This good-looking and high performance HID 10 inch cutter suction dredger is preform vital dredging works in Abu Dhabi river. This model is used for sand and mud dredging in small lakes, rivers and channels. In terms of power system, can use hydraulic power system or electrical power system. It is also considered an environmental protection dredger which saves water pollution caused by the hydraulic oil system. The dredger is very portable which can be lift down to the river by one crane, easy launching and maintenance. PARAMETERS Flow capacity:1400m3/h Dredging depth: 10m Discharge distance: 1000M Discharge diameter: 300mm Main engine: 447KW Cummins Hydraulic System: Dension (Parker) /Vickers Operation system: PLC Siemens Dredging materials: Sand, Mud This set of cutter suction dredger can be packed into 6 containers for container shipping, whole dredger is dismountable and suitable for railway, road transportation.
This dredger is designed and built according to the enterprise standard of China ZC classification society. The whole hull is constructed with the best material including CCS marine plate ad seamless high manganese steel pipe structure. Equipped with a patented cutter head. A bright engine room with conditioning and adjustable seats designed for dredger operators. PARAMETERS Flow capacity:900m3/h Dredging depth: 6m Discharge distance: 1000M Discharge diameter: 250mm Main engine: 298KW Cummins Hydraulic System: Dension (Parker) /Vickers Operation system: PLC Siemens Dredging materials: Sand, Mud This Dredger is used for sand mining in Sea areas and can also be used for a wide range of dredging projects. Such as port maintenance, land reclamation, lakes and reservoirs dredging, environmental dredging, sand mining, and more. The whole ship is dismountable, all components can be packed in 3 containers for transportation by road, railway, and shipping, saving your freight costs.
The rising global population means the will be greater demand for safe, economic and sustainable logistics over the coming decades. The maintenance of ports, canals and water ways is there for an important activity for HID and its customers. As sufficient port capacity is vital for economic growth, the maintenance of ports and their approaches must provide a constant navigable water depth. The maintenance of the water depth also helps to protect river valleys from flooding The customer purchased the dredger for Davao port desiltâ?? ing and expansion of his own container terminal and has plans to further develop the local desilting market. PARAMETERS Flow capacity:2200m3/h Dredging depth: 14m Discharge distance: 1500M Discharge diameter: 400mm Main engine: 721KW Cummins Hydraulic System: Dension (Parker) /Vickers Operation system: PLC Siemens Dredging materials: Sand, Mud PRODUCT ADVANTAGE In consideration of cost and safe delivery, we maximize the use of containers to send products to the customer. For this reason, we have made corresponding improvement to the product design and production scheme, so that most parts can meet the requirements of container transportation. For example, the floating body is usually in two sections, but the product adopts the design of three sections; the traditional cab size cannot be loaded into the container, so we specially ordered the cab with detachable eaves.
This HID-CSD-5522 CSD dredger is used in Niyama resort, the Maldives for the construction of the airfield project. The construction period is 1 year, and the project was completed on time. HID Cutter Suction Dredger is responsible for pumping sand from the sea and reclaiming to make land. It works 16 hours a day, works in 2 groups of people, and replaces work every 8 hours. The construction of the airport project was completed on schedule and was highly praised by customers and local leaders. It also opened the market for the successful sale of Chinese dredgers to the Maldives. PARAMETERS: Flow capacity: 3500â??4000m3/h Dredging depth: 14m Discharge distance: 2000M Discharge diameter: 550mm Main engine: 1193KW Cummins Hydraulic System: Dension(Parker) /Vickers Operation system: PLC Siemens Dredging materials: sand/mud/rocks/coral reefs These 5522 models are working in more than 70 countries and regions including India, Indonesia, Dubai, Malaysia, Bangladesh, Nigeria, Maldives and more. With the recent rise demand in Egypt dredging, a few sets of our high end cutter suction dredger has been ordered and finished manufacturing, we look forward to start dredging in Egypt. With our service stations in Egypt, on-time after sales services has win our Egyptian client' s heart.
HID Cutter Suction Dredger dredging equipment are reliable, fuel efficient, have low maintenance costs and are extremely productive at all dredging depths. It is known for offshore dredging, river dredging, land reclamation, port deepening, port widening, channel dredging and many more. This China cutter suction dredger can achieve 5000 m3/h output capacity, production capacity with 8000-20000m3 in per effective working day. HID CUTTER DREDGER ADVANTAGES Dismountable and transportable over land Allows for single-handed operations Easily customisable with a wide range of optional equipment Low emissions and environmentally-friendly operation Can acquire BV, GL, ABS, RINA, CCS.ZC ship building certificate The design of our Cutter Suction Dredger is continuously improved using the latest technological developments and feedback from customers. In addition, we have dredging consultant from Holland and Brazil, they are constantly assist us to improve our dredge quality. HID-CSD 6024P Introduction Single dredge pump can reach 1500m discharge distance. Successfully exported to more than 40 countries and regions This cutter suction dredger can achieve 5000 m3/h output capacity, production capacity with 8000-20000m3 in per effective working day. Total installation power is 1795 KW.
