Hydraulic Cylinder For Rotary Drilling Rig Suppliers and Manufacturers

Usage: Automation and Control Power: Hydraulic Cylinder Diameter: 200mm Pressure: 220bar Origin: Hengyang Hunan Material: Steel Structure: Piston Cylinder Standard: Nonstandard Stroke: 1936mm Trademark: Tedayy HS Code: 841221000 Product Description Hydraulic cylinder for rotary drilling rig, well to custom-made!

Characteristics of XY-8 hydraulic core drilling rig ·Machine adopts pneumatic shift Fastgear 8JS118 auto transmission and clutch, compact structure, smooth operation, stable performance, good wild card. ·Using auto-control flexible-shaft shift agency, we achieve the long-distance transmission shift. The pneumatic shift is light and agile, and has the advantage of hommization. ·Reasonable speed range and many speed radixes (8 forward speed, 1 reverse speed), with low-speed it has big torque (Max. up to 8000N.m). ·Using concentrated forced lubrication system, as long as the rig runs, the separate lubrication oil pump starts working and sends lubrication oil to each node that requires lubrication. When the oil lubricates drive mechanism, it will also take away the heat inside, (lubrication system with separate condenser), to prevent the components from heat caused by high-speed high-load state. ·The rig adopts vertical shaft instead of the traditional hexagonal vertical shaft, exponentially increasing gyrator transmission efficiency and carrying capacity . And new spindle shaft has big hole diameter (96 mm), with twin cylinder hydraulic feed the trip is much longer (up to 1000mm), especially suitable for large diameter drill pipe wireline coring, help to improve drilling efficiency and reduce the hole accident. ·Light weight and can be disassembled to many parts, net weight 6500Kg. ·The chuck is hydraulic-release normally closed hydraulic chuck, new structure, good compensatory. Carbide inset&welded slip structure, has large clamping force, long life, reliable operation. ·With water brake, in deep hole drilling, its safer and more smooth to put down the drill pipe. ·hydraulic oil is supplied by gear oil pump, less power consumption, and the hydraulic system oil temperature is low and stable work. The system is equipped with a hand pump. When power machine can not work, workers can still use hand pump to lift tools from the bottom of the hole, in order to avoid burying accidents ·Advanced and compact structure, reasonable layout, all components are revealed outside, do not overlap, ease of maintenance, maintenance and repair. ·The rig has a low center of gravity and long backward stroke (up to 530mm). Easy to be fixed on tower base, the rig has good stability in high-speed drilling. ·With shockproof meter, its easy to observe hole situation. Control-handles are in reasonable layout, operation is flexible and reliable.

1. Applications of XYX-130 wheeled drilling rig Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners. 2.Features of XYX-130 wheeled hydraulic drilling rig The rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move. Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency. The drill rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable. The rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process.

1. Applications of HZ-130Y Hydraulic Rotary Drilling Rig geological survey and exploration, basic exploration for roads high-rise buildings, inspection holes for various concrete structures, river embankments grouting holes direct grouting, civil water well ground temperature central air conditioners. 2.Features of HZ-130Y Hydraulic Rotary Drilling Rig Hoist installation holder, forming structure of double support wheel, can withstand strong impact. Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer. This machine adopts the conical clutch of national patent technology, which has the characteristics of large transmission torque, convenient operation and no maintenance required. Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission

1. Characteristic of XYC-200A tricycle-mounted drilling rig XYC-200A tricycle drilling rigs is multi-function hydraulic vehicle-mounted rotary drilling machine . The tricycle is Tricar 7YP-1475D1. The drilling rig, engine, BW-160 pump and hydraulic drill tower are all installed on the tricycle, so it us easy for transportation. XYC-200A drilling rigs with BW160 pump which has high pressure and high flux, to ensure the drilling depth and hole diameter. The tricycle drilling rig is equipped with shift unit,so the drilling rig can move back and forth The highest speed can reach 1045r/min with 5 gears, which improves the drilling efficiency The rig is Adopted 53x59 drilling rod, which has high rigidity and strong delivery torque Equipped with national patent technology---taper clutch, made the machine easy to operate and free of maintenance. Use large module planetary gear and add supporting frame, highly increased hoisting and braking ability of the winch. Vertical spindle are fixed by four groups of bearings to ensure that the rotary machine is rigid enough for gravel layer and other complex geological conditions.

1. Characteristics of XYC-200 vehicle-mounted drilling rig XYC-200 is a multi-function hydraulic vehicle-mounted rotary drilling rig. the Tang Jun automobile chassis chassis, transmission system and rig winch, mud pump and other important accessories installed in the chassis. the layout is reasonable, compact, and easy to operate. It is equipped with high pressure,big flow BW160mudpump,which can ensure drilling depth and diameter. the rig has shifting device,  it can move on the vehicle and is convenient to operate while drilling. the hydraulic folding mast is safe and convenient to transport 2.Applications of XYC-200 drilling rig road and high-rise building foundation exploration all kinds of concrete structure inspection holes river embankments subgrade grouting holes drilling and direct grouting civil water well ground temperature central air conditioners.

