Hydrogen Ptl Porous Titanium Sintered Plate Suppliers and Manufacturers

The production of PTL (porous titanium sintered plate) is a key component in the manufacture of hydrogen production electrolyzers. PTL is a type of electrode material that is used to catalyze the reaction that produces hydrogen gas from water. The parameters of PTL (porous titanium sintered plate) used in hydrogen production electrolyzers can vary depending on the specific application and design of the electrolyzer. However, some common parameters for PTL porous titanium sintered plates used in hydrogen production electrolyzers include: 1.Porosity: The porosity of the PTL porous titanium sintered plate is an important parameter that determines the surface area available for the hydrogen production reaction. Typically, PTL plates have a porosity of around 30-50%, which provides a large surface area for efficient hydrogen production. 2.Pore size: The size of the pores in the PTL plate can also affect the efficiency of the hydrogen production reaction. Generally, PTL plates have pore sizes ranging from 1um to 100um, depending on the specific application. 3.Thickness: The thickness of the PTL plate can vary depending on the design of the hydrogen production electrolyzer. TopTiTech can customized the thickness from 1mm to 3mm. 4.Catalyst loading: The amount and type of catalyst material used to coat the PTL plate can also affect the efficiency of the hydrogen production reaction. Typically, platinum or iridium catalysts are used, with loading levels ranging from a few micrograms per square centimeter to several milligrams per square centimeter.

Sheet :Thickness:0.6-10mm Max Length:1000mm Max width:340mm Pipe : OD10-150MM* wall thickness 2-5MM Materials : titanium GR1 GR2 Feature: 1.Working Temperature:-200-1000°C 2.Corrosion Resistance 3.High Filtering Efficiency 4.Metallic capacities, such as noise reduction,hot resistance,heat conduction,high strength and etc 5.Easy to welding and long working life Filter Shape: Could be cartridge filters,disc filters ,cup filters,cap filters,filter palte and etc Application: separation and purification of solid-liquid, gas-liquid and gas-solid in the petrifaction, hydraulic manufacturing and medical apparatus and instruments of basic industries. Technique parameters titanium powder sintering filter element technique parameters using temperatur:â?¤300°C filtering level filtration precision um maximum diameter um permeability coefficient 10-12m2 permeability m3/h.m2.kpa thickness mm compression strength Mpa/cm3 T9 0.2 2.5 1.5 0.6-10 3 T8 0.5 4 3 0.6-10 3 T7 1 6 5 0.6-10 3 T6 2 10 15 0.6-10 3 T5 5 15 0.04 40 0.6-10 2.5 T4 10 30 0.15 120 0.6-10 2.5 T3 20 60 1.01 250 0.6-10 2.5 T2 30 100 2.01 500 0.6-20 2.5 T1 50 160 3.02 800 0.6-20 2.5 The product performance can achieve and even exceed GB. The internal pressure of powder rolled and roll tube welding is more than 0.3Mpa

Product Introduction Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Sintered porous titanium plates are used in various applications where a high level of strength and durability is required, such as in the aerospace, automotive, and medical industries. Parameters Material: Titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm Dia: 1MM above Features 1. High Strength-to-Weight Ratio: Sintered porous titanium plates have a high strength-to-weight ratio, which means they are strong and durable while also being lightweight. This makes them ideal for applications where weight is critical, such as in the aerospace industry. 2. Corrosion Resistance: Titanium is highly resistant to corrosion, making it ideal for use in harsh environments where other materials may corrode or degrade over time. This makes sintered porous titanium plates a good choice for applications in the chemical and petrochemical industries. 3. Biocompatibility: Titanium is biocompatible, which means it is not toxic to living tissue and does not cause adverse reactions when implanted in the human body. This makes sintered porous titanium plates ideal for medical applications such as implants and prosthetics. 4. Customizable Pore Size and Distribution: Sintered porous titanium plates can be customized to have specific pore sizes and distributions, which makes them useful for applications such as filtration and catalysis. 5. High-Temperature Resistance: Titanium has a high melting point and can withstand high temperatures, making it ideal for use in high-temperature applications such as heat exchangers and furnace components. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then molded and pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.