This set of large capacity CSD will be used for hard materials dredging such as harsh sand, gravels, in Abu Dhabi, The cutter head power is 700KW. Equipped with DGPS system to monitor and prospect the underwater dredging areas. The maximum navigation area of this dredger is near sea navigation area, which is used for dredging and reclamation of cosatal, port, and inland waters, navigation and water conservancy engineering construction as well as dredging of lakes. PARAMETERS: - Discharge distance: 3000M - Flow capacity: 7000m3/h - Discharge diameter: 730mm - Main engine: 2900KW MWM - Hydraulic system: Dension (Parker) / Vickers - Operation system: PLC siemens - Dredging materials: Hard soil Gravels Coral reefs The dredger developed with innovative technology, according to the standard of China ZC classification society. Manufactured with the best materials in the market and come out of the hands of our experienced welders which they equipped with CCS welding certificate. Constructed with CCSA steel plate, equipped with dual engine, total installed power of 1976KW. Fitted out with anchor boom, spuds carriage ssystem, ensure the dredger can carry out its tasks effectively.
Different capacity drying noodle making machine ,fresh noodle making machine long noodle making machine paste Italy noodle spaghetti making machine : Name Model & Parameters Qty set Note Automatic Hang Noodle Making Machine 5-260model, machine size 3*0.6*1.2m, voltage 380V,3KW, weight 440kg, capacity 150-200kg/h 1 Attached 3pcs cutter. 100 pcs hanging noodle poles Welcome order !
Dredging for sand in quite a lot of countries such as Malaysia, Nigeria for sand selling and supply the construction industry is becoming increasingly important. All of our cutter suction dredgers are suitable for sand mining, the differience is in its capacity, in this case, our client was satisfied with 3000m3.H capacity, with the daily working time of 10 hours, daily solid sand production is 6000m3/H. PARAMETERS Flow capacity: 3000m3/h Dredging depth: 14m Discharge distance: 1500M Discharge diameter: 450mm Main engine: 895KW Cummins Hydraulic System: Dension (Parker) /Vickers Operation system: PLC Siemens Dredging materials: Sand In addition to the CSD, we also equipped with sand washing machine connected with the dredger to form an integrated solution where the outcoming sand is ready to be in the market.
Stryker is a well-known company that specializes in medical technologies, including surgical equipment and devices. Suction systems are commonly used in medical settings to remove fluids, blood, or debris during surgical procedures. Here are some general considerations: StrykeFlow II: This could be a specific model or version of a suction system provided by Stryker. Suction System: Suction systems are essential in medical procedures to maintain a clear surgical field by removing unwanted fluids and materials. Applications: Suction devices are used in a variety of medical settings, including surgery, endoscopy, and other procedures where maintaining a clear visual field is crucial.
lnfant Mucus Extractor Product Code: MED 148 Specifications: Sterile, individually packed in peelable pouch pack Size/Strength: Chamber Capacity 25 ml, Catheter Size 10 FG Description Manufactured from nontoxic, medical grade polymer. Transparent Chamber for visual examination of the content. Catheter is provided with round open tip for non-traumatic intubation. Proximal end of suction tube is provided with Funnel shape connector for easy connection to the suction equipment. Also, available with Filter and without Filter Models
Suction Catheters Product Code: MED 106 Specifications: Sterile, individually packed in blister pack Size/Strength: Plain 500 mm L | TC 480mm L | FT 470 mm L | Automatic 500 mm L 5 mm-Grey, 6 mm- Green, 8 mm-Blue, 10 mm-Black, 12 mm-White, 14 mm-Green, 16-mm Orange 18-mm Red 20 mm Yellow Description Manufactured from nontoxic, non-irritant medical grade PVC Compound. Distal end is open with one lateral eye for effective drainage. Proximal end is provided with connecter for easy connection to the suction equipment. Funnel connecter are color coded for instant size identification. Provided with vacuum control facility in Finger Tip Control and Thumb Control models. Available with graduation.