1. Characteristic of XYD-200 Crawler drilling rig drilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control super nation of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits. the chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car bodys shake,reduce the oil consumption.It can walk on the pavement of city and dont hurt the pavement. the chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs install rate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working. using 48V electric starting diesel engine is reduced the operates labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly. the machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country.

1. Characteristic of XYX-200 wheeled drilling rig hydraulic cylinder, high efficiency wheeled walking mechanism, very convenient for transport and adjusting the drilling rig level. pressure gauge display the condition of the bottom of the drill hole. the machine is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. the working efficiency is high and the operation is convenient, safe and reliable.

1. Features of HZ-200YY hydraulic drilling rig the highest speed can reach 1045r/min with 5 gears, which improves drilling efficiency adopted 53x59 drilling rod, which has high rigidity and strong delivery torque. equipped with national patent technology-taper clutch, made the machine easy to operate and free of maintenance. using large module planetary gear and adding supporting frame, which highly increased hoisting and braking ability of the winch. vertical spindle are fixed by four groups of bearings to ensure that the rotary machine is rigid enough for gravel layer and other complex geological conditions.

1.The features of XYD-130 crawler drilling rig The drilling rig adopts the automatic Telescopic style with two high strength oil cylinder support, a set of hydraulic valve control rigs operating supine, which is time-saving, safe and reliable to maximize the benefits for users. The chassis adopts rubber track, light weight and low life cycle cost, which can reduce noise of vehicle running mechanism, reduce car body vibration, and reduce fuel consumption greatly. It can walk on urban roads without hurting the road surface. The chassis is equipped with four high strength threaded legs (or hydraulic high leg). The installation and adjustment is fast and convenient. It can be used for leveling of work plane, loading and unloading vehicle, which reduces the hoisting cost and improves efficiency and works as auxiliary support. The rig uses 48V electricty to start the diesel engine , which greatly reduces the labor usage, especially in the cold season. When the diesel engine has difficulty activiting, this starting mode shows greater advantages. 2.Technical parameters of XYD-130 crawler drilling rig XYD-130 crawler drilling rig Drilling depth 130m Maximum opening diameter 220mm Diameter of the end hole 75mm Drilling rod caliber 50mm Drilling angle 90°-75° Drill weight (no include power) 2600kg Spindle  Spindle speed 142/285/570 r/min Spindle stroke 450mm Hoist Max single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64 m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type horizontal single urn twin-action Displacement 95 /77L/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm

Fes supplies ytr series rotary driling rigs which incorporate high quality global parts and components, including: caterpillar base carrier, brevini gear box and rexroth motors, etc. The rigs range from 80knm to 400knm in torque. Since

Series ytr rotary drilling rig is one kind of high efficiency pile hole construction drilling rig that suitable for the construction of base piles such as bridges, railroads, and building construction, of which the products features high hole drilling efficiency, power-saving, environmental protection, low machine malfunction rate, and high reliability.

Overview: Rotary Drilling Rig is a self-running ground drilling equipment, including drilling rig and crawler car, which completes the drilling through the rotation, excavation, lifting, soil unloading of drill. It plays a vital role in varied foundation works of industrial infrastructure, such as concrete pouring pile, continuous wall. Application: Widely used for drilling and grouting in urban high-rise buildings, railways, highways, bridges, tunnels, airports, ports and other pile foundation engineering. Features: Diesel powered with higher work efficiency; Highly integrated body without installation; Can freely rotate to 360and move easily; No dust and mud pollution while high-speed drilling.

The main technical level of Down-Hole Drilling Rig, with nine patents, has remain the international advanced level. The notable features are as follows: 1. Integration of drilling mechanism, air-compressed supplying system and power group provide improved maneuverability, energy saving and high efficiency. 2. Parts worldwide procurement, chose from well-known brands, actualize the higher efficiency and reliability. 3. Pilot handles control all the machine operations, the various movements and speeds can be adjusted at any time. All of above make sure the machine operate normally and accurately. 4. High reliable crawler traveling system, hydraulic motor driving drilling rod ,and hydraulic cylinder supported sliding rack optimize working efficiency and machine adaptability. 5. Hydraulic disassembly mechanism for impact ,drilling system ,drilling bit. 6. High effective dust collection device and the anti-hoisting device, which is the original patent at home and abroad, improve the working environment effectively. 7. High effective dust collection device and the anti-hoisting device, which is the original patent at home and abroad, improve the working environment effectively. 8. The domestic unique auto block-prevention mechanism can lift the drill stem automatically when the stem got stuck, making the stoppage much less than before. 9. The patent technology self-adaptive control to the force on the drilling process, cooperating with the auto-sensing control to various rock conditions and decrease the block faults. Nude package for main machinery.

