Medical face masks, 3 and 4 ply medical masks, disposable masks, surgical masks, ffp2 masks, n95, kn95, coverall type 3 4 5 6, isolation gown, shoe cover, head cover, nitrile gloves like cardinals,.Export and import
Dried rose hip fruits, peeled walnut, cold pressed walnut oil, dried tomato, dried apples.Exporting
Product name: Coverall type 3B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. â?? Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
Product Name: EU certified Isolation Gown Material: PP+PE 42 GSM (Tolerance / + 2gms) Fluid proof fabric Serged sewn seams long sleeves with elastic cuff Back length: 120-140 cm Non-sterile sizes: M-XL blue color Packaging 10 pcs per inner bag. 100 pcs per carton Execution standard EN13688 and EN14126 test report by SGS Certificates CE from notified body(SGS) ISO13485
Product Name: Disposable pp mob cap Material: PP 9-10 GSM/pc machine-made presence of elastic for fixing water resistant air permeability Non-sterile
Product Name: Disposable pp mob cap Material: PP 9-10 GSM/pc machine-made presence of elastic for fixing water resistant air permeability Non-sterile
General Description: Type IIR surgical mask to fully protect the working environment, reduce the risk of infection and protect the respiratory system from potentially contaminated fluids. Technical specifications Product Name: 3PLY Surgical mask type IIR Material: 3-layer non-woven melt-blown fabric Bacteria Filtration level: > 98% Size : 17x9,5 cm; flat style Adjustable nose clip elastic earloops Colour: blue Non-sterile Single use, disposable Splash resistance Medical mask bioburden: 30 CFU/gm Surgical mask conforms to standards: EN14683. The disposable mask box should be marked with the manufacturer's name, EN14683 and CE marking. Surgical mask Certificate CE Registration : ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling: Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Disposable cap for medical facilities. Technical specifications Product Name : Disposable pp mob cap Material : PP 9-10 GSM/pc machine-made presence of elastic for fixing water resistant air permeability Non-sterile Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Disposable protective shoe covers for chemical and biological protection Technical specifications Product Name : Disposable CPE shoe cover Material : CPE 2.6g/pc machine-made Non-sterile Permeability for air and water vapour Elastic insert (at the ankle level) The ability to retain up to 99% of solid particles larger than 1 micron Material does not form pile and dust Anti-slipping sole Inseam: stitched Size : 36-42 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: The disposable dressing gown is intended for use in medical institutions during procedures and examination of patients. The assortment includes disposable gowns with a sleeve on an elastic band on buttons or velcro and procedural gowns with a sleeve on a cuff on buttons or Velcro. Technical specifications Product Name : EU certified Isolation Gown Material : PP+PE 42 GSM (Tolerance / + 2gms) Fluid proof fabric Serged sewn seams long sleeves with elastic cuff Back length : 120-140 cm Non-sterile Sizes : M-XL blue color Packaging : 10 pcs per inner bag. 100 pcs per carton Execution standard EN13688 and EN14126 test report by SGS Certificates CE from notified body(SGS) ISO13485 Product Measurements A: Length 120 - / + 3cm B: Width in whole 140 - / + 3cm C: Length of sleeves 59 - / + 2cm D: Depth of sleeves 27 - / + 2cm E: Width of shoulder 22 - / + 2cm F: Length of neck tie 35 -/ + 2cm G: Length of waist tie 180 - / + 5cm Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Non-fluid resistant respirator mask protecting against airborne pathogens. Anti-penetration high filtration mask Technical specifications Product Name: FFP2 Respirator with harness band Material : 4-layer non-woven melt-blown fabric Bacteria Filtration level: > 94 % Air permeability: > 2 mm H2O Shape : foldable without valve Fits most face shapes, without inspiration/expiration air-leakage Adjustable nose bridge strip (4 x 90 mm (w x l) (+/-10%)) Elastic ear straps, both fitting around the ears or optional fitting around the top of the head with support of harness band(included). white colour Non-sterile Single-use, disposable Each mask bares clear identification of (i) protection provided FFP2, (ii) which side to wear up (nose), (iii) manufacturer's name, and (iv) model reference Conforms to standards: EN 149: 2001/FFP2. The disposable respirator should be marked with the manufacturer's name, EN 149: 2001/FFP2 and CE certification number. Certificate CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions: As indicated by supplier Packaging and labelling: Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration. Technical specifications Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength Certificates CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Individually packaged in a transparent plastic bag. Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Model No. & Name - Shoe cover Material - Fabric: PP a. FOB Shanghai Price USD/pc - US$0.090 Estimate CIF by Air Price USD/pc - US$0.329 Order Quantity - 100,000 Pcs b . FOB Shanghai Price - US$0.089 USD/pc Estimate CIF by Air Price - US$0.327 USD/pc Order Quantity - 300,000 c . FOB Shanghai Price - S$0.085 USD/pc Estimate CIF by Air Price - US$0.325 USD/pc" Order Quantity - 500,000 Pcs d . FOB Shanghai Price - US$0.084 USD/pc Estimate CIF by Air Price - US$0.323 USD/pc Order Quantity - 1,000,000 Pcs Packing - 1000pcs/carton G.W:10kg/carton Ctn size (cm) - 50*30*31 Payment Term - 50% T/T in advance,50% before shippment, LC, can be negotiated "Vaildity of price" - 3 month "Delivery Time - 5 - 15 Business Days Depends on the Order