Zimmer Biomet is a company known for its orthopedic and musculoskeletal medical devices, but information about specific products and models can change, and new products may have been introduced since then. In the context of medical devices, a skin graft mesher is a tool used in plastic and reconstructive surgery to create a mesh pattern on skin grafts. This meshing allows for better contouring and coverage of larger areas when grafting skin. The exact specifications of a mesher cutter can vary, including the size and pattern of the mesh created. To obtain accurate and up-to-date information about the specific Zimmer Skin Graft Mesher Cutter, I recommend the following steps: Official Zimmer Biomet Channels: Check the official Zimmer Biomet website or contact their customer support directly. The company's official channels are likely to provide the most accurate and current information about their products. Product Documentation: If you have access to the product documentation or packaging, it should contain detailed information about the mesher cutter, its specifications, and its intended use. Medical Professionals or Facilities: If you are associated with a medical institution or healthcare facility, inquire within your organization. Medical professionals and facilities often have direct access to product information. Authorized Distributors or Suppliers: Reach out to authorized distributors or suppliers of Zimmer Biomet products. They may be able to provide information about the specific mesher cutter in question. Online Medical Product Databases: Some online medical product databases or catalogs may provide information about specific medical devices. Check reputable medical supply platforms for details.
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
China's first large capacity dredge vessel with a working weight of 1300T is designed and manufactured by HID Dredging Equipment for Indonesia customers for Tin ore mining in the sea. The Tin Ore Mining Equipment is produced under the international quality ISO9001:2015, constructed with seamless high manganese steels, CCSA marine steel plate welded, and is robust and reliable. PLC Siemens operating system with the highly integrated system composed of DGPS system to monitor and prospect the under- water dredging areas. It integrates dredging, mining, and selecting functions in one vessel. Handling capacity is 700T per hour and modern machine parts that have anti-wearing, high-efficiency advantages. It has been successfully delivered to Indonesian customers, which has greatly promoted the development of the offshore mining industry. PARAMETERS Total Length:95m Pontoon Depth:2.8m Breadth:17.5m Flow Capacity:2000m'/h Dredging Depth:50m Working Weigh:1300T Handing capacity:700T/H
The JLCSD-150 Cutter Suction Dredger of steel construction, non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers, with similar conditions to that in navigation area “A” or below the “A”-line specified in code for inland river steel engineering ship manufacture of P.R.China. The dredger can be used to excavate and transport cohesive sediment below the class ? specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P.R.China. In the course of technical designing, we have considered special requirements for local tropical climate conditions such as meteorological and waters distributing state etc. It’s hull consists of a main pontoon and two side pontoons, which is to be easy to dismantle or mount for transportation by road, rail or water, and is to be easy to reassemble at project site.The engines and dredge pump are located in the center pontoon,the 2 side pontoons serve as fuel bunkers,ballast tanks and storage tanks. The dredger is powered by diesel engines. The main diesel engine is to drive the dredge pump, and in the free part of the engine, one set of power distributor is equipped, to supply power for all other equipments such as cutter, swing and ladder winches, and the spud rams etc. The spacious control cabin is ergonomically designed with 360 degree view. All the operation buttons, swifts, indicators, gauges are equipped on the control desk. Only two operators can control all the dredger in the operation room. The dredger is painted by 4 layers of marine paint to protect from the corrosion. The ZINC anode can be used to give better anti-corrosion function.
These dredgers are highly flexible in use. The modular structure and tight design allow the dredgers to work even in shallow river and waterways. Different arrangements of sand pumps and cutters make sure the dredgers can work in different circumstances like sand , stones, mud , etc. In container or bulk ship. Our field engineer will guide to assemble the machine at your working site and train your staff.
Standard dredging depth:12-14m Water fl Dimensions:22*6.4*2
This kind of machine mainly used in excavation, reclamation and dredging of the coast, rivers, reservoirs and canal, etc. Working capacity: 100-500 m©/hflow:1000-5000m©/h Engine: 180-1600kw The discharge distance: 500-6000m Dredging depth:
20 inch cutter suction dredger Type: jlcsd-500 Principal characteristics Overall length*width*depth 44*9.0*2.5m Main pontoon(length*width*depth) 20*4.4*2.4m Maximum standard dredging depth 18m Maximum mixture capacity 4500m3/h Discharge distance 3000m Dredge pump 22/20” Power at shaft 1090kw Driven through hydraulic coupler Engine Diesel engine: jichai h12v190zlc1 1580kw Cutter Power at motor 250kw Size 1800mm Rotation speed 30rpm Winches Ladder winch 1 unit Swing winches 2 units All winches driven by independent hydraulic system. Spuds Length 22m Diameter 630mm In container