Product Introduction Sintered porous titanium plate is a porous material made of titanium powder that is compressed and heated to create a solid block. The block is then treated with acid or other chemicals to remove any remaining impurities and create a porous structure. Product parameters Aperture size: 0.1 3mm Porosity: 30% 60% Thickness: 0.5mm 6mm Specific surface area: 100 1000m2/m3 Tensile strength: 300 600MPa Thermal conductivity: 2 20W/mK Application fields: widely used in aviation, automobiles, medical equipment, biological materials, filter materials and other fields Features 1. Efficient transmission of hydrogen: The highly porous structure of the porous titanium plate enables the effective transmission of hydrogen and has good gas transmission performance, which can significantly improve the efficiency of the water electrolysis hydrogen production system. 2. Lightweight and corrosion-resistant: The porous titanium plate is light in weight and is very suitable for making the transmission layer. At the same time, the titanium material can resist the corrosion of many acidic and alkaline media and has a long life and stable performance. 3. Easy to clean: The porous titanium plate has a large opening rate and a large surface area, which is easy to clean and handle, and can effectively reduce the pollution of the water electrolysis hydrogen production system and reduce the impact on the environment. 4. Highly stable: The porous titanium plate has a long service life and high stability, and can keep its pore structure and performance unchanged, further improving the stability of the hydrogen production system, thereby meeting various needs of industrial and scientific laboratories.

Porous titanium plate is a type of material that is characterized by its interconnected network of pores. It is made from titanium, which is a lightweight, strong, and corrosion-resistant metal. The porosity of the titanium plate allows for increased surface area, which can be useful in applications such as filtration, catalysis, and biomedical implants. Product Parameters Brand: TOPTITECH Porosity: 30-40% Filtration rate: 1um-50um Temperature: â?¤300â?? Size: Customized Porous titanium plate has several features that make it a unique material. First, the pore size and distribution can be controlled during manufacturing, allowing for customization of the material for specific applications. The interconnected network of pores also allows for fluid or gas flow through the material, making it useful for filtration and catalysis. Porous titanium plate is also biocompatible, which makes it suitable for use in biomedical applications. Porous titanium plate has a wide range of applications in various industries. In biomedical applications, it is commonly used for bone implants, where the porous structure allows for better integration with surrounding bone tissue. It is also used in dental implants, where the porous structure allows for better anchoring of the implant. In the chemical industry, porous titanium plate is used for catalysis, where the high surface area and pore structure allow for efficient chemical reactions. It is also used in filtration applications, such as air and water filters. Porous titanium plate can be manufactured using several techniques, including powder metallurgy, sintering, and electrochemical deposition. In powder metallurgy, titanium powder is mixed with a binder material and then pressed into a desired shape. The material is then sintered to remove the binder and fuse the titanium particles together. In electrochemical deposition, a layer of titanium is deposited onto a substrate using an electrochemical process. The resulting layer can be made porous by controlling the deposition parameters.

Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Parameters Material: titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm DI: 1MM above Features 1.High Strength-to-Weight Ratio. 2.Corrosion Resistance. 3.Biocompatibility. 4.Customizable Pore Size and Distribution. 5.High Temperature Resistance. Application Chemical Industry: Sintered porous titanium plates are used in chemical processing equipment, such as filters and catalysts, due to their resistance to corrosion and customizable pore size. Medical Industry: Sintered porous titanium plates are used in medical implants and prosthetics such as bone substitutes and dental implants� due to their biocompatibility, strength, and durability. Energy Industry: Sintered porous titanium plates are used in fuel cells and batteries due to their high strength-to-weight ratio and ability to conduct electricity. Environmental Industry: Sintered porous titanium plates are used in water treatment systems and air filters due to their customizable pore size and distribution and resistance to corrosion. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then mold pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.

