Homebrew Keg Disconnect Kit Cornelius Ball Lock Suppliers and Manufacturers

1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.

Layer Battery Cage model of extended height battery cages, provide the luxury of comfort and optimum space to the birds. Tesla series is particularly designed to make birds comfortable in the tropical climate, because it is provides more head room for the birds to get fresh air, even at the centre of the cage. This economical system is indigenously designed and made in India, considering the efficiency of poultry production. The manure unit consists of complete rubber coated rollers and heavy duty gears and sprockets made of steel with Robust manure start and end kit. It is fitted with 360 degree ball type nipples for optimum supply of drinking water to birds. The feeder trolley is accurately Calibrated so that only the desired quantity of Chicken Feed will be dispensed.

Our multi-directional 3 piece suitcase set benefits from brand new soft TPU and lubricating balls inside wheels, luggage moves very silent and smoothly with 360�° rotate double wheels. Product Specifications: Item number: JZ-19530002 Bran: Fochier/OEM Material: 100% ABS Lining: Polyester Wheels: Four 360 Degree Wheels Size: 20" 24" 28" luggage Product Features: * Lightweight hardside luggage * Aluminum telescoping handle * TSA combination lock * Four 360-degree Wheels * Convenient and secure packing

Blood Administration Set Product Code: MED 164 Specifications: Sterile, medical grade paper pouch with standard plastic film Size/Strength: 18G vein needle Tube Latex, 2.7 x 1500 mm pvc tube Description Adult, single-use blood administration sets 150 or 170-micron final filtration retains blood clots and potentially harmful particulates Swivel luer-lock patient connection system prevents accidental disconnects Soft, Smooth, Transparent Kink Free PVC Tubing for easy visualization of flow . Flow rate = 20 drops/ml Ergonomically shaped spike provides â??sure gripâ?? Non-Toxic & Non-Pyrogenic. 6% Taper Luer as per international standards. Accurate flow control.

Blood Administration Set Product Code: MED 164 Specifications: Sterile, medical grade paper pouch with standard plastic film Size/Strength: 18G vein needle Tube Latex, 2.7 x 1500 mm pvc tube Description Adult, single-use blood administration sets 150 or 170-micron final filtration retains blood clots and potentially harmful particulates Swivel luer-lock patient connection system prevents accidental disconnects Soft, Smooth, Transparent Kink Free PVC Tubing for easy visualization of flow . Flow rate = 20 drops/ml Ergonomically shaped spike provides â??sure gripâ?? Non-Toxic & Non-Pyrogenic. 6% Taper Luer as per international standards. Accurate flow control.

Supplier Sale Best Premium Cat Sand 100% Natural Sodium ball Coffee Scent Odour Lock Strong Clumping Bentonite Cat Litter Essential details Application: Cats Color: Gray Item Type: Cat Litter, Bentonite Cat Litter size: 1-3mm Material: Bentonite Product name: Bentonite Cat Litter Shape: Irregular Feature: Sustainable, Stocked, Eco-Friendly, Stocked, Sustainable Delivery Time: 10 Days Density: 0.4 - 0.5g/ml Size: Custom Fragrance: Nature,Peach,Charcoal,baby Powder,Apple,Lemon,Lavender,Rose OEM: Accept OEM Supply Ability: 2000 Ton/Tons per Month Packaging Details: Bagged Type Bentonite Cat litter Density Ball0.5-1.5mm; 1.0-3.5mm Lump: 0.5-2mm;0.8-3.8mm Shape Lump or Ball Dust â?¤0.5% Raw material Sodium Bentonite Color Custom Compressive stength 10N min Moisture 12% Water Absorption 400% Coagulability 400% Deodorization rate 70-90% Proportion 0.85g/ml Odor Original,Lemon,Apple,Rose,Jasmine Feature Strong condensation;customized odors

Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic

Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium

Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic

Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum

We specialise in providing a comprehensive range of auto parts & motor parts. Our commitment is to offer high-quality products that ensure optimal performance, safety, and reliability for all types of vehicles Here's a list of some of the auto parts we provide: 1. Engine Components: - Spark plugs - Oil filters - Air filters - Belts and hoses - Engine mounts - Timing belts/chains - Pistons & Rings 2. Braking System Parts: - Brake pads - Brake rotors/discs - Brake calipers - Brake lines - Master cylinders - Brake fluid 3. Suspension and Steering Parts: - Shock absorbers/struts - Control arms - Tie rod ends - Ball joints - Steering racks - Power steering pumps 4. Electrical Components: - Batteries - Alternators - Starters - Ignition coils - Wiring harnesses - Sensors (Oxygen sensors, ABS sensors, etc.) 5. Cooling System Parts: - Radiators - Water pumps - Thermostats - Radiator hoses - Cooling fans - Heater cores 6. Exhaust System Parts: - Exhaust manifolds - Catalytic converters - Mufflers - Exhaust pipes - Oxygen sensors - Gaskets and seals 7. **Transmission and Drivetrain Parts:** - Transmission fluid - Clutch kits - CV joints - Axles - Transmission mounts - Differential parts 8. Interior and Exterior Accessories: - Headlights - Tail lights - Mirrors - Wiper blades - Floor mats - Seat covers 9. Performance Upgrades: - Cold air intakes - Exhaust headers - Performance chips/tuners - Suspension lift kits - Turbochargers - High-performance brakes 10. Maintenance and Service Items: - Oil and lubricants - Filters (air, oil, fuel) - Sealants and adhesives - Cleaning and detailing products - Tools and equipment - Diagnostic scanners Our goal is to provide top-notch products, exceptional customer service, and competitive prices to ensure your satisfaction.

Application: Below are some common applications of POM plastic pellets: Machinery components� : POM is often used to produce machinery parts such as gears, shafts, ball bearings and bearings due to its high durability and good wear resistance. Bearings and gaskets� : POM is also used in the production of bearings, housings and gaskets in industrial machinery and equipment applications. Details in the automotive industry� : POM is often used in automotive applications such as doors, door handles, bolts, locks and other parts thanks to its high wear resistance and durability. Electronic and electrical tools� : In electronic and electrical applications, POM is often used for electrical insulation applications, such as isolators and structures that need to withstand high temperatures. Application in the production of toys and sports equipment� : POM is also used in the production of toys and sports equipment such as fishing rods, balls and other products due to its good durability and hardness. . Application in the food processing industry� : POM is often used for machine parts in the food processing process due to its good chemical resistance and abrasion resistance.