MODEL C650D-EXP BLASTHOLE DRILL SPECIFICATIONS RATED CAPACITY : Nominal hole size 7-7/8¡¨(200 mm ) by Rotary method, Upto a depth of 148¡¦ (45.12 m) using 30¡¦ long 6.25¡¨ OD drill pipes. STANDARD MOUNTING : Tengl, India make Under Carriage model T23/D4 , 24¡¨ Triple grouser track 10¡¦ 6¡¨ long with 9 bottom rollers and 2 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 3.0 KMPH on plains and 1.5 KMPH on grades. Gradeability up to 25% grades with Mast down. PULLDOWN AND HOIST : Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement. 33¡¦ head travel for handling 30¡¦ long drill pipe. Pulldown capacity : 35,000 LBS. Hoisting capacity : 20,000 LBS. Standard feed rate : 14 FPM Standard hoist rate : 25 FPM Fast feed rate : 70 FPM Fast hoist rate : 124 FPM MAST :Electrically welded square and rectangular steel mast of robust construction to withstand adverse drilling conditions. Mast is raised and lowered by two hydraulic cylinders with safety check valves. Working height of mast 38¡¦ for 30¡¦ long drill pipe. ROTARY HEAD :Axial piston hydraulic motor driven top head drive through spur gear reduction with a constant torque of 48,000 Inch-pounds at 0-150 RPM infinitely variable speed. AIR COMPRESSOR :Screw compressor with a capacity of 900 CFM at 100 PSI. Air oil receiver, Oil cooler, Oil filters and safety valves are provided as standard. PRIME MOVER : Cummins India make engine NTA 855C running @ 1800 RPM drives compressor @ flywheel end and hyd. pumps @ front PTO. Fuel tank capacity : 750 lit. DRILL PIPE HANDLING : Hydraulically operated Four pod loader suitable for handling 6.25¡¨ OD x 30¡¦ long drill Hydraulic power breakout wrench and stem wrench are provided as standard. HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, Fan, auxiliary and pilot circuits. Axial piston ,variable volume pump: 48 US GPM at 4700 PSI for tram circuit and at 4200 PSI for rotation circuit. Axial piston pump : 12 US GPM at 2500 PSI for feed circuit. Gear pump for ROC fan : 22 US GPM at 3000 PSI for ROC fan circuit and 15 US GPM at 2000 PSI for auxiliary circuit. Hydraulic oil reservoir with suction strainers and 10 micron return line filters. Relief valves in all circuits. LEVELLING JACKS : Three hydraulic jacks - one front 140 MM bore, 48¡¨ stroke; two rear 125 MM bore, 36¡¨ stroke equipped with heavyduty telescopic guide tubes and lock check valves for safety. OPERATOR¡¦S CAB :Fully enclosed spacious steel fabricated, sound suppressed, thermal insulated, Air-conditioned and safety glassed cab with centralised controls for operator¡¦s convenience. Adjustable seat for operator¡¦s comfort and a seat for Helper. DUST CONTROL SYSTEM : NVE type dust control system, equipped with hydraulic motor driven blower and dry type filters. NIGHT LIGHTING : Adequate lighting to enable operation of drill at night times. Lights powered by engine alternator at 24V, DC supply. WEIGHT AND DIMENSIONS :(Approx.) Length(mast down) : 43¡¦ 0¡¨ Length(mast up) : 32¡¦ 0¡¨ Width : 14¡¦ 2¡¨ Height(mast down) : 16¡¦ 0¡¨ Height(mast up) : 42¡¦ 6¡¨ Operating Weight : 73,500 LBS OPTIONAL EQUIPMENT: Centralised Lubrication system Shock sub for rotary head Rotary Deck Bushing Hyd powered winch Electronic depth counter Automatic Power breakout system Fire detection and suppression system Fast fuelling system Retractable dust curtain Water injection system with water tank Angle hole drilling kit upto 25„a in steps of 5„a. 122

Our company mainly produces excavator hydraulic cylinders, forklift hydraulic cylinders, and currently cooperates with Sany and XCMG.

FY 130 hydraulic wheeled water well drilling rig: Drilling depth 130 meters Drilling diameter 100-219 mm Travel speed 3 km/h Working pressure 1.45-2.5 Drilling speed 10-35 m/h Dimensions 3850x1560x2050 mm

We provide reliable mud pump 100% interchangeable spare parts (Liner, piston, valve&seat, Pulsation Dampener, Fluid End Module) Lake Petro provides the mud pump in accord with API specifications, as per international standards and requirements. Our product offering is extensively used in drilling and fracturing for oil and water well, including F series, P series, NB series, BW series and TWS series.