (%) �  28 - 32

Application:Industrial ceramic grinding mediagrinding Self Abrasion:0.0055-0.01% Density:3.60g/cm33.7g/cm3 Al2O3 content:92%,95% Making type:Rolling; ISP Moh's hardness:9 HRA: 85 Water absorption:0.01% Type:Ceramic Balls,alumina grinding media balls Appearance:Smooth and white Color:white Compressing strength:2000Mpa Size:0.5mm-95mm Advantage: High wear resistance Production temperature:1600 HS code:690912 Fe2O3:0.02% Certificate:ISO 9000

We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �?± x 10-7 (°C-1) [50°C-500°C]   63.8 RESIDUE CONTENT Residue Content on 63m (w/w %)   1.7 Residue Content on 106m (w/w %)   1.6 Fired Shrinkage (%) (@1200°C)   8.5 Water Absorption (%) (@1200°C)   2.6 DRY MOR (kg/cm2)   57 FlRED COLOUR L Value   71.3 a Value   4.4 b Value   21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%)   60.23 Aluminium as A2O3 (%)   25.26 Titanium as TiO2 (%)   1.00 Iron as Fe2O3 (%)   1.94 Sodium as Na2O (%)   0.04 Potassium as K2O (%)   1.70 Calcium as Cao (%)   0.01 Magnesium as MgO (%)   0.60 Phosphorus as P2O5 (%)   0.03 Manganese as MnO (%)   0.01 Chromium as Cr2O3 (%)   0.01 Zirconium as ZrO2 (%)   0.04 Hafnium as HfO2 (%)   0.00 Sulphur as SO3 (%)   0.00 Strontium as SrO (%)   0.01 Loss on Ignition (%) (@1025°C)   9.1 MOISTURE CONTENT (%)   28 - 32

Ceramic honeycomb With high achievable surface areas, low thermal expansion, excellent thermal shock resistance, low resistance and high compressive strength. Ceramic honeycomb filters of hisina used in casting and metallurgy industry has the functions as below: (also it been used for catalyst carriers, active catalysis and air flow distributors, used for heat exchange processes, electro-chemical applications and carrier bodies for biological applications and still used in catalytic converters for purifying vehicle exhaust gas) Mechanic deterring: remove big oxide Commutated function: calm down turbulent laminar flow Absorbing function: the myriad eyelets which only been found in microscope can absorb smaller impurities, make more excellent metal liquid. Contact action: the special exact square and the triangle bore eye appearance design promote to oxidize miscellaneous quality to adsorb dint. 31*30*22(cm), wrapped every pieces with soft plastic foams, then packed in carton.

Ceramic foam filter used for casting Our products have many advantages such as superior porosity, big m2/m3, high temperature resistance and excellent thermal shock resistance (see detail in technical data), it used in foundry, noise elimination and other industries widely. And especially for the foundry & casting industry. Mechanic deterring: remove big oxide Filtration: filtrate small impurities and oxide Commutated function: calm down turbulent f¦claminar flow Mixed round function: mix the distributaries and confluence flow equality, reduce air bubble Absorbing function: the myriad eyelets which only been found in microscope can absorb smaller impurities, make more excellent metal liquid 31*31*22(cm) wrapped every pieces with soft plastic materials then packed in carton