Sintered porous titanium plate is a porous material made of titanium powder that is compressed and heated to create a solid block. The block is then treated with acid or other chemicals to remove any remaining impurities and create a porous structure. Product parameters Aperture size: 0.1~3mm Porosity: 30% 60% Thickness: 0.5mm 6mm Specific surface area: 100 1000m2/m3 Tensile strength: 300 600MPa Thermal conductivity: 2 20W/mK Application fields: widely used in aviation, automobiles, medical equipment, biological materials, filter materials and other fields Features 1. Efficient transmission of hydrogen: The highly porous structure of the porous titanium plate enables the effective transmission of hydrogen and has good gas transmission performance, which can significantly improve the efficiency of the water electrolysis hydrogen production system. 2. Lightweight and corrosion-resistant: The porous titanium plate is light in weight and is very suitable for making the transmission layer. At the same time, the titanium material can resist the corrosion of many acidic and alkaline media, and has a long life and stable performance. 3. Easy to clean: The porous titanium plate has a large opening rate and a large surface area, which is easy to clean and handle, and can effectively reduce the pollution of the water electrolysis hydrogen production system and reduce the impact on the environment. 4. Highly stable: The porous titanium plate has a long service life and high stability, and can keep its pore structure and performance unchanged, further improving the stability of the hydrogen production system, thereby meeting various needs of industrial and scientific laboratories. other apps 1. Medical field: Porous titanium plate has good biocompatibility and mechanical properties, and is widely used in medical fields such as orthopedics and dentistry, as artificial bone and dental implants. 2. Energy storage field: The large surface area and pore structure of porous titanium plates make them potential applications in capacitors, which can be used in the manufacture of electronic devices such as batteries and capacitors. 3. Sewage treatment field: The high specific surface area and good catalytic performance of porous titanium plates can be used in the field of sewage treatment, such as the oxidative degradation of organic wastewater and the adsorption of metal ions. 4. Environmental field: Porous titanium plates can be used to clean harmful gases and odorous substances in the atmosphere, and can also be used in environmental protection fields such as seawater desalination and water resource utilization. 5. Aerospace field: The lightweight and high strength of porous titanium plates can be used in the aerospace field, such as manufacturing aircraft, satellites and other components.

Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries. Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300â?? Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. 4. Has certain metal or alloy properties. Energy absorption, noise reduction, heat resistance, shock resistance, cushioning, heat conduction, electrical conduction, high strength and good toughness. Suitable for high pressure environment. Weldable and simple machining, easy loading and unloading. 5. Stable pore shape and uniform distribution ensure stable filtration performance. The regeneration performance is good, and the filtration performance recovers more than 90% after regeneration. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Such as: seawater desalination, sewage treatment, transformer oil, lubricating oil, fuel oil and other oils, organic solutions, inorganic solutions, medicinal liquids, beverages and other liquids; coarse and fine filtration; various gases, steam dust removal, sterilization, removal of oil mist ; Noise reduction, flame retardant, heat resistance, catalytic reaction, catalyst filtration, gas buffer, sweating and cooling, porous electrode, antifreeze device manufacturing, etc. Package and Shipment 1.� Titanium Plate Sintered Filters� are usually packed in cartons, wrapped in soft film,� fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic� bags no damage during� transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.

1. Manufacturing Technique Titanium sintered porous material is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. 2. Properties of titanium sintered porous materials: Pore diameter uniformity, pore stability, high separation efficiency. High porosity, low filtration resistance, and high permeability. Good chemical stability, acid, and alkali corrosion resistance, oxidation resistance. Morphological stability, no particle shedding, comply with food hygiene and pharmaceutical GMP requirements. Good mechanical properties, low differential pressure, large flow. Strong anti-microbial ability, does not interact with microorganisms. Online regeneration, easy cleaning, long service life. Excellent biocompatibility can be widely used in biological, food, pharmaceutical, medical industry. Excellent electromagnetic shielding performance. Good damping and shock resistance. 3. Application of titanium sintered porous materials Titanium sintered porous materials are mostly used for filtering materials, electrodes, heat transfer materials, catalyst carrier materials, noise-canceling materials according to their physical and structural properties. Decarburization filtration of pharmaceutical liquids. Electrolytic gas industry precision filtration, gas distribution. The medical industry makes biological implants. Water treatment industry odor sterilization filtration and ozone aeration. Clarification and filtration in food and beverage processing. Prefiltration of reverse osmosis system for the electronics industry. Terminal filtration of petroleum products in the petrochemical industry and filtration of carbonic alkali liquid in the chemical industry. High-pressure air filtration in the aerospace industry. Filtration and recovery of the precious metal catalysts in the fine chemical industry. The electrode matrix of a fuel cell. Catalyst carrier in gas and liquid catalytic reactions. 4.Precautions for the use of titanium sintered porous materials: During installation, disassembly and clean avoid scratches, collisions and falls on hard objects. When using, the filtrate is filtered from the outside in to avoid the reverse direction. Avoid instant pressurization when the filter element works. When the filtration efficiency is less than 50%, the filter element should be cleaned in time. When cleaning the filter element, the first backflow with pure gas, backflow pressure is 1.5 times the working pressure, each time for 3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5 minutes, repeat 2-3 times. If the filter element is not good after online back blowing and backwashing, it should be removed and cleaned in time.

