Battery Specification 2200mah battery 3c for power tools, full capacity, high cycling, low internal resistance and ultra-low self-discharge to meet the requirements of your power products. Capacity: 2200 mAh Minimum Capacity: 2150 mAh Discharge Rate: 3C Nominal Voltage: 3.7V Internal Resistance: â?¤25m�© Cycle Life: 500 Charge Voltage: 4.2V士0.03V Charge Current: 0.5C (About 3 hours) 1C (About 2 hours) Standard Discharge Mode: 0.2C Constant current discharge to 2.75V Max. Continuous Discharge Current: 6600mA Operating Temperature Range: Recharge (0-45°C) Discharge (-20-60°) Long time Storage Temperature: -20~25°C Initial Size: Diameter:18.15+0.20mm Height:65.0士0.50mm
Lithium ion battery powder good quality Nickel 15% above, Cobalt 5% above, Lithium 3% above and Copper 7% above regular base .
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
FINGERTIP PULSE OXIMETER Parameters: Two parameters:SPO2, Pulse Rate. Waveforms: SpO2 Waveform. Features: 1 COLOR OLED display, four direction adjustable. 2 SpO2 and pulse monitoring, and Waveform display. 3 With menu operation. 4 With beep and alarm. 5 Low-power consumption, continuously work for 50 hours. 6 Small in size, light in weight, and convenient to carry. 7 Low voltage alarm display, Auto power-off. 8 Runs on standard AAA batteries. Detailed descriptions of product functions: SPO2: 1 Measurement range: 70%-99% 2 Accuracy: �±2% on the stage of 70%-99%, unspecified(
1) plastic injection molded parts 2) mould design and development 3) automotive plastic parts 4) auto electrical parts 5) industrial/automotive battery parts 6) plastic household products 7) gear moulding 8) over moulding 9) insert moulding.
Battery Specification 18650 battery 3000mah for power tools, full capacity, high cycling, low internal resistance and ultra-low self-discharge to meet the requirements of your household appliances battery. Capacity: 3000 mAh Minimum Capacity: 2980 mAh Discharge Rate: 3C Nominal Voltage: 3.7V Internal Resistance: 25m© Cycle Life: 500 Charge Voltage: 4.2V 0.03V Charge Current: 0.5C (About 3 hours) 1C (About 2 hours) Standard Discharge Mode: 0.2C Constant current discharge to 2.75V Max. Continuous Discharge Current: 9000mA Operating Temperature Range: Recharge (0-45°C) Discharge (-20-60°) Long time Storage Temperature: -20~25°C Initial Size: Diameter:18.15+0.20mm Height:65.0 - 0.50mm
BATTERY SCRAP Minimum Order Quantity 200 Metric Ton Product Description WE ARE TRADING MANUFACTURERS OF ALL TYPES OF used car scrap battery ORIGIN: THAILAND WORLDWIDE. Specifications we are offer 1.dry charged battery & MF battery 2.Meet all DIN & JIS standard 3.Powerful quick scrap used a car battery Specifications Specifications 1.dry charged battery & MF battery 2.Meet all DIN & JIS standard 3.Powerful quick start & long life 4.1-2 year used car scrap battery 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific the gravity of the electrolyte or add water to a battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantees leakproof operation in and position with no adverse effect on capacity or service life. (4)With our high-quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Battery Acidity�?�??�?�?�?� �?�??�?�?�?� 99.99%. Monthly Supply�?�??�?�?�?� 500 - 1500 metric tons, Types all kind of scrap batteries, Fe Content HMS Fe Content (%) 100%) Drained Battery color Black/white/gray Black/white/gray Pallet with shrink wrapping (Specifications). Additional Information Item Code 40005602 Delivery Time 7 Production Capacity 50000 Packaging Details Supply Ability Supply Ability: 30000 Metric Ton/Metric Tons per Week Packaging & Delivery Port Germany Lead Time : Quantity(Metric Tons) 1 - 10000 >10000 Est. Time(days) 3 To be negotiated
