We are pleased to deliver HDPE gas pipe and HDPE electrofusion fittings, HDPE Pipe Floats, if any doubt to the quality of our products, we will certify to deal with it within 24hours upon receiving the quality objection.
Features
1.Non-toxic.The HDPE material is non-toxic and tasteless.
2.Low flow resistance. The Smooth inner wall is easy for pipeline transportation .Under the same condition, HDPE pipeâ??s delivery capacity can be increased by 30%, as its roughness is much less than that of steel pipe and glass reinforced pipe.
3. No Leakage. HDPE pipe is connected in the ways of butt fusion, socket fusion and electrofusion, which means the strength of joint point is higher than tube itself .
4. Excellent Flexibility. HDPE pipes could be coiled for the small diameter products. Also, it could be slightly bended for the large diameter products, which will be much more convenient in the construction site.
5.Good resistance ability for scratch. HDPE pipe is 4 times the wear resistance of steel pipe, which means HDPE pipe has longer service life and better economical efficiency.
6.Convenient for construction. PE pipe could be installed in a variety of trenchless ways, so it is very convenient for construction and installation.
7.Long life-span. Designed 50 yearsâ?? service life under rated temperature and pressure.
8.Lower operation and maintenance costs. HDPE pipe is not only convenient to transport and install, but also greatly reduce the workerâ??s labor intensity and improve work efficiency.
Tengyuan can supply municipal engineering pipe, dredging engineering pipe, HDPE Gas Pipe, Power Engineering Pipe, Mining Pipe and agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development.
Application:
HDPE gas pipe is suitable for the gas conveying pipe system whose operating temperature range from -20â?? to -40â?? and long time maximum working pressure no more than 0.7 MPA.
HDPE pipes regrind from gas pipes manufacturer, post industrial, not wash and clean materail, don't have info MFI
No xldpe, 5 loads per month.
Mixed color black/orange/yellow
We can do full load more quickly if combine most of yellow & some tons of black or mixed color.
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
Taian Henson Metal Co lTD
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube
OD 20~405mm in theory
Thickness 1.2~15.7mm
Length Any Length Below 16 Meter
Standard GB,ASTM,BS,EN,JIS
Material Chinese Grade, Q195, Q215 Q235, Q345
ASTM, Grade B,Grade C,Grade D,Grade 50
EN, S185,S235JR,S235JO,E335,S355JR,S355J2
JIS, SS330,SS400,SPFC590
Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery
Ends
Plain, Beveled, Thread With Couplings Or Sockets;
Plastic Caps And Steel Rings Can Be Provided If Possible
Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment
Technique Hot Rolled Or Cold Rolled ERW
Package Covered With Tarpaulin, Containers Or In Bulk
Origin: United States
Code: 2025820BN
Material: HDPE pipe PE100 shredded Black
Category: HDPE
Type: pipe PE100 shredded
Color: Black
Quantity: 36 Tons
Loading weight: 18 Tons
Specification:"HDPE pipe PE100 shredded black
MFI: 0.3
Unwashed. But clean. No dust, no oil.
Sizes are 0.5 inch to 1.5 inch
Packing: Jumbo bags
Subject to unsold"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
535145 Hdpe Gas Pipe China Suppliers
Short on time? Let Hdpe Gas Pipe China sellers contact you.
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder
We produce and sell steel pipes, carbon steel pipe, GI pipe, carbon steel pipe , SS pipes and Spiral steel pipe in long term.
Our factory have plenty of steel in stock and customers can find the right products.
Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.
We are mainly for customers to provide a variety of pipelines. The pipes we sell include plastic pipes, PVC pipes, HDPE pipes, LDPE pipes, PE pipes, PPR pipes, PC pipes, ABS pipes, PA pipes, PU pipes, hoses, soft tubes, all kinds of plastic granule materials, and recycled regrind materials. Gi pipes, stainless steel pipes, seamless pipes, MS pipes, carbon steel, composited pipes, water tubes, corrugated pipes, fittings, valves, flanges, nuts, and screws. And other environmental plastic and stainless steel pipes
for residential construction households. With meeting international standard quality, the pipes are of different thicknesses, lengths, and applications.
Type - Disposable/ Refillable
Shape - Stick
Size - J5 / J6 / J23 / J25 / J26
Color - Multi-color
Dimension - 76.7mm*21.9mm*10.8mm
Material - ABS & AS, Plastic, Steel and Metal
Rate of Leaking - Less Than 0.3%
Rate of Inflaming - Over 98%
Resit Water - 55 C
50 pieces in a single tray , 20 trays / carton ,63
cartons / palette ,23 pallets /20'FCL.
- Smooth and bright without trace of scratch or shrunken signs
- The rate of inflaming is over 98%, the inferior lighters is under 0.6%
- The time of continual inflaming can reach 2 minutes
- The tank would not explode when falling down within 1.5 meters high
- Plastic lighters,refillable, good hand feeling, Competitive price & high quality, Cheap price
Type - Disposable/ Refillable
Shape - Stick
Size - J5 / J6 / J23 / J25 / J26
Color - Multi-color
Dimension - 76.7mm*21.9mm*10.8mm
Material - ABS & AS, Plastic, Steel and Metal
Rate of Leaking - Less Than 0.3%
Rate of Inflaming - Over 98%
Resit Water - 55 C
50 pieces in a single tray , 20 trays / carton ,63
cartons / palette ,23 pallets /20'FCL.
- Smooth and bright without trace of scratch or shrunken signs
- The rate of inflaming is over 98%, the inferior lighters is under 0.6%
- The time of continual inflaming can reach 2 minutes
- The tank would not explode when falling down within 1.5 meters high
- Plastic lighters,refillable, good hand feeling, Competitive price & high quality, Cheap price
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
We supply various types of UPVC pipe fittings including welded fittings there are two kinds of welded and nonwelded socket welded and threaded fittings flange fittings
Ball valve straight pipe straight elbow forward Tee pipe clamp abnormal straight reducing elbow cross loose jointpipe cap copper inner wire straight copper inner wire Tee outer wire direct head loose joint direct head loose elbow
1 Fittings used for connecting pipes are flange loose joint pipe hoop clamp sleeve throat hoop etc
2 Fittings change the direction of the pipe elbow bend pipe
3 Fittings change the diameter of the pipe reducing diameter reducing pipe reducing elbow branch pipe reinforcing pipe
4 Fittings increase the pipe branch tee crossing
5 Fittings for pipe sealing gasket raw material belt thread flange blind plate pipe plug blind plate head welding plug
6 Fittings for pipe fixing clamp ring tow hook hanging ring bracket bracket pipe clamp etc
