1. The whole machine is sheet plate welded structure .To eliminate the internal stress, vibration aging technology is adapted. The machine bears the characteristics of high strength and good rigidity.
2. Double hydraulic oil cylinder is applied for upper transmission ,provided with mechanical limit stopper and synchronous torsion bar, typical of stable and reliable operation, as well as high precision.
3. Electrical control and manual fine-tuning mode are adopted for distance of rear stopper and stroke of gliding block ,and fitted with digital device ,easy and quick in use.
4. Upper die is fitted with deflection compensation device.
Ps67y machine model is adopted for mainframe, fitted with digital display system.
The machine is provided digital display for the positions of rear stopper and gliding block, as well as prompting function for soft limit of x/y shaft and one-way positioning clearance.
Rear stopper and uppper gliding block are both fitted with coders, for a more accurate display for positions of rear stopper and upper gliding block in cooperation with digital display system, thus to further increase the operating precision of this machine.
Ps67y machine model is adopted for mainframe, fitted with digital display system.
The machine is provided digital display for the positions of rear stopper and gliding block, as well as prompting function for soft limit of x/y shaft and one-way positioning clearance.
-rear stopper and uppper gliding block are both fitted with coders, for a more accurate display for positions of rear stopper and upper gliding block in cooperation with digital display system, thus to further increase the operating precision of this machine.
HYDRAULIC PRESS BRAKE MACHINE
We Have Been Manufacturing A Wide Range Of Hydraulic Press Brake Machine. These Machines Are Easy To Install And Requires Low Maintenance. We Develop These Machines With The Aid Of Latest Technology, So That The End Product Conforms To Set Industry Norms.
FEATURES :
Repetitive accuracy is within 0.03 mm.
Three cycles of operation.
Inch-single-continuous cycles for greater operator convenience.
Full powered stroke make machine suitable for general sheet metal press work.
Three speeds reduce idle travel time, improves productivity.
Instant ram stoppage prevents accidents and job rejections.
Noiseless operation and least impact loads on tools and foundations.
Less power consumption, least wear and maintenance reduces operating costs and down time.
DESIGN FEATURES
Mono Block Welded Steel Frame ultra tested-2062 steel plates rigid to provide accurate bending.
All pivots have been hardened of ground pin bushes of five piece guide slide lubricated by central hand pump.
Repetitive accuracy is within �± 0.03 mm
Ram travel parellelism without sensitive & complex servo hydraulics.
Most reliable hydraulic components & sealing for international reputed design for 350 bar against operating pressure of 160 bar maximum.
Three cycles operation inch, Single cycle & Auto for greater operator convenience.
Three speed operation reduces ideal travel time which improves productivity.
Bending force easily adjustable from front for forgue tools of bending soft material.
Movable operator console is provided with switches for cycle selection, ram up-down travel, emergency stop & motor on/off.
Manual backstop with micro adjustable swing stop facilitate reverse bend.
Electrical panels & components are provided as per international reputed brands.
Precisely designed of manufacture cylinders provided unlimited trouble -free life. Seals can be changed quickly without dismanting the ram or need of crane.
STANDARD FEATURES & ACCESSORIES
Main drive standard make motor.
Electrical control panel with three speed inch,
Single cycle, Auto mode of operation. Two front sheet supports.
Manual back gauge with micro-adjustment swing stoppers. Pair of lifting chains.
Fine stroke adjustment rod with limit switches.
One suitable 5-way die and blade. (Segmented or full length, EN-9 not covered under warranty).
Movable console with emergency device.
Manual centralized lubrication system with hand pump.
Bending chart.
OPTIONAL ACCESSORIES
Ram tilting arrangement.
Motorized back gauge with DRO.
Extra Finger for standard Back gauge.
Automatic Lubrication System.
Extra Depth of throat.
Miniature models, 0.6 meter & 1.2 meter. 20 tons, 25 tons, 40 tons models. Compact. Highly suited for our own sheet punching tooling system. Can be used as press or press brake.
* Torsion Arm-to maintain parallelism of press beam.
* Motorised mechanical depth stops inside the cylinder with handwheel fine adjustment with read out.
* Electrical panel with manual and auto operation.
* Remote adjustable working pressure.
* Foot pedal.
* Easy operation.
