Heat Transfer PU film of Premium quality which gives a soft hand feel and a strong grip. It is highly flexible and widely used for T-shirts, Athletic jackets and Outdoor wear etc.
- Thin and soft touch
- Highly flexible and elastic
- Easy to cut and weed
- Good wash resistance
Colors : 33 Normal colors and 5 Neon colors
Size : 50CM x 50M per roll
Packing : 1 roll in a carton box
Transfer Parameters
- Temp. : 140C~150C
- Time : 8~10 seconds
- Pressure : 3~4 atm
- Peeling : Warm
Packing including It comes with 8 sheets of puffy heat transfer vinyl in one pack, the size is 10"x12", and the colors are white, black, red, yellow, fluorescent green, fluorescent orange, fluorescent yellow, and fluorescent pink
Paper used to heat transfer the image to a T-shirts etc.
Grammage: 35-100gsm
Reels: 1540/1600mm*100m-200m
Sheets: A4 or according to your specification.
9513 Heat Transfer Vinyl : Pu Film Suppliers
Short on time? Let Heat Transfer Vinyl : Pu Film sellers contact you.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
The Jalapeno is variously named in Mexico as huachinango and chile gordo. The cuaresmeno closely resembles the Jalapeno. The seeds of a cuaresmeno have the heat of a Jalapeno, but the flesh has a mild flavor close to a green bell pepper.
As of 1999, 5,500 acres (22 km2) in the United States were dedicated to the cultivation of Jalapeno s. Most Jalapeno s are produced in southern New Mexico and western Texas.
Jalapeno s are a pod type of Capsicum. The growing period is 70–80 days. When mature, the plant stands two and a half to three feet tall. Typically a plant produces twenty-five to thirty-five pods. During a growing period, a plant will be picked multiple times. As the growing season ends, Jalapeno s start to turn red.
Once picked, individual peppers ripen to red of their own accord. The peppers can be eaten green or red.
Jalapenos have 2,500 - 8,000 Scoville heat units. Compared to other chillies, the Jalapeno has a heat level that varies from mild to hot depending on cultivation and preparation. The heat, caused by capsaicin and related compounds, is concentrated in the veins (placenta) surrounding the seeds, which are called picante. Handling fresh Jalapeno s may cause skin irritation. Some handlers wear latex or vinyl gloves while cutting, skinning, or seeding Jalapeno s. When preparing Jalapeno s, hands should not come in contact with the eyes as this leads to burning and redness.
Jalapeno is of Nahuatl and Spanish origin. The Spanish suffix -eno signifies that the noun originates in the place modified by the suffix, similar to the English - (i) an. The Jalapeno is named after the Mexican town of Xalapa (also spelled Jalapa). Xalapa is itself of Nahuatl derivation, formed from roots xal-li "sand" and a-pan "water place."
A Jalapeno plant with pods. The purple strips on the stem are anthocyanin, due to the growth under blue-green spectrum fluorescent lighting.
Five Jalapeno peppers.
- A chipotle is a smoked, ripe Jalapeno.
- Jalapeno jelly can be prepared using jellying methods.
- Jalapeno peppers are often muddled and served in mixed drinks.
- Texas Toothpicks are Jalapeno s and onions shaved into straws, lightly breaded, and deep fried.
- Jalapeno Poppers, also called Armadillo eggs, are an appetizer; Jalapeno s are stuffed with cheese, usually cheddar or cream cheese, breaded and deep fried.
Product Name:POF shrink film wrap
Thickness:From 8mic-38mic / customized
Width:From 150-3000mm/customized
Material:100% virgin polyolefin material
Transparency:High Clear and High Transparent
Colors:From 1 to 8 colors/ customized
Other customized service:Size; Colors;LOGO; Packing;OEM etc.
