Fire clay & High Alumina bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes. Quality of Bricks: We offer various quality bricks are IS-6, IS-8, PI - 30% to 90% Alumina offering high temperature resistance of 1100 C to 1700 C. Standard Sizes (inch): 9*4.5*3 / 9*4.5*2.5 / 9*4.5*2 / 9*4.5*1.5 / 9*4.5*1 Side Arch / Side Tapper, End Arch / End Tapper Sizes (inch) 9*4.5*3/2.75 9*4.5*3/2.50 9*4.5*3/2 9*4.5*3/1.5
Shape Rectangular Material Refractory materials For Use in Floor Size (Inches) 9 In. X 4 In. X 3 In. Resistance Durability Fire Resistant
Color : Brown Shape : Square Width : 14 Inches Height : 14 Inches Material : Refractory materials
Usage : Interior Decor Material : Refractory materials Design Method : Factory Made Resistance Durability : Fire Resistant
Refractory Brick's Standard size ( 230x115x75 mm ) But we make all sizes of bricks as per Requirement. Alumina ( AlO) - 70 % The weight of bricks is 5.2 KG Bulk density (B.D) - 2.6 Apparent porosity % Max - 22 Ferric ( FeO) % Max - 2.5 Cold Crushing Strength - 500 kg/cm RUL Temperature % MAX - 1480 PLC Temperature % MAX - 1500
High alumina description generally means content of alumina percentage is higher than 45. Alumina is one of the most chemically stable oxides, and it offers excellent hardness, strength and spalling resistance. Alumina refractories are suitable for lining furnace operating up to 1850C. Alumina refractories have the advantages of a high resistance in oxidizing and reducing atmosphere and is extensively used in heat processing industries.
High Alumina Products
High alumina castable is a refractory castable made of high alumina raw material with binder and aggregate in traditional ratio.On the basis of the preparation of high strength and high aluminum castable, the granule gradation is adjusted, different admixtures are added, cement dosage is reduced, performance is improved, medium temperature strength and softening temperature under load are increased, thermal conductivity is reduced, and thermal stability is good.The furnace body structure integrity is strong, the air tightness is better than the brick furnace, extends the furnace life, saves the furnace repair cost, the economic benefit is remarkable as the high aluminum refractory castable characteristic.
High Alumina Refractory Cement is manufactured from Calcined Alumina and high purity lime. It is used as a binder for all types of castable refractories. Ashapura offers two ranges; HARB 50 and HARB 70 with minimum alumina content of 50% and 70% respectively.
Product Description: We are a trusted name in manufacturing fire bricks which are a block of ceramic material used in masonry construction. These are sized to be layered with one hand using mortar. Our fire bricks are made from fire clay which is widely used as refractory insulating bricks to maintain insistent temperature. Thee bricks are extensively used in lining furnaces, kilns, fireboxes, and fireplaces.
As per standards. Loose & Pallets
High alumina firebricks are classified according to the alumina content which is from lowest 48% to highest 95%, manufactured from mineral of bauxite, corundum, etc. By mixing, press-forming, drying, sintering and machining. High alumina bricks feature stable mechanical strength and thermal shock resistance, with high refractoriness of no lower than 1880¡æ, high alumina bricks are commonly used as refractory lining exposed to heat directly or backup insulation linings in various types of industrial kiln or laboratory furnace. Wooden pallets
High alumina brick Al2o3>80% Bulk density>2.67g/cm3 Cold crushing strength>70mpa Common shaped and irregular shaped. Wooden pallets
Our company located in yangquan city, shanxi province, china, and yanquan city is one of the Largest refractory material base in china. We are in position to supply various kinds of Refractory bricks, such as high alumina and fireclay bricks, insulating bricks etc With the catalogue as follows: 1. Fireclay brick 2. High alumina brick 3. Insulating brick 4. Unsintered phosphate brick 5. Al-c sliding plate 6. Nozzle 7. Hollowwares 8. Refractory mortar 9. Refractory castables 10.Other refractory material.