Step movement (+/- 20 seconds per month accuracy)
Big Japanese Display showing Day
Date
Month
Year? and Temperature
Function. Quartz Movement with Citizen Brand Crystal for Accurate Timing
Calendar Clock
1 year warranty
Step movement (+/- 20 seconds per month accuracy)
Big Japanese Display showing Day
Date
Month
Year and Temperature
Function. Quartz Movement with Citizen Brand Crystal for Accurate Timing
Calendar Clock
1 year warranty
Hydraulic bending machine forming is an efficient and versatile method of forming sheet metal. The process utilizes the force of hydraulic cylinders to apply pressure and bend the material into the desired shape. With precise controls and adjustable settings, hydraulic press brakes forming offers superior accuracy and repeatability, making it ideal for a variety of industries including automotive, aerospace and construction. Whether it's creating crisp angles, complex curves or straight bends, hydraulic press brake forming provides the flexibility and precision needed for a variety of metal fabrication projects. With advanced technology and innovative features, hydraulic press brake forming enables manufacturers to realize complex designs, meet tight tolerances and produce high-quality finished products.
Product Description
Automatic Grade
Automatic , Semi-Automatic, Manual
Max Sheet Width
1 Meter, 2 Meter, 3 Meter, 4 Meter, 5 Meter, >5 Meter
Cutting Load
0-30 Ton, 30-60 Ton, 60-90 Ton, 90-120 Ton, 120-150 Ton, >150 Ton
Brand
Monotech
Control Type
CNC, Non-CNC
Max Force Or Load
0-30 Ton, 30-60 Ton, 60-90 Ton, 90-120 Ton
Minimum Order Quantity
1 Unit
We at MONOTECH offers heavy welded frames and the latest in motors and controls. Designed with Finite Element CAD and manufactured under the most stringent technologies, these machines deliver affordable performance and quality. This combined with superior support and service, make MONOTECH Hydraulic Press Brakes a clear investment in increased productivity.
Large stroke and the open height
Long back gauge reach
Fast ram speeds
High accuracy ram positioning
Features:
Technologically advanced
High performance
Less maintenance
Our range of products include Hydraulic Press Brakes such as Mechanical Press Brakes and Hydraulic Press Brakes.
Our organization is counted amongst the most distinguished manufacturers and suppliers of Hydraulic Press Brakes. These brakes are ideal for heavy duty applications in gears, couplings, bearings, wheels and pulleys. Furthermore, we offer necessary attachments to simplify the working of the hydraulic pullers.
Features:
High performance
Low maintenance
Longer service life
Specifications :
Main Motor:7.5KW
Ram Stroke:250mm
Raw Material:Q235steel
Main application and features
Press brake is kind of machine used in cold-forming metal sheet or strip into a desired cross section or structural shape. Normally, with one bending, metal sheet could be bend into cross section. With several bending, it can get complex sectional shaps. It is wildly used in machinery, light industry, automobile, shipbuilding, container, crane, building construction, metal construction, lamppost and electrical post, and so on.
Totally european design, streamlined looking
-frame consists of right and left wall boards, working table, oil tank, slot steel and etc. The stress of the welded parts can be eliminated by vibration. The machine enjoys high accuracy and high strength and can be transported easily
-welded structure: the stress of the welded parts can be eliminated by vibration; so this forging press gives high accuracy.
- high accuracy, high efficiency, simple and convenient operation, good performance, favorable price and best service.
Reliable hydraulic system
- adopt integrated hydraulic control system, more reliable and easy for maintenance. The hydraulic system consists of motor, oil pump and valve groups and it is installed at the top of the oil tank.
- every complete working cycle can be achieved through the control of hydraulic valve.
-extremely reliable and precise rexroth or vickers or bosch valves are used for the regulating circuit.
-there is also a low sound lever pump and a large tank with oil level and temperature gauge on the oil filter.
- overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level can be read and seen directly.
Electro-hydraulic CNC Press Brake is in an overall welding and overall processing structure, and the main parts of machine are all analyzed by ANSYS finite element analysis software, which has ensured the reliability of machine and the precision of entire machine.
The CNC control system adopts , ESA, or Swiss CYBELEC products, which can achieve the functions of graphic programming for bending angle, compensation for angle amendment, automatic calculation also adjustment of bending pressure, automatic calculation of compensation for workbench distortion, extending length of workpieces, bending pressure for bottom bending, open distance, and automatic withdrawal of rear stopper, etc.