Product Introduction Ultra-thin 0.6mm titanium porous transfer layer for hydrogen has a wide range of applications in hydrogen industry. In the hydrogen industry, these plates are used for hydrogen purification and separation, and they are an important component in many hydrogen-based technologies. Ultra-thin 0.6mm titanium porous transfer layer for hydrogen has good electrical conductivity, gas permeability, liquid permeability and chemical stability. In electrochemical systems such as fuel cells, the application of porous titanium plates can improve the energy conversion efficiency and stability of electrochemical systems, thereby promoting the development and application of electrochemical systems. Parameters Material: Gr1 titanium powder Purity: 99.6% Thickness:0.6mm Size: customized Application: PTL GDL in PEM electrolyzer Porosity: 35% Pore size: 20um Features High conductivity: Titanium is a good conductive material, and the porous titanium plate has excellent conductivity and can effectively transport electrons. High gas permeability: The porous titanium plate can control the parameters such as pore size and porosity to make it have high gas permeability, so that it can effectively transmit gases such as hydrogen and oxygen. Good liquid permeability: The pore structure of the porous titanium plate can control the transmission of liquid, so that it has high liquid permeability. High chemical stability: Titanium has good chemical stability and can operate stably for a long time in acidic or alkaline environments. Applications Hydrogen energy industry Gas filtration Oil and liquid filters Muffler Fuel Industry Catalyst filtration Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the customer's designated place without damage.

The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, formed by pressing the mold and sintered at high temperature in a vacuum. Product Parameters Filtration accuracy: 0.5um-50um Porosity: 30-40% Permeability: 3-800m3/m2hkPa Compressive strength: 2-3Mpa Temperature resistance: 300â?? Maximum working pressure difference: 0.6Mpa Features 1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good; 2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance; 3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life; 4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use; 5. Easy maintenance, good assembly, can be welded, bonded and machined; 6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment; 7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments.

Product Introduction Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed, and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300 Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Package and Shipment 1. Titanium Plate Sintered Filters are usually packed in cartons, wrapped in soft film, fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.

Product Introduction Sintered titanium plate is a kind of titanium product, which is widely used in various industries such as chemical industry, medical treatment and food processing due to its excellent corrosion resistance and high strength. The porous titanium plate produced using the sintering process is to press the titanium powder into the desired shape and then sinter at high temperature. Titanium powder particles link together during sintering to form a solid structure with interconnecting pores of specified size and shape. The sintered titanium plates produced have a high strength-to-weight ratio and are resistant to high temperatures and harsh chemical conditions. Sintered titanium plates can be tailored to suit customer needs, such as pore size, pore dispersion, and thickness. To meet a wide range of applications, we can also manufacture porous titanium plates with complex geometries such as cylindrical, conical, and flat shapes. To ensure product quality, we conduct strict tests on porous titanium plates, including pore size distribution analysis, compressive strength test and corrosion resistance test. Product parameters Filtration grade: 0.2-100um Thickness: above 1mm Shape: square, round, shaped Size: 300 800mm can be customized Pressure: 0.2Mpa Features 1. High strength and toughness: During the sintering process, the titanium powder particles are closely combined with each other, so that the sintered titanium plate has high strength and toughness, and can withstand certain impact and pressure. 2. Excellent corrosion resistance: Titanium itself has good corrosion resistance, and a uniform microporous structure can be formed through sintering, which further improves the corrosion resistance of titanium plates. 3. Can be made into complex shapes: through the sintering process, titanium sheets of various complex shapes and pore diameters can be made to meet the needs of different industries and applications. 4. Adjustable pore size and porosity: By adjusting the sintering process parameters, the pore size and porosity of the titanium sheet can be controlled to obtain the performance required for different applications such as filtration, separation, and adsorption. How to purchase porous sintered titanium plate A. Materials to be delivered; B. Corrosion problems; C. Special operating conditions involving pressure, temperature, etc.; D. Pollutants encountered; E. Required shape, dimensions and tolerances; F. Required flow and pressure allowed by the filter unit.

