Hot Stamping Machine Suppliers and Manufacturers

Infrared heating technology ,user friendly and less working cost wooden casing

Usage: This Hydraulic automatic large size hot stamping machine can print PVC, PET film, paper, diploma cover, card invitation letter, wedding card, folder, plastics, leather, book cover, gift, wood, film, electronic products, etc.Large pressure 20T suit for gilding and emboss on leather, plastic, wood, glass, paper and metal such flat things. Specification: HC-H-1115 Hydraulic automatic hot stamping machine Max print size: 12*16 inch (300*400 mm) Worktable size: 20*16 ½ inch (500*420 mm) Stamp head stroke: 2.76 inch (60mm) Max print speed:1200pcs/hr Foil feed: motor drive Printing temperature:0 to 380 Heating power: 1600 W pressure: 20 000 Kg 20T or 40 000kg(40T) HC-H-1515 Automatic big size hot stamp machine Max print size : 15.7*15.7 inch (400*400 mm) Worktable size: 19.6*25.6 inch (500*650mm) Max print speed:1200pcs/hr Stamp head stroke: 2.76 inch (70mm) Heating power: 6*500 W HC-H-1519 Automatic high pressure bronzing machine Max print size : 15.7*19.7 inch (400*500 mm) Worktable size: 31.5*20.5 inch (800*520mm) Max print speed: 1200pcs/hr Stamp head stroke: 2.76 inch (70mm) Heating power: 6*800 W HC-H-1523 Automatic plane hot stamp machine Max print size : 15.7*23.6 inch (400*600 mm) Worktable size: 31.5*20.5 inch (800*520mm) Max print speed: 1200pcs/hr Stamp head stroke: 2.76 inch (70mm) Heating power: 6*800 W Advantages: 1) Foil feed and collected automatically, high output. 2) Automatic stamping process, putting and taking off article by hand, other process done fully automatically. 3) Vertical pressure cylinder design to make high and stable high pressure max can be 20 000 Kg. 4) Temperature controller heat to ensure stable printing temperature. 5) Worktable can be adjusted accurately XYZ and angle. 6) Stamping head can be fine adjusted makes bronzing more precision. 7) Print speed, pressure, temperature and time are adjustable. 8) Manual and automatic two printing modes are optional.

The TL780 Automatic Foil Stamping and Die Cutting Machine is designed for the Hot Stamping, Die Cutting, Pressing Convex and Creasing etc technics, ití»s suitable for paper, cardboard, plastic film and so on. It can finish feeding, die cutting, collecting work cycle automatically. 2. The machine is composed of four parts: main motor, hot stamping, auto feeder and electric equipment. The motorí»s main transmission is by bend shaft structure driving the platen running up and down, plus the pressure adjusting structure, coordinate to finish hot stamping or die cutting job. 3. The electrical parts are composed of main motor control, feeder/collect control and foil feeder control and so on. The whole machine is controlled by micro processor. 4. The machine is equipped with the automatic lubrication system Overall machine dimensions(mm) 2700í-1820í-2020

Hot-stamping machine Application : Business card, envelope, season greeting card and label Hot-stamping signing bar for credit card. Vip card, phone card. Ticket card... And various kinds of plastic cards and printing for shell. Size of the machine(mm) : 1140*540*600 Printing speed(sheet/hour) : 2100/4200 Max.Sheet size(mm) : 100*180 Max.Printingarea(mm) : 95*150 Power required 110/220v 1 phase for : 1/2hp motot Machine weight : Nw,170kgs Gw,210kgs Min.Sheet size(mm) : 25*40