Standard configuration:
1. 4+1 axis (Y1, Y2, X, R +V axis)
2. CNC system: DELEM DA-53T
3. Hydraulic system: German Rexroth (Italy DUPLOMATIC)
4. Grating ruler: GIVI optical scale
5. Ball screw:
6. Linear guide rail:
7. Main electrical components: Schneider
8. Compensation method: mechanical compensation
HOSTON press brakes offer exceptional performance and manufacturing solutions tailored to the Customer needs. The machine tool HOSTON have been manufactured with the ability of listening and understand customer needs. The technological innovation and the continuous search for reliable and indestructible components make these machines for sheet metal working able to improve time business and production costs. Safety in the workplace is invaluable for us. We manufacture SAFE machines! Operators can work with confidence thanks to the vehicle control systems, the worldwide leader in safety. The wide range of press brakes HOSTON varies by working force, size and production capacity.
WC67K CNC Hydraulic Press Break
1.Integrated hydraulic control system.
2.Imported Japan brand sealing components.
3.Steel torsion bar synchro press brake and CNC control system.
The whole structure of the hydraulic press brake:
-Welded structure: the stress of the welded parts can be eliminated by vibration; so this forging press gives high accuracy.
-Frame: consist of right and left wall boards, working table, oil box, slot steel and etc., with high strength
Hydraulic system:
-Adopt integrated hydraulic control system, more reliable.
-Consist of motor, oil pump and valve groups.
-Be installed at the top of the oil box, which can assure that the cylinder is always full of oil when the slide is moving down at high speed.
-Complete working cycle can be realized through the control of hydraulic valve.
-The working pressure at the right side of the wall board can be adjusted by the remote adjustment valve.
The main sealing components of the cylinder:
- Imported Japan brand products.
Synchro control system:
-Slide syncho system: adopt steel torsion bar synchro system, simple in structure and high in accuracy.
-2 ends of slide have 2 synchro forks.
-Adopt upper die compensation to improve the brake precision.
CNC system (Computer Numerical Control):
-The DA-41 control offers a complete solution for conventional press brake.
-Applications, including the axes control for 2 axes, the press beam and backgauge and flexible I/O configuration.
-Besides those systems from DELEM, CYBELEC products are also available for your choice.
Cold pressing involves extracting oil from seeds, nuts, or fruits without using heat or chemicals. The mechanical process (often using a hydraulic press) operates at a low temperature to ensure that the oil retains its natural flavor, aroma, and nutritional value. We offer Cold-pressed oils like peanuts, coconut, sesame oil, mustard oil and sunflower oil. They are gaining popularity due to their properties and health benefits.
Characteristics:
Maintains most of the oils natural nutrients, including vitamins, antioxidants, and healthy fats.
Has a more robust flavor and aroma compared to oils processed with heat.
Generally more expensive due to the less efficient extraction process and lower yields.
Uses:
Often used in salad dressings, marinades, and dips where the flavor of the oil can be appreciated.
Not typically used for high-heat cooking due to its lower smoke point compared to refined oils.
Type Charger
Charging Port 1port
Connection Type-A
Warranty 12 months
Place of Origin Guangdong, China
Combination Charger
Voltage 12-24v
Brand Name Yujie
Model Number YJ-DS
Design Style Charge
Product Name usbc 12v socket
Material ABS
Output current 2.1A
Output voltage 5V
Digital display color Blue
Product Color Black
Usage Car/Boat
Size 37*29*53mm
Net weight 0.0261KG
Gross weight 0.035KG
Iraq Arabic Date seeds removing machine /red date seeds removing machine for 20kind fruit stone /core removing machine can removing these fruit stone or seeds :
Red date/Peach and apricot /
Green plum /Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine
Olive /Li Zi /Nut and butter/Litchi/ Pear
Technolgy features:
1. This new type of jujube core remover has strong wear resistance and is not easy to damage parts.
2. The base plate of this coconut kernel remover is made of silica gel cup, which does not damage the fruit. At the same time, it overcomes the danger of the needle seat type and the weakness of the complex operation of the tablet pressing type.
3. The equipment has the characteristics of small pore size, more pulp, clean and no residual core.
4. The bottom is equipped with a moving wheel device, which is convenient to move. At the same time, it is equipped with brake device, which is easy to fix.
5. The chassis is packaged in stainless steel, which is beautiful and generous.