Basic Info. Model NO. PTD250-12 Installation Packaged Rechargeable Chargeable Weight (Kg) 68kg Color Black/Ivory White Terminal Type Lead / Bolt & Nut Safety Explosion-Proof Battery Case ABS Separator AGM Sealed Type Sealed Transport Package Carton / Wooden Case / Pallet Specification 520x268x243 mm Trademark PUSTUN Origin Guangzhou, China HS Code 8507200000 Production Capacity 600PCS/Day Product Description We produce VRLA/SLA Battery, Industrial Battery, 2V/6V/12V Batteries, Rechargeable Battery, Gel Battery, Deep Cycle Battery, sealed lead acid battery and so on. Valve regulated lead acid deep cycle series batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications. Advanced Features: 1. Environmentally friendly 2. Completely Maintenance-Free 3. Non-Spillable construction design. 4. Wide Operating Temperature Range(-20�°C~+60�°C) 5. Long Life (12-15 years designed life) 6. Explosion Proof 7. Valve Regulated & High Discharge Rate Capability 8. Low Self Discharge 9. Independent of Position 10. Ease of Shipment 11. No need of balanced charge or boost
The battery is a new type of energy storage product, which can be used to provide reliable power supply for various equipment and systems. It is especially suitable for applications with large power, limited installation space, limited bearing capacity and long life.Battery built-in bms battery management system, battery voltage, current, temperature and other information management and monitoring. In addition, the battery pack can balance the charge and discharge of the battery to prolong the cycle life. Multiple battery packs can be parallel to expand capacity and power, parallel to expand capacity and longer power support time requirements. 1.Environmental protection and pollution-free: the whole module using materials are non-toxic, pollution-free; 2.long safety life: the core cathode material of battery module is made of LiFeOP4, good safety performance and long service life; 3.Protection function: battery management system can protect battery module over discharge, over charge, over current and high / low temperature; 4.Equilibrium function: the battery management system has its own passive equalization, can balance the battery module each single string core; 5.Expansion: flexible configuration, multiple battery modules can be parallel expansion capacity, applicable to different standby time requirements; 6.Low power consumption: the battery has the function of automatic dormancy, when no live equipment is connected, it can enter the low power state by itself and reduce the self-loss; 7.No memory: no memory effect, shallow charge and discharge performance is excellent; 8.Wide temperature range: working temperature range-20~70, charge 0~60, discharge-20~70, good discharge performance and cycle life, Built in BMS overall protection 1.Over charged protection 2.Over discharged protection 3.Thermal protection 4.Over current protection 5.Cell balancing
1. copper cathode 2. copper wire scrap 3. sunflower oil 4. soybeans seeds 5. used rails 6. palm oil 7. urea 46% nitrogen granular 8. white corn 9. sisal fiber 10. cashew nuts 11. sesame seed 12. hardwood charcoal 13. a4 paper 14. icumsa 45 sugar 15. wood pellets 16. paper scrap 17. used engines 18. yamaha cardboard engines 19. pet bottle scrap 20. almond nuts 21. pistachio nuts 22. battery scrap 23. computer scrap 24. phone scrap 25. beef meat 26. goat meat 27. lamb meat 28. wet salted cow 29. cocoa 30. Arabica Coffee 31. Ubc Aluminum Scrap.