Modes of packing:Packed in standard cartons
Finishing Time:
<1000KGS, 3-5 days;
<23000KGS, 10-15 days;
20''/40'' FCL within 4 weeks
Application:
1. Food Packing like vegetables, fruit and sweety food;
2. Product Packing like electronic products, daily life products, medical products, etc.
Pear sweet and sour, cold, into the lungs, stomach; with Sheng Jin, Runzao, heat, phlegm, hangover effect; for fever or Yin caused by dry cough, thirst, constipation Disease, can also be used for internal heat caused by polydipsia, cough, sputum yellow embolism.
Pear fruit: Sheng Jin, Runzao, heat, phlegm and other effects, apply to the heat of the disease thirst, diarrhea, heat cough, phlegm fever, chucking, thirsty mutiny, red eyes and throat, indigestion The
Pear skin: pure heart, lungs, Reduce Pathogenic Fire, Sheng Jin, Zishen, replenishing effect. Roots, foliage, flowers have lungs, phlegm heat, detoxification effect.
Pear seed: pear seed contains lignin, is an insoluble fiber, can be dissolved in the intestines, the formation of a film like a colloid, can be combined with cholesterol in the intestines and excluded. Pears containing boron can prevent women with osteoporosis. When boron is abundant, memory, attention, mental acuity will increase.
Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13
Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months
Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.
Specificatin:
grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3
AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.
Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.
Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max
Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.
Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
per annum. Price for volume over the MoQ 30 Million boxes is negotiable. Payment by L/C 100% at sight, transferable, irrevocable and confirmed.
Product Name: Disposable Vinyl/Nitrile Blended Examination Gloves
Single use, non-sterile, no measuring, Latex free
Sizes: XS, M, L. XL. XXL
Color: Blue, Green
Structure: 5 fingers, beaded cuff for easy donning, ambidextrous
Surface: Smooth
The Vinyl/Nitrile Blended glove is a new type of synthetic glove that was
developed based on the vinyl glove production technology. Its material is
compounded with PVC paste and Nitrile latex, so the finished production has
the advantage of both PVC and Nitrile gloves.
Comparing with the vinyl gloves, the Vinyl/Nitrile Blended glove can better
satisfy the users demands, it feels softer, more flexible and more
comfortable when wearing.
Intended purpose: The examination glove is disposable non-sterile device
intended for medical purpose that is worn on the examinerâ??s hand or finger
to prevent contamination between patient and examiner.
Medical Device Quality Management System EN ISO 13485 Certificate,
ISO 9001 Quality Management System Certificate - 2 FDA
FDA Registration Information - 510K
Product 510K
Biocompatibility Test Report
EU CE Certificate (DOC, Technical Documentation Review Report
)
Product Name: Disposable Vinyl/Nitrile Blend Examination Gloves
One-time use, no sterilization, no latex
Single use, non-sterile, Latex free
Model: S, M, L, XL
Sizes: S, M, L, XL
Color: blue, green, black, etc.
Color: Blue, Green, Black etc.
Structure: 5 fingers, with curling, regardless of left and right hands
Structure: 5 fingers, beaded cuff for easy donning, ambidextrous
Surface type: smooth surface
Surface: Smooth
Features :
PVC/nitrile synthetic gloves are made of PVC resin and nitrile latex material. The product has PVC and
The double advantage of nitrile gloves. The Vinyl/Nitrile Blend gloves is compounded with
PVC paste and Nitrile latex, and the finished product has the advantage of
both PVC and Nitrile glove.
The donning feeling is better than vinyl gloves.
Much softer than vinyl gloves
Sturdy, wearable, longer wearing time than nitrile gloves
The wearing time is longer than nitrile gloves.
Has good wet hand wearability, easier to wear than nitrile and PVC gloves
Easy donning with wet hands and easy donning than nitrile &vinyl gloves.
PU coating, free of protein, effectively reduces the risk of allergies
PU coating, with no protein in it, allergy risk is reduced effectively.
Has better protection, has better acid resistance, alkali resistance and oil resistance
Better protection, good resistance of acid, alkali and oil.