Usage: Automatic numerator hot stamp machine can print serial number on seal, paper and plastic, like 00001 - 00003 and so on. Numerator can customize as 7 digit, 6 digit etc, hot foil printing machine can install 2pc numerators at the same time to print letter, company logo and serial number meanwhile, it's our new mechanization hot stamp machine. Specification: HC-HSN-811 Numerator gilding machine 1) Max print size: 8.2*11.4 inch (210*290 mm) 2) Worktable size: 12.6*15.7 inch (320*400mm) 3) Numerator print: automatically 4) Stroke of stamp head: 1.77 inch (45mm) 5) Max print speed: 1000pcs/hr 6) Foil feed: motor drive 7) Printing temperature: 0 to 350 8) Heating power: 1000W HC-HSN-711 Automatic numerator gilding machine 1) Max print size: 7.5*11.0 inch (190*280 mm) 2) Worktable size: 12.6*15.7 inch (320*400mm) 3) Numerator print: Automatically 4) Stroke of stamp head: 1.77 inch (45mm) 5) Max print speed: 1000pcs/hr 6) Foil feed: automatic 7) Printing temperature: 0 to 350 8) Heating power: 1000W HC-HSN-119 automatic bronzing machine 1) Max print size : 11.8*9.8 inch (300*250 mm) 2) Worktable size: 12.6*15. 7 inch (320*400mm) 3) Numerator print: automatically 4) Stroke of stamp head: 1.77 inch (45mm) 5) Max print speed: 950pcs/hr 6) Foil feed: motor drive 7) Heating power: 1000W 8) Printing temperature: 0 to 350

Usage: Automatic numerator hot stamping machine with moving table can print serial number and logo on security seals, Paper Gilding,, Leather Impression, Paper Concave-convex embossing, Cloth hot stamping, Plastics Bronzing, glass and metal Heat transfer, paper and plastic, like 00001, 00002, 00003 and so on. Numerator can customize as 7 digits, 8 digits etc, logo and serial number be printed once, it's newest design for serial number, customzied 2pcs moving worktable, 3200pcs per hour, the fastest on earth. Specification: HC-HN-2Table Serial Number hot stamp machine 1. Working table area:320 - 400mm 2. Max printing pressure: 2000 - 3000 Kg 3. Up and down distance: 45mm 4. Heat wattage: 1000W 5. Foil in feed: Motor Drive 6. Temperature adjustment: 0-300 7. Stamping Head drive: Pneumatic-drive 8. Foil collecting method: Motor-drive , Collecting time adjustable 9. Temperature controlling: Heating tube heat up Automatically temperature controlling, temperature free setting 10. Press adjustment way: Up-down of working table 11. Working table: shuttle type

Features: 1.This new design model is special for water transfer gold foil stamping. 2.Adopt the roller to heat stramping the foil on the water transfer paper. 3.Temperature, pressure, adjustable and stable speed, are depend on client¡¡¥s request. Packing size:2m*135cm*150cm G/w:908kg

Software compatibilityWindows driver Printing interfaceNetwork interface Max printing thickness90mm Max printing length297mm Max printing width210mm Speed30mm/sec Resolution300 dpi Medium typePvc card, paper, leather, sticky Notes , fabric, ribbon etc Application industriesGraphic hardcover, card design, sign, image, gift, personalized greeting card, celebration etc. PowerAc110~240v, 50~60hz Machine power300w Working voltageAc220v, 60hz Packing size95*48*73 Gw/nw50kg/35kg Features: Plateless or no dies, network output, personalized stamping, print a4 size one time.1.Control by air, stable printing force. 2.No need to move the printing media, print a4 size one time, fast and efficient. 3.Computer to plate and automatically identify the printing position. 4.Adopt the latest software program that can save the foil, low cost. Support windows office(like coreldraw, word) to print directly. Wooden case