Battery Specification: 2200mah battery 5c for power tools, full capacity, high cycling, low internal resistance and ultra-low self-discharge to meet the requirements of your power products. Capacity: 2200 mAh Minimum Capacity: 2180 mAh Discharge Rate: 5C Nominal Voltage: 3.7V Internal Resistance: â?¤18m�© Cycle Life: 500 Charge Voltage: 4.2V士0.03V Charge Current: 0.5C (About 3 hours) 1C (About 2 hours) Standard Discharge Mode: 0.2C Constant current discharge to 2.75V Max. Continuous Discharge Current: 11000mA Operating Temperature Range: Recharge (0-45°C) Discharge (-20-60°) Long time Storage Temperature: -20~25°C Initial Size: Diameter:18.15+0.20mm Height:65.0士0.50mm
Acid Black 1 Acid Red 119 Acid Orange 74 Acid Black 11 Acid Red 131 Acid Orange 80 Acid Black 24 Acid Red 151 Acid Orange 142 Acid Black 26 Acid Brown 14 Acid Violet 17 Acid Black 52 Acid Brown 75 Acid Violet 49 Acid Black 173 Acid Brown 79 Acid Violet 54 Acid Black 174 Acid Brown 106 Acid Blue 7 Acid Black 194 Acid Brown 158 Acid Blue 9 Acid Black 210 Acid Brown 214 Acid Blue 15 Acid Black 234 Acid Brown 348 Acid Blue 92 Acid Red 14 Acid Brown 349 Acid Blue 113 Acid Red 17 Acid Brown 355 Acid Blue Br Acid Red 18 Acid Yellow 11 Acid Blue N Acid Red 33 Acid Yellow 17 Acid Blue V Acid Red 44 Acid Yellow 23 Acid Green 1 Acid Red 52 Acid Yellow 42 Acid Green 3 Acid Red 54 Acid Yellow 73(Uranine) Acid Green 9 Acid Red 73 Acid Yellow 99 Acid Green 16 Acid Red 87(Eosine Sodium) Acid Yellow 110 Acid Green 17 Acid Red 88 Acid Yellow 194 Acid Green 20 Acid Red 89 Acid Orange 3 Acid Green 25 Acid Red 97 Acid Orange 7(Acid Orange Ii) Acid Green 111 Acid Red 99 Acid Orange 10 Acid Red 114 Acid Orange 56 R/o Salt Free Dyes For Ink Application Acid Red 52 Acid Blue 15 Acid Violet 17 Acid Red 87 Acid Blue 25 Acid Black 1 Acid Blue 9 Acid Yellow 151
(1). Potassium hydroxide is widely used in the production of potassium carbonate including KHCO3, potassium soaps,detergents, fine cosmetic, potassium hydrogen phosphate, potassium permanganate, medical intermediate, liquid fertilizers, synthetic rubber, ABS resin, natural rubber emulsion, paper agent, fermentation, cresol, de-sulfuration in petroleum refining, bio-fuel and alkaline battery. (2). Potassium hydroxide can be used as a desiccant, sorbent, used for preparing potassium soap, oxalic acid and various salt, also used in electroplating, carving and so on. (3). Potassium hydroxide can be used for the production of potassium soap,alkaline battery, cosmetics in light industry (such as cream, cream and shampoo). (4). In the dye industry, Potassium hydroxide can be used for the production of vat dyes, such as vat blue RSN, etc.. (5). In the electrochemical industry, Potassium hydroxide can be used for electroplating, engraving, etc.. (6). In the textile industry, Potassium hydroxide can be used for printing and dyeing, bleaching and mercerizing, and used as the main raw material for synthetic fiber, polyester fiber manufacturing. (7). In addition, it is also used in metallurgical heating agent and leather fat, etc.. (8). Potassium hydroxide can be used as analytical reagent, reagent, carbon dioxide and water absorbent, and also used in pharmaceutical industry; (9). Potassium hydroxide can be used as the PH value of acid and alkali neutralization solution. (10). Potassium hydroxide can be used as the basic chemical reagent, carbon dioxide absorbent. saponification agents.
