Hydraulic Rotary Joints Suppliers and Manufacturers

3/4"R - 1"R -1.1/4"R -1.1/2"R -2"R -3"R - 4"R 250 BAR 250 rpm

The following description of the products, various specifications, sizes, size can be customized, and provide drawings for reference, multiple road rotary joint gas road, water road, oil road mixed with non-interference. DVG-M42 2: Maximum pressure: 20Mpa Suitable medium: water, air, hydraulic oil, etc. Maximum speed: 20 r/min SR3/4 tow-channel rotary joint: Maximum pressure: 25Mpa Suitable medium: water, air, hydraulic oil, hydrogen, etc. Maximum speed: 120r/min SR1/2 Tower-channel pneumatic rotary joint: Maximum pressure: 10Mpa Suitable medium : water, air, hydraulic oil, etc. Maximum speed: 800r/min SRM27 2 Four-channel hydraulic rotary joint: Maximum pressure: 30Mpa Suitable medium: water, air, hydraulic oil Maximum speed: 10r/min SR1/4 Two-channel hydraulic rotary joint: Maximum pressure: 25Mpa Suitable medium: water, air, hydraulic oil, etc. Maximum speed: 20r/min SR1 Right angle hydraulic rotary joint: Maximum pressure: 15Mpa Suitable medium: water, air, oil, etc. Maximum speed: 10r/min SRM12 1.25 Right angle hydraulic rotary joint: Maximum pressure: 12Mpa Suitable medium: water, air, oil, etc. Maximum speed: 10r/m SR3/4 Right angle hydraulic rotary joint: Maximum pressure: 20Mpa Suitable medium: water, air, oil, etc. Maximum speed: 30r/min SR Straight through type hydraulic rotary joint: Maximum pressure: 15Mpa Suitable medium: water, air, oil, etc. Maximum speed: 15r/min Specification: 50,65,80,100,125,150,200,250,320,400,500 SR1 Straight through type rotary joint: Maximum pressure: 6Mpa Suitable medium: water, air, hydraulic oil, etc. Maximum speed: 100r/min (Normal) 200-3000r/min (High Speed) M22 1.5 Right angle hydraulic rotary joint: Maximum pressure: 15Mpa Suitable medium: water, air, vacuum, etc. Maximum speed: 3000r/min Beijing University of Aeronautics and Astronautics Flange connection typem Maximum pressure: 1.5Mpa Suitable medium: water, air, vacuum, etc. Maximum speed: 3000r/min Dongguan two channel rotary joint Intermediate through hole type M16 2 Maximum pressure: 25Mpa Suitable medium : water, Hydraulic oil, air, Hydrogen, etc. Maximum speed: 60r/min Hebei two through connector M22 1.5-M18 1.5 Maximum pressure: hydraulic oil, water, air, hydrogen, etc. Maximum speed: 60r/min Zhuhai two through connector Intermediate through hole type G1/8 Maximum pressure: 25Mpa Suitable medium: Hydraulic oil, water, air, Hydrogen, etc. Maximum speed: 60r/min Jiangsu two more into rotary joint Two in twenty out rotary joint 1/2-33/8 Maximum pressure: 1.6Moa Suitable medium: oil, water, gas, etc. Maximum speed: 60r/min Fujian Auto Central rotary joint Five-channel NS2 2 Maximum pressure: 35Mpa Suitable medium: air, hydraulic oil, etc. Maximum speed: 15r/min Excavator Central rotary joint 1/2 nine-channel Maximum pressure: 50Mpa Suitable medium: hydraulic oil, air, etc. Maximum speed: 15r/min.

Structural features: Rotary joints of this type are designed mainly for the cooling system. It possesses various advantages like small size, light weight, low friction torque and balanced sealing structure.

K Series are multi-way rotary joints designed for middle and high speed high-pressure applications. They are used on machining center revolving tables, hydraulic workstations, coiling machines, wind generators, centrifugal machines and etc. ial carbon steel. If other material is required, please inform beforehand. Main Features: Supported by double high-precision maintenance-free bearings for high stability. Special sealing structure designed for high-speed and high-pressure application that provides prolonged failure-free operation. Low rotation torque. Special structure to be free from friction heat under high speed. Running torque unaffected by working pressure and temperature change. Max working speed up to 6500RPM. Drainage hole design to avoid exterior contamination. Customization available for different customer applications. Technical Ratings Max Speedï¼?6500 r/min Temperatureï¼?-30ï½?+80 Max Pressureï¼?30Mpa Mediaï¼?Hydraulic Oil Notes: 1.K Series use labyrinth sealing structure. During installation and operation, the drainage hole L must be connected by oil pipe to the oil collection tank. And the oil pipe must not be blocked to avoid back-pressure. 2.Inner leakage is allowed between each passage. Please pay attention to the compatibility of different working media to avoid crossed contamination. 3.The working fluid or hydraulic media should be filtered before being ued. The filtration precision should be no lower than 10um. 4.Working temperature rise will reduce the viscosity of the working fluid to increase the leakage volume. So during operation, cooling device should be accompanied. 5.The hydraulic system should be equipped with automatic pressure regulator to compensate the pressure loss caused by inner leakage.

Hydraulic rotary joints, valves.

Hydraulic cylinders, power packs and rotary joints.Manufacturing

We are supplier and exporter of Hydraulic Oil. Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs. Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.

1. High quality rotary joints and two delicate bearing installed in high stiffness rotor are to ensure vibration-free performance in long-term operation. 2. Rotors undergo special heat treatment to increase stiffness. 3. Stationary ring enclosure is made out of concentrated carbon graphite, anti-wear-out, waterproof, and suitable for dry operation. 4. Especially the area of rotating sealing faces has to be minimized to the minimum, even under higher-pressure environment. 5. The effect of equilibrium in sealing face from accumulation of our company experiences in mechanics is the best. 6. Adaptation of stationary ring made out of bronze in RF-type rotating connector is for the use in high-pressure 200 bar.

í+ recommended operating specifications 1. Max. Hydraulic pressure : 210 bar (50rpm) 2. Max. Air pressure : 10 bar 2. Max. Temperature : 100ój 3. Max. Speed : 750rpm í¦ all models available with the following options 1. Shaft : alloy steel 2. Housing : alloy steel 3. Standard threads : rc

We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%

Jerry Can ( Blow molding Process) Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding.

Plastic Floating Dock ( Blow molding process) Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding.

Road Barrier ( roto Molding Process). Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding.

Rectangular Bin (Roto Molding process) Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding.

Rectangular Bin( roto Molding Process) Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding.

Product’s name: Injection mold Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding. We also undertake injection, blow or rotary molding works from Toys to Big bins or water tanks, floating docks, road barrier etc. We can do custom design plastic parts or components. Water Tanks ( Roto Molding process)