Better cost-performance
CURIA YG is a Vegan, Gluten-Free, Plant-based and Non-GMO starch used as curdling and thickening agent in Yogurt and Lassi. No addition of preservative and Mono sodium Glutamate in the starch.
APPLICATIONS
1. First add 2% to 10% of CURIA- YG based on the Protein Content of the Milk in cold (40C to 360C) condition. Dissolve it well without Lump formation.
2. Heat the milk mixer to 850 c & hold it for 12 minutes with continuous stirring.
3. Cool the pasteurized milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture.
4. Then keep it in an incubator @ 430c for 6 hours and transfer it to chiller.
OR
1. Add 2% to 10% of CURIA- YG based on the Protein Content of the hot milk at 800C to 850C and stir continuously for 2 minutes without lump formation
2. Cool the milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture.
3. Then keep it in an incubator @ 430c for 6 hours and transfer it to chiller.
DOSAGE
For excellent results, use 2 to 10% CURIA-YG of total batch size, based on the Protein Content of the Milk. For Lower Protein Content in the Milk higher Curia-YG NEED TO BE USED.
CURIA YG (P33) is a special curdling and thickening agent for yogurt and lassi. It has no added preservative and Mono sodium Glutamate.
FEATURES AND BENEFITS
â?¢ 100% Natural. Protein and carbohydrate derivative.
â?¢ Improves thickness.
â?¢ Improves smooth texture.
APPLICATIONS
1. First add 2% to 3 % of CURIA- YG(P33) to the milk in cold (40C to 360C) condition. Dissolve it well without Lump formation.
2. Heat the milk mixer to 850 c & hold it for 12 minutes with continuous stirring.
3. Cool the pasteurized milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture.
4. Then keep it in an incubator @ 430 c for 6 hours and transfer it to chiller.
LAS 5NF is a Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO starch used as curdling and thickening agent in Flavored milk,Ice cream,Gelato,Cottage cheese, Vegan Cheese,Sour cream,Whipped cream and Vegan butter. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
1. First add 4% to 10% of LAS 5NF based on the Protein Content of the Milk in cold (4�°C to 36�°C) condition. Dissolve it well without Lump formation.
2. Mix 10% of extra water to total mix and heat the milk mixer to 85�°c & hold for 12 min with continuous stir .The product is settle down when stir is not good.
3. Cool the pasteurized milk to 43�°c to 45�°c with slow stir and then add required quantity of culture and stir it slowly for even mixing of culture.
4. Then keep it in an incubator @ 43�°C for 6 hours and transfer it to chiller.
DOSAGE
For excellent results, use 4 to 10% of LAS 5NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 5NF need to be used.
Oxidized starch - TS is a Chemically Modified, Vegan, Gluten-Free, Plant-based, Non-GMO tapioca starch. Oxidized starch is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. Oxidized starch is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
FUNCTIONAL PROPERTIES
Oxidized starch forms highly thixotropic pastes with stiff texture, which is related to its gelling capability
Low gelatinization temperature and viscosity, clarity, and soft gel texture are attributes of oxidized starch used in breading and related applications
When heated in water, Oxidized starch form clear fluid sols. On cooling, however, the sols made by cooking oxidized starch are more stable or resistant to thickening and forming gels or pastes
Oxidized starch is used in formulated products. They also are used in starch batters and in breaded foods, where they improve adhesion of the batter to meat and fish
Gum confections made with oxidized starch have longer shelf life, better gelling characteristics, increased clarity, better taste, and quicker drying
Used in batters and breading for coating various food stuffs, in confectionery as binders and film formers, in dairy products as texturizers
Oxidized starch is often used for coating, sealing, batter binding, emulsification, and dough conditioning in baking and other food products.
9513 Heat Transfer Vinyl : Pu Film Suppliers
Short on time? Let Heat Transfer Vinyl : Pu Film sellers contact you.