2600mah battery for power tools, full capacity, high cycling, low internal resistance and ultra-low self-discharge to meet the requirements of your power products. Capacity: 2600 mAh Minimum Capacity: 2580 mAh Discharge Rate: 3C Nominal Voltage: 3.7V Internal Resistance: â?¤20m�© Cycle Life: 500 Charge Voltage: 4.2V士0.03V Charge Current: 0.5C (About 3 hours) 1C (About 2 hours) Standard Discharge Mode: 0.2C Constant current discharge to 2.75V Max. Continuous Discharge Current: 7800mA Operating Temperature Range: Recharge (0-45C) Discharge (-20-60) Long time Storage Temperature: -20~25C Initial Size: Diameter:18.15+0.20mm Height:65.0-0.50mm
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH-500KWH optional 5. The use of international advanced Mitsubishi IPM module and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform 9. PV charge controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of PV modules and batteries 10. Colorful LCD display all module working information and status.
ESS 215KW Lithium Battery Energy Storage System 384VDC Rechargeable Lifepo4 Battery pack 280AH Energy Storage Battery 1. High energy density, small footprint, short construction period, strong environmental adaptability 2. Standardized components, modular architecture, easy for expansion 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Efficient battery module and system cooling design 5. The use of international advanced IGBT and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Our BMS use NXP(USA) automotive-grade high performance chip, strong anti-interference, good reliability, wide temperature range. 9. We use brand new high quality A-grade battery power cell, longer service life. 10. Charging and discharging are controlled separately, more convenient and reliable to control charging and discharging. 11. Big color LCD touch screen display, easy setting and operation. 12. Can built in solar charge controller and AC-DC charger, our BMS can intelligently manage charger to charge battery well, BMS can communicate well with battery, solar controller, ac charger and inverter, one integrated intelligent monitoring system. 13. Approved by UL1741 certificate. 14. Accept customized product, our lithium battery system are widely used in many situations, such as: Different residential home, hotel, shop, factory, hospital, commercial buildings, electric car, RVs, Van, mobile dining car, heavy truck, different ship/boats, ice-cream car, outdoor camper,.etc. Applications: 1.Energy Storage --Solar-Wind Power System / City Grid (On/Off) / Community and Family 2.Back-up System and UPS --Telcom Base / CATV system / Computer Server Center / Medical Instrumnt / Military Equipment 3.Other Applications --Security and Electronics / Mobile POS, Mining Lihgt / Torch / LED Light / Emergency Light --RV Motorhome /Golf Carts Battery / Boat Marine Yachts / Electric Skateboard / Electric bike / Electric Scooter / Electric bicycle --LED Backup / Engine Starting Battery,etc.
ESS 215KW Lithium Battery Energy Storage System 384VDC Rechargeable Lifepo4 Battery pack 280AH Energy Storage Battery 1. High energy density, small footprint, short construction period, strong environmental adaptability 2. Standardized components, modular architecture, easy for expansion 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Efficient battery module and system cooling design 5. The use of international advanced IGBT and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Our BMS use NXP(USA) automotive-grade high performance chip, strong anti-interference, good reliability, wide temperature range. 9. We use brand new high quality A-grade battery power cell, longer service life. 10. Charging and discharging are controlled separately, more convenient and reliable to control charging and discharging. 11. Big color LCD touch screen display, easy setting and operation. 12. Can built in solar charge controller and AC-DC charger, our BMS can intelligently manage charger to charge battery well, BMS can communicate well with battery, solar controller, ac charger and inverter, one integrated intelligent monitoring system. 13. Approved by UL1741 certificate. 14. Accept customized product, our lithium battery system are widely used in many situations, such as: Different residential home, hotel, shop, factory, hospital, commercial buildings, electric car, RVs, Van, mobile dining car, heavy truck, different ship/boats, ice-cream car, outdoor camper,.etc. Applications: 1.Energy Storage --Solar-Wind Power System / City Grid (On/Off) / Community and Family 2.Back-up System and UPS --Telcom Base / CATV system / Computer Server Center / Medical Instrumnt / Military Equipment 3.Other Applications --Security and Electronics / Mobile POS, Mining Lihgt / Torch / LED Light / Emergency Light --RV Motorhome /Golf Carts Battery / Boat Marine Yachts / Electric Skateboard / Electric bike / Electric Scooter / Electric bicycle --LED Backup / Engine Starting Battery,etc.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
