Product Bronze Globe Steam Stop Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in Bonnet, Inside Screw, Rising Stem
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Screwed female BSP Taper threads to BS 21
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm�²)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Globe Steam Stop Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in Bonnet, Inside Screw, Rising Stem
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm�²)
Maximum Working Temperature: 225C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Globe Steam Stop Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Screwed in Bonnet, Inside Screw, Rising Stem
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table F (undrilled)
Testing & Certification
Body Test Pressure : 300 Psig.Hyd.
Seat & Back Seat Test Pressure : 300 Psig. Hyd. & 150 Psig. Steam
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm�²)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product :Bronze Globe Steam Stop Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Bolted Bonnet, Outside Screw & Yoke Type, Rising Stem
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Screwed female BSP Taper threads to BS 21
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm)
Maximum Working Temperature: 225 C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Globe Steam Stop Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Bolted Bonnet, Outside Screw & Yoke Type, Rising Stem
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table H F.F. undrilled
Testing & Certification
Body Test Pressure : 500 Psig.Hyd.
Seat & Back Seat Test Pressure : 500 Psig. Hyd. & 250 Psig. Steam
Working Pressure : Max.BOP 250 Psig.(17.58Kg/cm�²)
Maximum Working Temperature: 225C (435 F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
Product : Bronze Globe Steam Stop Valve
Type of Pattern : Straight Type
Body Material cum Standard : Bronze IBR 282(a)(iv) Gr.B
Description : Bolted Bonnet, Outside Screw & Yoke Type, Rising Stem
Type of Seat : Renewable Seat
Type of Disc : Renewable Disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per BS 10 Table F F.F. undrilled
Testing & Certification
Body Test Pressure : 300 Psig.Hyd.
Seat & Back Seat Test Pressure : 300 Psig. Hyd. & 150 Psig. Steam
Working Pressure : Max.BOP 150 Psig.(10.54Kg/cm�²)
Maximum Working Temperature: 225 C (435F)
Test Certificate in Form lll-C as per IBR is furnished with every supply.
(APS Marines & Logistics)
TECHNICAL DATASHEET
EcoTexTM -SL55 - PVA FREE ONE-SHOT PRODUCT
DESCRIPTION Powder types unique one-shot product which needs no extra native starch, modified starch, binder, softener, lubricant to be added further. It is mainly used for Shuttle-less loom woven warp yarns counting above the 40s to 60�¢??s Cotton.
Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property.
SPECIFICATIONS
1.Appearance - Off white powder
2.pH value of 7% solution - 5 to 7
3.Solubility - Partially soluble in cold water
4.Viscosity of size mix - 4 to 5 sec (SITRA -6mm cup)
5.Total Moisture - Max 13%
6.Bulk density - 0.5 to 0.6 g/ml
7.Total ash - Max4%
COOKING METHOD
1. Fill the required quantity of water in a cooker
2. Gradually add EcoTexTM-SL55 and min for 2 min.
3. Close the pressure cooker lid.
4. Open the steam value and cook to @ 120�? �ºC or 35psi.
5. Retain in the cooker for 15 to 20 minutes.
6. Then transfer the size mix to storage.
PROPERTIES
1. Moisture regain:
The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops.
2. Film property:
The very thin strong film gives the inter fiber penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving.
3. Abrasion resistance:
The strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, weft picking element.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 25Kg net weight PP bags with moisture-proof liner inside
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT
DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological.
Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving.
SPECIFICATIONS
1.Appearance - Off white powder
2.pH value of 5% solution - 6 to 8
3.Solubility - Partially soluble in cold water
4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup)
5.Total Moisture - Max 13%
6.Bulk density - 0.5 to 0.6 g/ml
7.Total ash - Max4%
COOKING METHOD
1. Fill the required quantity of water in the cooker.
2. Gradually add EcoTexTM-SL20 and mix for 2 min.
3. Add other ingredients and mix for 2 min.
4. Close the pressure cooker lid.
5. Open the steam value and cook to @ 120�? �ºC or 35psi.
6. Retain in the cooker for 15 to 20 minutes.
7. Then transfer the size mix to storage.
PROPERTIES
1. Moisture regain:
The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops.
2. Film property:
The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving.
3. Abrasion resistance:
A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 50Kg net weight PP bags with moisture-proof liner inside.
Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