For hot blast stoveFor eaf roofFor general use Goods no.Ghha65,Ghha55,Ghha48,Rhs,Rh1,Rh2Al,75Al-1Al-2 Al2o3(%) min655548807565756555 Refractoriness( ) min179017701750185018001790179017901770 Refractriness under load 0.2 mpa( )150014701420155015301520152015001470 Apparent porosity (%) max_191922232322 Ccs (mpa)min4944.139.278.568.658.8544944.1 Shrinkage after reheating 1500x2h (%) max+0.1-0.4+0.1-0.4+0.1-0.4+0.1-0.4+0.1-0.4+0.1-0.4+0.1-0.4+0.1-0.4+0.1-0.4.
1. Product Description The alumina grinding ball has been widely used in ball mills as abrasive media for ceramic raw materials and glaze materials in ceramic factories, cement factories, enamel factories and glass work owing to the excellence of high density, high hardness, high wear resistance. During the abrasive/grinding processing, ceramic balls will not be broken, it will not pollute the 95%material to be grinded. 2. Type According to the content of aluminum: 60-70%, 65-75%, 92%, 95%. According to the specification: 10mm-75mm. 3. Features: 1) High density. 2) High hardness. 3) Very low wear resistance. 4) Widely used for milling minerals and ceramics. 5) High efficiency, lower cost 6) Three kinds of high alumina grinding balls and one kind of alumina lining available. 7) High alumina grinding balls (white surface and body): a) Usual Al2O3: 92% b) Density: 3.62 - 3.65g/cm³ c) Grinding lose (abrasion): 0.015% (0.15g/kg.h) d) Applications: milling and grinding any kind and color of ceramic materials and minerals, including sanitary wares, white glaze materials, iron ores, and copperores e) We call it white ball 8) High alumina grinding balls (white yellowish surface and body): a) Usual Al2O3: 65 - 70% b) Density: 2.90 - 3.05g/cm³ c) Grinding lose (abrasion): 0.03% (0.3g/kg.h) d) Applications: milling and grinding any kind and color of ceramic materials, including sanitary wares and white glaze materials e) We call it yellowish ball 9) High alumina grinding bricks and lining (white surface and body) a) Usual Al2O3: 92% b) Density: 3.58 - 3.65g/cm³ c) Grinding lose (abrasion): 0.015% (0.15g/kg.h) d) Applications: milling and grinding any kind and color of ceramic materials and minerals, including sanitary wares, white glaze materials, iron ores, and copperores e) We call it white brick or white lining. 25kg/bag or 1MT/bulk bag.
High Alumina Bricks for general uses are made from bauxite of super quality, bonding chamotte and additives. It is noted for good erosion resistance high refractorinessthermal shock resistance and accurate dimension. They were widely accepted in various kilns ,thermal equipment of metallurgy, petroleum, chemical industrysuch as high aluminum bricks for blast furnaces steel ladle and electrical furnace and so on .
Al2o3 73%, fe2o3 .3% pce more than 31 norton. 50 kgs.
Product: 92% alumina ball Specification: 30 mm, 40mm, 50 mm, 60mm Bulk density:í²3.6 g/cm3 Wear rate:ín0.12íd Hardness:8-9 mohs Compression strength:í²2000 Water absorption:ú+0.01 Color:white Packing: 25kg/bag, 1.25ton/pallet, 25ton/container.
RP-99 is widely used as catalyst and adsorbent bed support in refining, petrochemical and gas processing applications, where low silica content or high density is required. Available sizes: 3mm, 6mm, 10mm, 13mm, 19mm, 25mm, 38mm, 50mm, 75mm Chemical composition: SiO2 í_0.20% Al2O3 í¦99.2% CaO 0.08% TiO2 0.05% MgO 0.05% K2O 0.04% Na2O 0.09% leachable Iron less than 0.01% Physical properties: Free volume (%) 40 Water absorption (wt. %) ú+3 Hardness, Mohsí» ú+8 Particle density ( gm/cc ) 3.5 Bulk density (kg/m3) 1900-2100 Maximum operating temperture(íµ) 1800 Crush Strength size Crush strength, lbs(kg) 3mm (1/8í¦) 200 (90) 6mm (1/4í¦) 450(205) 10mm (3/8í¦) 880 (400) 13mm(1/2í¦) 1870 (850) 19mm(3/4í¦) 2860(1300) 25mm(1í¦) 3740(1700) 30mm(1-1/4í¦) 3740(1700) 38mm(1-1/2í¦) 4840(2200) 50mm(2í¦) 5500 (2500).