The production of PTL (porous titanium sintered plate) is a key component in the manufacture of hydrogen production electrolyzers. PTL is a type of electrode material that is used to catalyze the reaction that produces hydrogen gas from water. The resulting PTL porous titanium sintered plate is then coated with a catalyst material such as platinum or iridium, which helps to increase the efficiency of the hydrogen production reaction. The parameters of PTL (porous titanium sintered plate) used in hydrogen production electrolyzers can vary depending on the specific application and design of the electrolyzer. However, some common parameters for PTL porous titanium sintered plates used in hydrogen production electrolyzers include: 1.Porosity. 2.Pore size. 3.Thickness. 4.Catalyst loading. The PTL (porous titanium sintered plate) used in hydrogen production electrolyzers has several key features that make it an effective catalyst for the hydrogen production reaction. Some of the features of PTL porous titanium sintered plates include: 1.High surface area. 2.Corrosion resistance. 3.High conductivity. 4.Tailorable porosity. 5.Durable and long-lastinge. 6.Effective catalyst. The PTL (porous titanium sintered plate) used in hydrogen production electrolyzers has several important applications in various industrial processes. Some of the common applications of PTL porous titanium sintered plates include: 1.Hydrogen production: PTL plates serve as the catalyst for the hydrogen production reaction in electrolyzers, splitting water molecules into hydrogen and oxygen using an electric current. 2.Fuel cells: PTL plates are also used in fuel cells as an electrode material, facilitating the chemical reactions that produce electricity from hydrogen and oxygen. 3.Water treatment: PTL plates are used in water treatment applications to generate hydrogen peroxide or ozone for use as a disinfectant or oxidant. 4.Electrochemical synthesis: PTL plates can be used in various electrochemical synthesis processes to facilitate the production of chemicals and materials such as chlorine, caustic soda, and hydrogen peroxide. 5.Environmental remediation: PTL plates are used in environmental remediation applications to degrade contaminants such as chlorinated solvents and pesticides. Overall, the PTL porous titanium sintered plate is a versatile and important component in various industrial processes, providing efficient and reliable catalytic performance in a variety of applications.

Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.

Stainless steel pipe, stainless steel plate, stainless steel round bar ,stainless steel seamless pipe, titanium pipe, titanium plate, monel plate ,monel pipe, titanium wire , monel wire , monel seamless pipe ,stainless steel elbow, stainless steel circle .

TOPTITECH's 0.25mm Titanium Sheet enables seamless and efficient transport of reactants within the electrolysis cell. By acting as a PTL, it facilitates the smooth flow of water to the catalyst layers, ensuring effective electron conduction and removing generated oxygen gas. This promotes enhanced utilization of the catalyst layers, resulting in improved overall electrolysis efficiency and hydrogen production. Specifications Material: GR1 titanium powder Pore size/Filtration grade: 20um Size:100x100mm Thickness: 0.25mm Porosity: 40%-50% Technique: Sintering Features Enhanced Catalyst Layer Utilization Excellent Transport Properties Precise Thickness and Durability Seamless Integration and Compatibility Sustainable and Eco-Friendly The role of 0.25mm Titanium Sheet as PTL The 0.25mm Titanium Sheet plays a critical role as a Porous Transport Layer (PTL) within water electrolyzers, unlocking enhanced performance and efficiency in the electrolysis process. Efficient Reactant Transport Enhanced Gas Removal Effective Electron Conduction Structural Support and Stability Scalability and Compatibility

Ultra-thin 0.6mm titanium porous transfer layer for hydrogen has a wide range of applications in hydrogen industry. In the hydrogen industry, these plates are used for hydrogen purification and separation, and they are an important component in many hydrogen-based technologies. Ultra-thin 0.6mm titanium porous transfer layer for hydrogen has good electrical conductivity, gas permeability, liquid permeability and chemical stability. In electrochemical systems such as fuel cells, the application of porous titanium plates can improve the energy conversion efficiency and stability of electrochemical systems, thereby promoting the development and application of electrochemical systems. Parameters Material: Gr1 titanium powder Purity: 99.6% Thickness:0.6mm Size: customized Application: PTL GDL in PEM electrolyzer Porosity: 35% Pore size: 20um Features High conductivity: Titanium is a good conductive material, and the porous titanium plate has excellent conductivity and can effectively transport electrons. High gas permeability: The porous titanium plate can control the parameters such as pore size and porosity to make it have high gas permeability, so that it can effectively transmit gases such as hydrogen and oxygen. Good liquid permeability: The pore structure of the porous titanium plate can control the transmission of liquid, so that it has high liquid permeability. High chemical stability: Titanium has good chemical stability and can operate stably for a long time in acidic or alkaline environments. Applications Hydrogen energy industry Gas filtration Oil and liquid filters Muffler Fuel Industry Catalyst filtration

Sintered Titanium Porous Plate for Water is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. Sintered Titanium Porous Plate for Water has the characteristics of low density, high specific strength, good corrosion resistance and good biocompatibility. Parameters: Materials: pure titanium powder Filter rating: 0.22um-100um Porosity: 25-45% Working pressure: 2.5MPa