Model No. &Name - High Shoe Cover with Antisilp Strip Material - Fabric: SMS FOB Shanghai Price USD/pc - US$0.420 Estimate CIF by Air Price USD/pc - US$0.715 Order Quantity - 100,000 Pcs b . FOB Shanghai Price - US$0.400 USD/pc" "Estimate CIF by Air Price - US$0.705 USD/pc" Order Quantity - 300,000 Pcs c. FOB Shanghai Price - US$0.370 USD/pc Estimate CIF by Air Price - US$0.700 USD/pc Order Quantity - 500,000 d . FOB Shanghai Price - US$0.3 50 USD/pc Estimate CIF by Air Price - US$0.680 USD/pc Order Quantity - 1,000,000 Pcs Packing - "800pcs/carton G.W:12kg/carton Ctn size (cm) - 50*30*31 Payment Term - 50% T/T in advance,50% before shippment, LC, can be negotiated "Vaildity of price" - 3 month "Delivery Time - 5 - 15 Business Days Depends on the Order
Model No. & Name - FFP2 WITHOUT Valve Non-Sterile Material - EARLOOP TYPE 5 PLY BFE 95% White Color a . FOB Shanghai Price USD/pc - US$1.000 Estimate CIF by Air Price USD/pc - US$1.000 Order Quantity - 50,000 Pcs b . FOB Shanghai Price - US$0.545 USD/pc Estimate CIF by Air Price - US$0.996 USD/pc" Order Quantity - 100,000 Pcs c . FOB Shanghai Price - US$0.535 USD/pc Estimate CIF by Air Price - US$0.991 USD/pc Order Quantity - 200,000 Pcs d . FOB Shanghai Price - US$0.525 USD/pc Estimate CIF by Air Price - US$0.982 USD/pc Order Quantity - 500,000 e . FOB Shanghai Price - US$0.500 USD/pc Estimate CIF by Air Price - US$0.975 USD/pc" Order Quantity - 1,000,000 Pcs Packing - 400pcs/carton G.W:16kg/carton Ctn size(cm) - 55*50*29 Payment Term - 50% T/T in advance,50% before shippment, LC, can be negotiated Vaildity of price - 3 month Delivery Time - 5 - 15 Business Days Depends on the Order
Model No. & Name - Bouffant Caps Material - Fabric: SMS a . FOB Shanghai Price USD/pc - US$0.320 Estimate CIF by Air Price USD/pc - US$0.485 Order Quantity - 100,000 Pcs b . FOB Shanghai Price - US$0.300 USD/pc Estimate CIF by Air Price - US$0.473 USD/pc Order Quantity - 300,000 Pcs c . FOB Shanghai Price - US$0.290 USD/pc Estimate CIF by Air Price - US$0.461 USD/pc" Order Quantity - 500,000 Pcs d. FOB Shanghai Price - US$0.280 USD/p Estimate CIF by Air Price - US$0.450 USD/pc Order Quantity - 1,000,00 Pcs Packing - 800pcs/carton G.W:10kg/carton Ctn size (cm) - 34*32*32 Payment Term - 50% T/T in advance,50% before shippment, LC, can be negotiated Vaildity of price - 3 month Delivery Time - 5 - 15 Business Days Depends on the Order
Product Name: 3PLY mask type IIR Material: 3-layer non-woven melt-blown fabric Bacteria Filtration level: > 98% Size: 17x9,5 cm; flat style Adjustable nose clip elastic earloops Colour: blue Non-sterile Single use, disposable Splash resistance Medical mask bioburden: 30 CFU/gm Surgical mask conforms to standards: EN14683. The disposable mask box should be marked with the manufacturer's name, EN14683 and CE marking. Surgical mask Certificate CE Registration ISO13485
EARLOOP TYPE 5 PLY BFEâ?¥95% Product Name: FFP2 Respirator with harness band Material: 5-layer non-woven melt-blown fabric Bacteria Filtration level: > 94 % Air permeability: > 2 mm H2O Shape: foldable without valve Fits most face shapes, without inspiration/expiration air-leakage Adjustable nose bridge strip (4 x 90 mm (w x l) (+/-10%)) Elastic ear straps, both fitting around the ears or optional fitting around the top of the head with support of harness band(included). white colour Non-sterile Single-use, disposable Each mask bares clear identification of (i) protection provided FFP2, (ii) which side to wear up (nose), (iii) manufacturer's name, and (iv) model reference Conforms to standards: EN 149: 2001/FFP2. The disposable respirator should be marked with the manufacturer's name, EN 149: 2001/FFP2 and CE certification number. Certificate CE from notified body ISO13485
Product Name: 3PLY Surgical mask type IIR Material: 3-layer non-woven melt-blown fabric Bacteria Filtration level: > 98% Size: 17x9,5 cm; flat style Adjustable nose clip elastic earloops Colour: blue Non-sterile Single use, disposable Splash resistance Medical mask bioburden: 30 CFU/gm Surgical mask conforms to standards: EN14683. The disposable mask box should be marked with the manufacturer's name, EN14683 and CE marking. Surgical mask Certificate CE Registration ISO13485
Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phiâ??X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