High Speed Fully Automatic Hologram Hot Stamping Machine Suitable for Hot Stamping of Hologram/signature Label/Silver Foil Stamping/Scratch Foil Stamping, The Machine Consist, Loading Magazine with capacity of 300 to 350 Cards Depends upon The Thickness. Technical Specifications Applicable Material PVC/ IDI of ISO 7816 and other Plastic Material Thickness Of Material 0.7-0.9mm (ISO 7816) Size Of Material Standard Size ( As ISO 7816) Card Loading Input/output Tray Type Magazine Type Loading/unloading Capacity Of Cards 300 to 350 Cards Depends on Thickness Pressure Of Hot Stamping 0-1500kg Adjustable Hologram Core I.D. 1"(25.4mm) and 3"(76mm) Maximum Hologram Width 80mm Hologram Feeding PLC Controlled With /without Sensor Mark Registration/Touch Screen to adjust foil pull size. Hologram Type Metalized Polyester Hot Stamping Hologram / Continuous Design/Scratch foil. Air Pressure 5 To 7 Bar Heating Temperature 200°c Temperature Control s1.0°c (PLC Controlled) Precision Of Card Position s0.2mm Precision Of Film Position s0.1mm Production (Card Number) 6000 Cards/hr. Machine Running Hr/time Machine is Good To Run Up To 24 Hour Non Stop. Machine Working Environment Temp 20°c To 30°c Humidity -25% To 85% Power Supply AC380v 50/60Hz 3-phase 5 wire Control Type Touch Screen viz control panel Heating speed foil Registration pulling feeding etc. Power 3.0Icw Weight Approx. 700 Kg Dimension L1300xW600xH1450mm

Usage: This Hydraulic automatic large size hot stamping machine can print PVC, PET film, paper, diploma cover, card invitation letter, wedding card, folder, plastics, leather, book cover, gift, wood, film, electronic products, etc.Large pressure 20T suit for gilding and emboss on leather, plastic, wood, glass, paper and metal such flat things. Specification: HC-H-1115Hydraulic automatic hot stamping machine 1) Max print size: 12*16 inch (300*400 mm) 2) Worktable size: 20*16½ inch (300*420 mm) 3) Stamp head stroke: 2.76 inch (60mm) 4) Max print speed:1200pcs/hr 5) Foil feed: motor drive 6) Printing temperature:0 to 380â?? 7) Heating power: 500 W 8) Max pressure: 20 000 Kg ï¼?20Tï¼? HC-H-1515 Automatic big size hot stamp machine 1) Max print size : 15.7*15.7 inch (400*400 mm) 2) Worktable size: 19.6*25.6 inch (500*650mm) 3) Max print speed:1200pcs/hr 4) Stamp head stroke: 2.76 inch (70mm) 5) Heating power: 6*500 W HC-H-1519 Automatic high pressure bronzing machine 1) Max print size : 15.7*19.7 inch (400*500 mm) 2) Worktable size: 31.5*20.5 inch (800*520mm) 3) Max print speed: 1200pcs/hr 4) Stamp head stroke: 2.76 inch (70mm) 5) Heating power: 6*800 W HC-H-1523 Automatic plane hot stamp machine 1) Max print size : 15.7*23.6 inch (400*600 mm) 2) Worktable size: 31.5*20.5 inch (800*520mm) 3) Max print speed: 1200pcs/hr 4) Stamp head stroke: 2.76 inch (70mm) 5) Heating power: 6*800 W

Automatic bottle cap hot stamping machine, bottle cap printing machine, bottle cap printer Usage: automatic bottle cap hot stamping machine for bottle cap's top surfaceâ , speed can reach 4500pcsï¼�hr. Specification: Hc-ha-capt automatic bottle cap hot stamp machine r 1: total consume wattage: 2.2kw; 2. Stamping temperature rnange:20-300â°c; 3. Compress air pressure:0.6mpa; 4. Products diameter:dia:15-34mm l:25-60mm 5. Max stamping speed: 4500pcs/hr 6. Outer dimension: 210*140*230cm 7. Net weight: 800kg Features: 1. Silicon rolling foil stamping system for assuring perfect stamping quality. 2: fully automatic loading and feeding system for mostly degree of saving labor cost and most efficiency. 3: plc control system, with no caps no print, counting, code setting, maintenance, temperature control, automatic alarming system etc. 4: international famous pneumatic parts included japan smc cylinder, valves, â  germany omeron sensors etc. 5: japan and taiwan famous brand defoiler motor, stepper motor, vacuum pump motor etc.6: schneider or panosonic key electrical components 7. Safe protection device installed. 8: free technical and operation training available.

Usage: Automatic bottle cap hot stamping machine for bottle cap's Top Surface , speed can reach 4500pcs hr. Specification: HC-HA-CapT Automatic bottle cap hot stamp machine 1: Total consume Wattage: 2.2KW; 2. Stamping temperature Rnange:20-300 C; 3. Compress air Pressure:0.6MPA; 4. Products Diameter:DIA:15-34MM L:25-60MM 5. Max stamping Speed: 4500pcs/hr 6. Outer dimension: 210*140*230CM 7. Net weight: 800KG Features: 1. Silicon Rolling foil stamping system for assuring perfect stamping quality. 2: Fully automatic loading and feeding system for mostly degree of saving labor cost and most efficiency. 3: PLC control system, with no caps no print, counting, code setting, maintenance, temperature control, automatic alarming system etc. 4: International Famous pneumatic parts included Japan SMC cylinder, valves, Germany OMERON sensors etc. 5: Japan and Taiwan famous brand DEFOILER motor, STEPPER MOTOR, vacuum pump motor etc.6: SCHNEIDER OR PANOSONIC key electrical components 7. Safe protection device installed. 8: Free technical and operation Training available.

BHIs HOT STAMPING FOIL APPLICATOR suitable for hot stamping on Paper , the machine based on Cylinder Letter Press, available in all paper sheet sizes. The specification of the Original Printing Press Manufacturer are preserved and restored during manufacturing.

MJTJ-3-750, 930, 1040, 1100, 1200 Hot Stamping and Cutting Machine The series of model TYMB gilding, cutting & mark pressurized machine is product of new generation with clockwork precision and marked effect. It is used for gilding-printing all kinds of colored electro-chemical aluminum, marking a concave-convex die-cutting pictures, trade mark, advertisement of sample, boxes, cover of books and new year card, highly decorations and printing materials. It is the optimum equipment for printing, packing, decoration and plastic industries with materials including paper, cardboard, plastic, leather matters. Characteristics It adopts high quality material and high tension of casting It adopts four-shaft bevel wheel structure with steady operation, great cutting, low noise. Sound and layout of its height, great angle of frame. Electrical system is designed according to IEC standard. It has three functions for single slitting, successive slitting, time delay. Its can be adjusted. Safety protection system is reliable. Concentrated lubricating system. Main Specification Model Max.Platen Working Area Max.Gilding Printing Area Skip Order Range Working Pressure Foil-delivered Length Foil-delivered Group Working Speed Main Motor Overall Power Overall Dimensions Total Weight TYMB750 750*520mm 740*510mm Built-in Processing With Computer 100T 500mm 2groups 1380Time/h 2.2kw 10kw 2150*1400*1900mm 2500kg TYMB930 930*670mm 920*660mm Built-in Processing With Computer 170T 640mm 3groups 1320Time/h 4kw 13kw 2200*2000*1950mm 3500kg TYMB1040 1020*700mm 1020*700mm Built-in Processing With Computer 170T 700mm 3groups 1320Time/h 4kw 13kw 2230*2100*2000mm 4500kg TYMB1100 1080*780mm 1080*780mm Built-in Processing With Computer 220T 800mm 3groups 1200Time/h 5.5kw 19kw 2250*2200*2000mm 5000kg TYMB1200 1180*800mm 1180*800mm Built-in Processing With Computer 220T 800mm 3groups.

Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions..Shipping and transsportation

Hot stamping machine.

Industrial washing machine and dryers.